Thanks. One of the reasons I asked is because I have a set of the Cane
Creek/Tektro levers ready to go.  I have them on my Bleriot and really
like the feel...I might swap the calipers anyway just cause I like the
name Bigmouth!

On Feb 16, 10:13 pm, Horace <max...@sdf.lonestar.org> wrote:
> Yes, this will work. The additional clearance of the quick release at the
> caliper, plus the quick release at the lever, will give you plenty of
> clearance to remove an inflated Ruffy Tuffy. I had this setup on my Romulus
> for a while.
>
> However, I eventually got the Bigmouths because they looked nifty. The quick
> release on the Bigmouths _alone_ is sufficient to clear a fully inflated
> Jack Brown tire on the Romulus's stock Araya rims.
>
> The Bigmouths are only about $10 more than the Cane Creek levers with the
> quick release. My personal preference would be to swap the calipers rather
> than the levers (I didn't have that choice when I got the levers, because
> the Bigmouth calipers didn't exists yet), because the Cane Creek levers are
> a little unusual in their shape, and take a little getting used to. If you
> find the hoods of the Shimano levers too cramped, then you'll probably like
> the Cane Creeks. But if you are comfortable with your handlebar setup, then
> go with the Bigmouths.
>
> Horace.
>
> On Mon, Feb 16, 2009 at 9:37 PM, rob markwardt <robmar...@hotmail.com>wrote:
>
>
>
>
>
> > Hi,
> >  My new Rambouillet is equipped with the standard Shimano side pulls
> > w/quick release and Shimano levers without a quick release...I don't
> > know the model but they look like the regular Shimano models that were
> > on most of the Rambos.  Running 30+ mm tires, with the quick release
> > open, I dont have enough clearance to slip in an inflated tire.
> >   Question.  If I swapped the non quick-release Shimano levers for
> > some Tektros with a quick release would that increase the opening of
> > the brake calipers....clear as mud??...In other words would I gain any
> > additional tire clearance or are the calipers just not built to go any
> > wider?  If not anybody tried the Bigmouths?
>
> > Thanks
> > Rob Markwardt- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to