You will have no problems installing a 130 wheel in a 135 frame; or vice versa. I've put 110 mm hubs in 126 mm frames (squeeze!).
On Sun, Dec 5, 2010 at 8:54 PM, Kentileguy <ken_y...@sbcglobal.net> wrote: > Lots of great input. Thanks! According to Riv's sizing chart I'm right > between a 57 and a 59. I bought Homer used, so I didn't have much > choice. On the plus side, it was local, like new and reasonably > priced. I have no regrets about buying it and after alot of tweaking I > think the fit is just about right. The 7cm stem is probably not ideal > and I am a little leery about squeezing the 135mm rear triangle around > a 130mm hub. I'm not fixated on weight, but I was very surprised at > how much different the lighter wheelset felt. I've considered the Ram > (there's a sweet 58cm orange one on ebay right now), but I thought it > might be too similar to the Homer. Ideally I would test ride a Ram & > Roadeo side by side to be able to form my own opinions, but there's > little chance of that happening, so I'm relying on the collective > wisdom of the group. > Thanks, Ken > > On Dec 5, 9:09 pm, Bruce <fullylug...@yahoo.com> wrote: >> .8/.5/.8 was what they used on Toyo Rams for TT and DT. Isn't Rodeo a tad >> lighter? >> >> ________________________________ >> From: cyclotourist <cyclotour...@gmail.com> >> To: rbw-owners-bunch@googlegroups.com >> Sent: Sun, December 5, 2010 9:00:45 PM >> Subject: Re: [RBW] Re: Roadeo vs AHH. Your thoughts? >> >> Yeah, I just don't remember, but thought they were the same tubing...??? >> >> On Sun, Dec 5, 2010 at 6:31 PM, Bill M. <bmenn...@comcast.net> wrote: >> >> According to one member of our club (he may chime in here), the Roadeo >> >> >he has now is built lighter than the Ram he once owned. I believe >> >that Homer would be heavier than either. >> >> >Bill >> >> >On Dec 5, 5:07 pm, cyclotourist <cyclotour...@gmail.com> wrote: >> >> Are you sure that the Roadeo has lighter tubing? I thought at some point >> >> the discussion was that they both are built with 8-5-8 maintubes. >> >nch?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW at resumespecialt...@gmail.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
