Just disovered I bent the Pitlock shaft on my seatpost binder.  Didn't
think I was tightening it up _that_ much.  Did find a 5mm bolt that
seems to work better on that bike.

If two bikes didn't have Pitlocks already, would try a set of the
Zefal.

Eric Platt
St. Paul, MN

On Feb 5, 10:07�am, Jim Thill - Hiawatha Cyclery <thill....@gmail.com>
wrote:
> The pitlock seatpost binders are designed to work with bicycles that
> use the old style q/r binder bolt. Works great on my 84 Stumpjumper
> and on a similar vintage Trek MTB that I worked on. They don't
> generally work with seatpost clamps that are not part of the frame,
> and they don't tend to work on integral clamps that are designed to be
> used with a bolt.
>
> On Feb 5, 9:41�am, JoelMatthews <joelmatth...@mac.com> wrote:
>
>
>
> > I have pitlock skewers. �I was unable to get the pitlock seat post
> > binders to work on several of my bikes, however. �So I just ordered a
> > couple of the Zefal binders. �Will report back once they arrive.
>
> > On Feb 5, 9:32�am, Seth Vidal <skvi...@gmail.com> wrote:
>
> > > On Thu, Feb 5, 2009 at 10:14 AM, Rick <richardholc...@yahoo.com> wrote:
>
> > > > I just put them on the bleriot. �They function as intended - you can't
> > > > work the quick release until the bike get's flipped over. �As far as
> > > > the strength goes, I gave it a serious, braced against the wall pull
> > > > just to check them out, and it didn't budge.
>
> > > Does anyone know what the mechanism is made of? Maybe I need to buy
> > > one and find out if a magnet will 'flip' the internal switch.
>
> > > -sv- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to