John I mounted my front fender using a daruma bolt trying to gain as much clearance as possible. The outside arm of the tectro brake interfered with the ridge profile of the fender. I attempted to peen some clearance but to get enough I messed up the profile of the fender. After buying a replacement I went to a Paul racer brake on the front and that gave me the clearance I needed. In the closed position I could have made the tectro work it was the released position that gave me problems. Trying to gain clearance in the open position led to the fender screw up. I had no problems with the tectro on the rear. I'm comfortable with the tire clearance I have but I ride roads all the time. If I were doing a lot of trail I would set up differently.
Disclosure: < 12 fender installs. Howard Livonia Mi -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
