You don't mention anything about the steering tube, fork crown, head tube surfaces so I'm assuming that it shipped with a headset installed. However, even it it did, I found out the hard way on my Ram that the fork crown seat for the bottom cartridge bearing was not cleaned of paint or primer and I had a hell of time getting it off when it came to replacing the old one after it had gone "index." Someone should have sanded the paint off and greased the steering tube before installation.
On Friday, July 1, 2016 at 9:33:51 AM UTC-5, Bob B wrote: > > I'm building up a Riv myself and am wondering for others with > Waterford-made frames (mine's a Hunqapillar) — how much if any thread > chasing did you need to do to build up the frame? > > I'm thinking BB threads, canti brake studs, derailleur hanger, water > bottle bosses, fender and rack mounts, etc. > > I didn't ask Riv to do any of this, and the frame is on it's way, so it's > too late to ask! > > Thank you, > Bob > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
