Hi Qianfan,
Good idea indeed to turn this driver into a more generic one. If
possible, its best to re-use code rather than adding new.
On Wed, May 10, 2023 at 12:30 PM <qianfangui...@163.com> wrote:
From: qianfan Zhao <qianfangui...@163.com>
This patch adds minimal support for AXP-221 PMU and connect it to
bananapi M2U board.
Signed-off-by: qianfan Zhao <qianfangui...@163.com>
---
hw/arm/Kconfig | 3 +-
hw/arm/bananapi_m2u.c | 6 +
hw/misc/Kconfig | 2 +-
hw/misc/axp209.c | 238 -----------------------------------
hw/misc/axp2xx.c | 283
++++++++++++++++++++++++++++++++++++++++++
hw/misc/meson.build | 2 +-
hw/misc/trace-events | 8 +-
7 files changed, 297 insertions(+), 245 deletions(-)
delete mode 100644 hw/misc/axp209.c
create mode 100644 hw/misc/axp2xx.c
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index b7a84f6e3f..bad4ea158c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -355,7 +355,7 @@ config ALLWINNER_A10
select ALLWINNER_WDT
select ALLWINNER_EMAC
select ALLWINNER_I2C
- select AXP209_PMU
+ select AXP2XX_PMU
select SERIAL
select UNIMP
@@ -378,6 +378,7 @@ config ALLWINNER_R40
bool
default y if TCG && ARM
select ALLWINNER_A10_PIT
+ select AXP2XX_PMU
select SERIAL
select ARM_TIMER
select ARM_GIC
diff --git a/hw/arm/bananapi_m2u.c b/hw/arm/bananapi_m2u.c
index 1d49a006b5..9c5360a41b 100644
--- a/hw/arm/bananapi_m2u.c
+++ b/hw/arm/bananapi_m2u.c
@@ -23,6 +23,7 @@
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "hw/boards.h"
+#include "hw/i2c/i2c.h"
#include "hw/qdev-properties.h"
#include "hw/arm/allwinner-r40.h"
@@ -61,6 +62,7 @@ static void bpim2u_init(MachineState *machine)
{
bool bootroom_loaded = false;
AwR40State *r40;
+ I2CBus *i2c;
/* BIOS is not supported by this board */
if (machine->firmware) {
@@ -104,6 +106,10 @@ static void bpim2u_init(MachineState *machine)
}
}
+ /* Connect AXP221 */
+ i2c = I2C_BUS(qdev_get_child_bus(DEVICE(&r40->i2c0), "i2c"));
+ i2c_slave_create_simple(i2c, "axp221_pmu", 0x34);
+
/* SDRAM */
memory_region_add_subregion(get_system_memory(),
r40->memmap[AW_R40_DEV_SDRAM], machine->ram);
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 2ef5781ef8..efeb430a6c 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -176,7 +176,7 @@ config ALLWINNER_A10_CCM
config ALLWINNER_A10_DRAMC
bool
-config AXP209_PMU
+config AXP2XX_PMU
bool
depends on I2C
diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c
deleted file mode 100644
index 2908ed99a6..0000000000
--- a/hw/misc/axp209.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * AXP-209 PMU Emulation
- *
- * Copyright (C) 2022 Strahinja Jankovic
<strahinja.p.janko...@gmail.com>
- *
- * Permission is hereby granted, free of charge, to any person
obtaining a
- * copy of this software and associated documentation files (the
"Software"),
- * to deal in the Software without restriction, including without
