Hey John. If you are the original owner of the hub AND that was the first time it was built up AND there was nothing funky about the build, I would press for more from White. It is a premium MUSA product and that shouldn't have happened. Flange breakage is normally from inappropriate lacing patterns (ie. radial), reusing a previously laced hub and changing the spoke orientation or a severe impact. It doesn't sound like any of that applies...
FWIW, Doug On Thu, Jul 27, 2017 at 11:09 AM, John Stowe <stowe.j...@gmail.com> wrote: > Erl: The Erie Canal was a great route for a family tour, and it helped > that it was so well-supported. My four year old always had another activity > to look forward to - museums, boat rides, or at least a rest stop with > copious snacks - so there was suprisingly little grumpiness! Definitely > recommended. > > Patrick: I did send the photo to White, and got a reply suggesting that, > well, it happens sometimes. Undecided whether to press - there was > certainly nothing strange about the build (super thick spokes, radial > lacing, etc.). > > Eric: You're either looking at the "spider" for the larger end of the > cassette, or at the rubber mounting straps for this speed sensor: > http://www.wahoofitness.com/devices/bike-sensors/bluetooth-speed-sensor I > got sick of aligning magnets, bumping a fork/chainstay sensor out of > position, etc. so switched to this one, which uses an accelerometer (now > cheap thanks to cell phones). Mounted on the rear because people have > reported interference from dynamo hubs. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
