My PBH is 93 and I ride a 65cm Redwood, but i think either size would
work for you. The AHH uses fatter tires (by default anyway), and if
you plan to do much rough riding, I think a size smaller is better. If
I were getting an Atlantis or Bomba, I'd probably get more like a 62.

Another factor is the bar height - you won't be able to get it more
than 1cm below saddle height on the 65, if you like 'em low-ish by Riv
standards. If you always want them at or above the saddle, get the 65.

Bill


On Saturday, January 23, 2010, Howard (Denver)
<howard.michal...@gmail.com> wrote:
> My PBH is 92.7, and I'm curious to what standover height and framesize
> would be recommended for an AHH frame?  I'm 6ft 1.5in tall.
>
> Looks like the 63 (with 88.8 Standover) would give me about 3.9 cm
> (1.6 in) of clearance; while the 65 (with 90.7 Standover) would give
> me 2 cm (just under an inch) of clearance.
>
> Mostly riding for city commuting and weekend touring; occaisonal
> packed/maintained dirt or rough pavement out in the hills but 95%
> pavement.
>
> In reading the Riv website; they mention the consumer products "crotch
> clearance" of an inch.   With the Riv method of measuring PBH (pressed
> way up onto one's pubic bone) it seems the 63 would be right.  1.6
> inches of clearance to the pubic bone would mean the inseam of my
> pants will probably touch the bar when standing on both feet over the
> frame (which I don't mind at all.)  The <1 inch clearance on the 65
> seems a little tight.
>
> But then again, I most interested in fit/feel while riding.
>
> Thoughts??
>
> TIA! Howard
>
> --
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To post to this group, send email to rbw-owners-bu...@googlegroups.com.
> To unsubscribe from this group, send email to 
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> For more options, visit this group at 
> http://groups.google.com/group/rbw-owners-bunch?hl=en.
>
>

-- 
Bill Connell
St. Paul, MN

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to