limitation
- * the rights to use, copy, modify, merge, publish, distribute,
sublicense,
- * and/or sell copies of the Software, and to permit persons to
whom the
- * Software is furnished to do so, subject to the following
conditions:
- *
- * The above copyright notice and this permission notice shall be
included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * SPDX-License-Identifier: MIT
- */
-
-#include "qemu/osdep.h"
-#include "qemu/log.h"
-#include "trace.h"
-#include "hw/i2c/i2c.h"
-#include "migration/vmstate.h"
-
-#define TYPE_AXP209_PMU "axp209_pmu"
-
-#define AXP209(obj) \
- OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU)
-
-/* registers */
-enum {
- REG_POWER_STATUS = 0x0u,
- REG_OPERATING_MODE,
- REG_OTG_VBUS_STATUS,
- REG_CHIP_VERSION,
- REG_DATA_CACHE_0,
- REG_DATA_CACHE_1,
- REG_DATA_CACHE_2,
- REG_DATA_CACHE_3,
- REG_DATA_CACHE_4,
- REG_DATA_CACHE_5,
- REG_DATA_CACHE_6,
- REG_DATA_CACHE_7,
- REG_DATA_CACHE_8,
- REG_DATA_CACHE_9,
- REG_DATA_CACHE_A,
- REG_DATA_CACHE_B,
- REG_POWER_OUTPUT_CTRL = 0x12u,
- REG_DC_DC2_OUT_V_CTRL = 0x23u,
- REG_DC_DC2_DVS_CTRL = 0x25u,
- REG_DC_DC3_OUT_V_CTRL = 0x27u,
- REG_LDO2_4_OUT_V_CTRL,
- REG_LDO3_OUT_V_CTRL,
- REG_VBUS_CH_MGMT = 0x30u,
- REG_SHUTDOWN_V_CTRL,
- REG_SHUTDOWN_CTRL,
- REG_CHARGE_CTRL_1,
- REG_CHARGE_CTRL_2,
- REG_SPARE_CHARGE_CTRL,
- REG_PEK_KEY_CTRL,
- REG_DC_DC_FREQ_SET,
- REG_CHR_TEMP_TH_SET,
- REG_CHR_HIGH_TEMP_TH_CTRL,
- REG_IPSOUT_WARN_L1,
- REG_IPSOUT_WARN_L2,
- REG_DISCHR_TEMP_TH_SET,
- REG_DISCHR_HIGH_TEMP_TH_CTRL,
- REG_IRQ_BANK_1_CTRL = 0x40u,
- REG_IRQ_BANK_2_CTRL,
- REG_IRQ_BANK_3_CTRL,
- REG_IRQ_BANK_4_CTRL,
- REG_IRQ_BANK_5_CTRL,
- REG_IRQ_BANK_1_STAT = 0x48u,
- REG_IRQ_BANK_2_STAT,
- REG_IRQ_BANK_3_STAT,
- REG_IRQ_BANK_4_STAT,
- REG_IRQ_BANK_5_STAT,
- REG_ADC_ACIN_V_H = 0x56u,
- REG_ADC_ACIN_V_L,
- REG_ADC_ACIN_CURR_H,
- REG_ADC_ACIN_CURR_L,
- REG_ADC_VBUS_V_H,
- REG_ADC_VBUS_V_L,
- REG_ADC_VBUS_CURR_H,
- REG_ADC_VBUS_CURR_L,
- REG_ADC_INT_TEMP_H,
- REG_ADC_INT_TEMP_L,
- REG_ADC_TEMP_SENS_V_H = 0x62u,
- REG_ADC_TEMP_SENS_V_L,
- REG_ADC_BAT_V_H = 0x78u,
- REG_ADC_BAT_V_L,
- REG_ADC_BAT_DISCHR_CURR_H,
- REG_ADC_BAT_DISCHR_CURR_L,
- REG_ADC_BAT_CHR_CURR_H,
- REG_ADC_BAT_CHR_CURR_L,
- REG_ADC_IPSOUT_V_H,
- REG_ADC_IPSOUT_V_L,
- REG_DC_DC_MOD_SEL = 0x80u,
- REG_ADC_EN_1,
- REG_ADC_EN_2,
- REG_ADC_SR_CTRL,
- REG_ADC_IN_RANGE,
- REG_GPIO1_ADC_IRQ_RISING_TH,
- REG_GPIO1_ADC_IRQ_FALLING_TH,
- REG_TIMER_CTRL = 0x8au,
- REG_VBUS_CTRL_MON_SRP,
- REG_OVER_TEMP_SHUTDOWN = 0x8fu,
- REG_GPIO0_FEAT_SET,
- REG_GPIO_OUT_HIGH_SET,
- REG_GPIO1_FEAT_SET,
- REG_GPIO2_FEAT_SET,
- REG_GPIO_SIG_STATE_SET_MON,
- REG_GPIO3_SET,
- REG_COULOMB_CNTR_CTRL = 0xb8u,
- REG_POWER_MEAS_RES,
- NR_REGS
-};
-
-#define AXP209_CHIP_VERSION_ID (0x01)
-#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16)
