Good call on checking the BB ted and I may go to 170 on the crank for the smidge of leverage gain.
I also found this slick new White Industries Track Hubset which would mate well with the DOS ENO: https://www.benscycle.com/p-1524-white-industries-track-hubset-fixfree-32h-120mm.aspx? >From what I can tell, it seems that Fixed Gear hubs are differentiated from Track hubs based on rear spacing of 130 vs 120 (the QB span) respectively. On Friday, March 7, 2014 12:33:13 AM UTC-5, ted wrote: > > All sounds very nice. > Shorter cranks are traditional track gear. Where 175 may be normal for mtn > bikes and 170 normal for road bikes, 165 is sort of normal for a track bike. > With a single ring and normal single speed chain line you shouldn't have > any trouble with clearance between the ring and frame. If you are using > standard geared bike ring and chain, chain line is not really all that > critical. If you do want to get chain line just so, the phil bb and its > two ended adjustment is real handy. Mounting your chosen crank on the bb > that came in your frame will let you decide what length bb you want to use. > Just measure the line you get with the one thats already there, and adjust > accordingly before ordering a new one. > > On Thursday, March 6, 2014 7:20:38 PM UTC-8, djbardwil wrote: >> >> I am blocked at work from checking the RBW postings and tonight I found I >> couldn't wait to get home to check - thanks Patrick (dig the shirt much), >> ted, Pudge, David and Minh for your perspectives. >> >> And with that, the order by which to choose components and considerations >> seems: >> >> 1) Crankset - single ring makes sense; modest number of teeth, between 40 >> and 46; I like the Sugino RD and it comes in 165mm arm (I am a short legged >> being), with choice of 46t or 48t. Many of you have a lower # of teeth but >> I need to start somewhere. Not sure of the RD's chainline (i've seen >> conflicting 44 or 42) but as close to the rear hub / cog chainline as >> possible. >> >> 2) Bottom bracket - my QB came with a 113mm but each crankset has its own >> recommended BB mm. The Sugino RD, with 130 BCD, is coupled with a 103mm >> BB. If I go with Sugino's recommended 103mm, which is lower than Riv's >> 110mm general recommendation, must I worry about ring clearance against the >> frame? >> >> 3) Hubs - Not sure which brand to go with. I saw these on Ben's: >> https://www.benscycle.com/p-3458-milwaukee-bicycle-co-hubset-32h-fixfree.aspx >> They achieve a 42mm chainline and have a classic look without breaking >> the bank, but i am not wedded to these. >> >> 4) Rims Velocity Synergy 650b with DT double butted spokes. >> >> 5) Cog - with a 46t ring, a 17t cog achieves 70". Again - a good place >> to start. I live in an area that is pretty flat with a few rolling hills >> but nothing too steep. I really like the WI DOS ENO 2-Speed 17/19 from a >> quality and versatility perspective. >> >> The fact that, for a lot of you, the QB is your favorite among many other >> great Rivendells (I have a Custom, Atlantis and Sam) is exciting - each of >> mine serves a different purpose and I never get tired of them. >> >> Thank you again for your help! >> >> >> >> >> On Thursday, March 6, 2014 9:09:06 PM UTC-5, cyclot...@gmail.com wrote: >>> >>> I have a WI 17/19 on mine, and really like that option. Gives just >>> enough difference at times. But I rarely go to the 32T front chainring. >>> >>> Cheers, >>> David >>> >>> "it isn't a contest. Just enjoy the ride." - Seth Vidal >>> >>> >>> >>> >>> >>> On Thu, Mar 6, 2014 at 2:16 PM, Allingham II, Thomas J < >>> thomas.a...@skadden.com> wrote: >>> >>>> I agree with Minh that when you’re on a SS, it changes your >>>> perspective. I just don’t mind walking if the need arises – just another >>>> pleasant way to get where I’m going. >>>> >>>> >>>> >>>> *From:* rbw-owne...@googlegroups.com [mailto: >>>> rbw-owne...@googlegroups.com] *On Behalf Of *Minh >>>> *Sent:* Thursday, March 06, 2014 4:50 PM >>>> >>>> *To:* rbw-owne...@googlegroups.com >>>> *Subject:* [RBW] Re: Mini-Beam >>>> >>>> >>>> >>>> My QB came with the 40x26, ended up moving it to my SH as i never >>>> bothered shifting to the 26. I now use a single 42, it may depend on your >>>> terrain, but i can handle hills fine, and those i can't i just get off and >>>> walk, it's not that big a deal. >>>> >>>> >>>> >>>> i have a WI Dos FW 17/19, and even that i rarely switch. a >>>> single-speed changes your perspective, it's hard to understand coming from >>>> a multi-gear bike. i strongly suggest you get the bike rideable as soon >>>> as >>>> possible and see what works for you. >>>> >>>> >>>> >>>> i ride 42/17, i'm not the strongest rider but it works for me! >>>> >>>> >>>> >>>> also concur with Tom, QB is my favorite bike in the bunch. >>>> >>>> On Wednesday, March 5, 2014 9:14:40 PM UTC-5, djbardwil wrote: >>>> >>>> The more I hear about the fixed gear bicycle experience, the more it >>>> seems that putting on a 2 speed kickback hub is missing the point. It >>>> seems that dialing in on the gearing is half the fun - it's a bike for >>>> tinkerers. >>>> >>>> >>>> >>>> My QB originally had the Sugino XD Double; does the double chainring >>>> typically get used in both rings or do most just keep it on the larger 40 >>>> ring with the 26 ring for the rare occasion? I'm wondering if a single >>>> crank like the Sugino RD with either a 46 or 48 ring is best. