Thanks, Wade.  I had to take a chance on the tape.  I wasn't sure the shade of 
blue would look okay, and I couldn't find it locally so I ordered some and 
crossed my fingers...B-)  

Steve

-----Original Message-----
From: rbw-owners-bunch@googlegroups.com
[mailto:rbw-owners-bu...@googlegroups.com]on Behalf Of Wade Vidal
Sent: Monday, January 18, 2010 8:48 PM
To: rbw-owners-bunch@googlegroups.com
Subject: Re: [RBW] Quickbeam finished!


Your bike looks great. I really dig the bar tape.
----- Original Message ----- 
From: "Frederick, Steve" <frede...@mail.lib.msu.edu>
To: "Rbw-Owners-Bunch (E-mail)" <rbw-owners-bunch@googlegroups.com>
Sent: Monday, January 18, 2010 9:00 AM
Subject: [RBW] Quickbeam finished!


I finished up my Quickbeam this last weekend and took it out for a quick 12 
miles during a warm (upper 30's) snap on saturday.  I'm really happy with 
the way it rides and the fit is great, too!  My other Rivs are 54cm but I 
wanted a QB with 650b wheels so I took a chance on the 52cm and it's okay. 
The Tech. Deluxe stem's not even at the max height.

I set it up as a 3-speed with a 16t fixed cog on one side, a Dos Eno 17-19 
freewheel on the other and the stock 32/40/chainguard crankset.  The gearing 
is okay with the exception of the low gear--32X19 is just too low, I think. 
I was twiddling like mad and barely doing 11mph!  We just don't have the 
extended climbs in this area to justify such a low gear, unfortunetly.

Since 32 is the biggest 74mm BCD ring made, I might have to lose the stock 
triple crank with ring guard setup, and switch to a more conventional 110mm 
BCD, 36-40 ring combo up front.  I think a 36X19 low gear would be about 
right...

Anyway, I put my favorite bartape on it, Fizik brand, in the metallic blue 
and I think it looks pretty good.  More pics in an outdoor setting once the 
sun reappears in, say April...B-(  The rear fenderline's wonky of course, to 
give room for shifting gears!

Couple of Rec Room pics:

http://www.flickr.com/photos/40738...@n08/4283362608/

http://www.flickr.com/photos/40738...@n08/4282618103/


Steve Frederick, East Lansing, MI



--------------------------------------------------------------------------------


> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To post to this group, send email to rbw-owners-bu...@googlegroups.com.
> To unsubscribe from this group, send email to 
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> For more options, visit this group at 
> http://groups.google.com/group/rbw-owners-bunch?hl=en.
>
>
> 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.


Reply via email to