-#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8)
-
-/* A simple I2C slave which returns values of ID or CNT register. */
-typedef struct AXP209I2CState {
- /*< private >*/
- I2CSlave i2c;
- /*< public >*/
- uint8_t regs[NR_REGS]; /* peripheral registers */
- uint8_t ptr; /* current register index */
- uint8_t count; /* counter used for tx/rx */
-} AXP209I2CState;
-
-/* Reset all counters and load ID register */
-static void axp209_reset_enter(Object *obj, ResetType type)
-{
- AXP209I2CState *s = AXP209(obj);
-
- memset(s->regs, 0, NR_REGS);
- s->ptr = 0;
- s->count = 0;
- s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID;
- s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET;
- s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET;
-}
-
-/* Handle events from master. */
-static int axp209_event(I2CSlave *i2c, enum i2c_event event)
-{
- AXP209I2CState *s = AXP209(i2c);
-
- s->count = 0;
-
- return 0;
-}
-
-/* Called when master requests read */
-static uint8_t axp209_rx(I2CSlave *i2c)
-{
- AXP209I2CState *s = AXP209(i2c);
- uint8_t ret = 0xff;
-
- if (s->ptr < NR_REGS) {
- ret = s->regs[s->ptr++];
- }
-
- trace_axp209_rx(s->ptr - 1, ret);
-
- return ret;
-}
-
-/*
- * Called when master sends write.
- * Update ptr with byte 0, then perform write with second byte.
- */
-static int axp209_tx(I2CSlave *i2c, uint8_t data)
-{
- AXP209I2CState *s = AXP209(i2c);
-
- if (s->count == 0) {
- /* Store register address */
- s->ptr = data;
- s->count++;
- trace_axp209_select(data);
- } else {
- trace_axp209_tx(s->ptr, data);
- if (s->ptr == REG_DC_DC2_OUT_V_CTRL) {
- s->regs[s->ptr++] = data;
- }
- }
-
- return 0;
-}
-
-static const VMStateDescription vmstate_axp209 = {
- .name = TYPE_AXP209_PMU,
- .version_id = 1,
- .fields = (VMStateField[]) {
- VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS),
- VMSTATE_UINT8(count, AXP209I2CState),
- VMSTATE_UINT8(ptr, AXP209I2CState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static void axp209_class_init(ObjectClass *oc, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(oc);
- I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc);
- ResettableClass *rc = RESETTABLE_CLASS(oc);
-
- rc->phases.enter = axp209_reset_enter;
- dc->vmsd = &vmstate_axp209;
- isc->event = axp209_event;
- isc->recv = axp209_rx;
- isc->send = axp209_tx;
-}
-
-static const TypeInfo axp209_info = {
- .name = TYPE_AXP209_PMU,
- .parent = TYPE_I2C_SLAVE,
- .instance_size = sizeof(AXP209I2CState),
- .class_init = axp209_class_init
-};
-
-static void axp209_register_devices(void)
-{
- type_register_static(&axp209_info);
-}
-
-type_init(axp209_register_devices);
diff --git a/hw/misc/axp2xx.c b/hw/misc/axp2xx.c
new file mode 100644
index 0000000000..52a6ffc7f3
--- /dev/null
+++ b/hw/misc/axp2xx.c
@@ -0,0 +1,283 @@
