I've respaced two hubs recently for a couple of 135 Riv builds, both using new Shimano 105 130mm rears. Extra 5mm spacer on the left side (right next to the current 5mm spacer), re-center the axle so there's 2.5mm sticking out on each side, redish and works wonderfully. Can be done with 105s and Ultegras. I would imagine a Dura-Ace would work the same way but I don't have one in front of me.
Phil Roberts Chandler, AZ On Wed, Sep 23, 2009 at 7:30 AM, Cycletex <clifwrightpho...@yahoo.com>wrote: > > Would a pie plate be necessary to re-space from 130 to 135? I'm about > to re-space a dura ace hub for a "go fast" I'm building. > > > > On Sep 23, 8:50 am, JoelMatthews <joelmatth...@mac.com> wrote: > > Your LBS should have some decent quality axle spacers. > > > > With a little effort - two spacers on the axle, one freewheel guard to > > pull out the low gear far enough for the derailleur to hit > > consistently (Bikesnobnyc will mock me for riding with a pie plate - > > but I would rather be able to hit the gear than look cool) - I was > > able to use new old stock 126 Maxi-Car hubs on my Bruce Gordon Rock 'n > > Road tour. > > > > It should take less effort for what you propose. > > > > On Sep 22, 6:10 pm, BEN STAGGS <staggsb...@msn.com> wrote: > > > > > Hi, can a Atlantis accept an Ultegra 700c rear wheel? This is a > standard road bike wheel. > > > > > sincerely yours, Ben S. > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
