> > I talked to Vince at Riv again today. So apparently the issue is that the > bike was designed with the bridge as far away as possible to max out the 57 > mm brakes. Unfortunately the bridge was made with the bridge 1 mm too far > out so that the pads won't quite clear the tire without filing out the hole > a bit (like Patrick mentioned doing on his custom). >
Based on the feedback I got here and from Vince and from carefully considering what I really want, I've opted to just wait until the in-spec frames are delivered in November or December. I'm lucky to have a Clem and a Homer to ride in the mean time so I'll wait for the road bike that I really want rather than settle for something just because I can get it now. Thanks to you all for helping me work through this and from helping me not make the decision I would regret! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