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Wednesday, March 5, 2014 12:48:51 PM UTC-5, Esteban wrote: >>>> >>>> Oh, yea. I have a QB too. Had one years ago, too big. This one, just >>>> right. 40x16 free 15 fixed. 68" gets me up almost any hill in town (with >>>> some zig zag), and I try to spin out on flats for "exercise." >>>> >>>> >>>> Its a fantastic bike. You'll love it. Everyone should have one :) >>>> >>>> >>>> Esteban >>>> >>>> San Diego, Calif. >>>> >>>> On Thursday, February 27, 2014 12:04:36 PM UTC-8, Philip Williamson >>>> wrote: >>>> >>>> I have a Quickbeam. I'm obsessed with gearing, and always come back to >>>> about a 72". Currently I'm re-enamored of fixed gear riding, with a single >>>> 44t ring, a 15t cog and a 17/21 dingle cog. >>>> >>>> >>>> >>>> I do have a Sachs Automatic wheel with a coaster brake, and I agree >>>> that the coaster brake messes up my mojo. I have considered the S2 (no C) >>>> hub, and will probably build one at some point. The Quickbeam is great - >>>> I'd ride mine anywhere, in any terrain, on any surface. >>>> >>>> >>>> >>>> Philip >>>> >>>> www.biketinker.com >>>> >>>> >>>> >>>> >>>> On Thursday, February 27, 2014 8:42:58 AM UTC-8, djbardwil wrote: >>>> >>>> >>>> >>>> Pudge - If I go with the SA 2 speed, it would be without coaster brake. >>>> >>>> >>>> >>>> Minh - You are right on the argument. Simple and pure is what I want >>>> with this build as well as a new perspective on riding. A broadening of >>>> horizons.... >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Thursday, February 27, 2014 11:37:38 AM UTC-5, Minh wrote: >>>> >>>> Just a thought, when i got my QB, i also was (unnecessarily) worried >>>> about gearing, additional speeds and now that i've had it i never both >>>> switching in the rear (WI DUO) and switched to a single-ring front. if >>>> you >>>> have the wheels already to get it on the road, you might be surprised at >>>> how fast you adjust to a single gear. >>>> >>>> >>>> >>>> nothing wrong if you really want to mess with the SA 2 speeds, but >>>> there is something pure about a single-speed QB that changes your >>>> perspective on riding. >>>> >>>> On Wednesday, February 26, 2014 10:54:23 PM UTC-5, djbardwil wrote: >>>> >>>> Well, I am thrilled to be the very lucky winner of the auction and >>>> admit my addiction to Rivendell. I was a bit surprised that only one bid >>>> came through but it is a small frame and the dead of winter so the >>>> audience >>>> may have been limited. Apparently, there are only 30 of these 50 cm QBs. >>>> It should be a great project and I intend to take it slowly and >>>> thoughtfully as I've never built up a non-derailleur bicycle. Initial >>>> thought was to possibly try out the Sturmey-Archer 2-speed Kickback hub as >>>> the basis of a wheel build and possibly a Sturmey-Archer crankset but I'll >>>> need to do some homework on gearing, spacing, chainline etc. Nothing is >>>> set in stone at the moment and each component will be a new decision point >>>> but, barring the possible S-A components, it will clearly be a Rivendell >>>> build when it's done. >>>> >>>> >>>> >>>> I enjoy this group very much and value your input, stories, and >>>> camaraderie. Photos will prove the project is underway! >>>> >>>> >>>> >>>> Thanks - >>>> >>>> David >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rbw-owners-bun...@googlegroups.com. >>>> To post to this group, send email to rbw-own...@googlegroups.com. >>>> Visit this group at http://groups.google.com/group/rbw-owners-bunch. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> ------------------------------------------------------------------------------ >>>> >>>> **************************************************** >>>> >>>> To ensure compliance with Treasury Department regulations, we advise >>>> you that, unless otherwise expressly indicated, any federal tax advice >>>> contained in this message was not intended or written to be used, and >>>> cannot be used, for the purpose of (i) avoiding tax-related penalties >>>> under >>>> the Internal Revenue Code or applicable state or local tax law provisions >>>> or (ii) promoting, marketing or recommending to another party any >>>> tax-related matters addressed herein. >>>> **************************************************** >>>> **************************************************** >>>> >>>> This email (and any attachments thereto) is intended only for use by >>>> the addressee(s) named herein and may contain legally privileged and/or >>>> confidential information. If you are not the intended recipient of this >>>> email, you are hereby notified that any dissemination, distribution or >>>> copying of this email (and any attachments thereto) is strictly >>>> prohibited. >>>> If you receive this email in error please immediately notify me at (212) >>>> 735-3000 and permanently delete the original email (and any copy of >>>> any email) and any printout thereof. >>>> >>>> Further information about the firm, a list of the Partners and their >>>> professional qualifications will be provided upon request. >>>> **************************************************** >>>> ============================================================================== >>>> >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rbw-owners-bun...@googlegroups.com. >>>> To post to this group, send email to rbw-owne...@googlegroups.com. >>>> Visit this group at http://groups.google.com/group/rbw-owners-bunch. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