+/*
+ * AXP-2XX PMU Emulation, supported lists:
+ * AXP209
+ * AXP221
+ *
+ * Copyright (C) 2022 Strahinja Jankovic
<strahinja.p.janko...@gmail.com>
+ * Copyright (C) 2023 qianfan Zhao <qianfangui...@163.com>
+ *
+ * Permission is hereby granted, free of charge, to any person
obtaining a
+ * copy of this software and associated documentation files (the
"Software"),
+ * to deal in the Software without restriction, including without
limitation
+ * the rights to use, copy, modify, merge, publish, distribute,
sublicense,
+ * and/or sell copies of the Software, and to permit persons to
whom the
+ * Software is furnished to do so, subject to the following
conditions:
+ *
+ * The above copyright notice and this permission notice shall be
included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "trace.h"
+#include "hw/i2c/i2c.h"
+#include "migration/vmstate.h"
+
+#define TYPE_AXP2XX "axp2xx_pmu"
+#define TYPE_AXP209_PMU "axp209_pmu"
+#define TYPE_AXP221_PMU "axp221_pmu"
+
+OBJECT_DECLARE_TYPE(AXP2xxI2CState, AXP2xxClass, AXP2XX)
+
+#define NR_REGS (0xff)
+
+/* A simple I2C slave which returns values of ID or CNT register. */
+typedef struct AXP2xxI2CState {
+ /*< private >*/
+ I2CSlave i2c;
+ /*< public >*/
+ uint8_t regs[NR_REGS]; /* peripheral registers */
+ uint8_t ptr; /* current register index */
+ uint8_t count; /* counter used for tx/rx */
+} AXP2xxI2CState;
+
+typedef struct AXP2xxClass {
+ /*< private >*/
+ I2CSlaveClass parent_class;
+ /*< public >*/
+ void (*reset_enter)(AXP2xxI2CState *s, ResetType type);
+} AXP2xxClass;
+
+#define AXP209_CHIP_VERSION_ID (0x01)
+#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16)
+
+/* Reset all counters and load ID register */
+static void axp209_reset_enter(AXP2xxI2CState *s, ResetType type)
+{
+ memset(s->regs, 0, NR_REGS);
+ s->ptr = 0;
+ s->count = 0;
+
+ s->regs[0x03] = AXP209_CHIP_VERSION_ID;
+ s->regs[0x23] = AXP209_DC_DC2_OUT_V_CTRL_RESET;
+
+ s->regs[0x30] = 0x60;
+ s->regs[0x32] = 0x46;
+ s->regs[0x34] = 0x41;
+ s->regs[0x35] = 0x22;
+ s->regs[0x36] = 0x5d;
+ s->regs[0x37] = 0x08;
+ s->regs[0x38] = 0xa5;
+ s->regs[0x39] = 0x1f;
+ s->regs[0x3a] = 0x68;
+ s->regs[0x3b] = 0x5f;
+ s->regs[0x3c] = 0xfc;
+ s->regs[0x3d] = 0x16;
+ s->regs[0x40] = 0xd8;
+ s->regs[0x42] = 0xff;
+ s->regs[0x43] = 0x3b;
+ s->regs[0x80] = 0xe0;
+ s->regs[0x82] = 0x83;
+ s->regs[0x83] = 0x80;
+ s->regs[0x84] = 0x32;
+ s->regs[0x86] = 0xff;
+ s->regs[0x90] = 0x07;
+ s->regs[0x91] = 0xa0;
+ s->regs[0x92] = 0x07;
+ s->regs[0x93] = 0x07;
+}
+
+#define AXP221_PWR_STATUS_ACIN_PRESENT BIT(7)
+#define AXP221_PWR_STATUS_ACIN_AVAIL BIT(6)
+#define AXP221_PWR_STATUS_VBUS_PRESENT BIT(5)
+#define AXP221_PWR_STATUS_VBUS_USED BIT(4)
+#define AXP221_PWR_STATUS_BAT_CHARGING BIT(2)
+#define AXP221_PWR_STATUS_ACIN_VBUS_POWERED BIT(1)
+
+/* Reset all counters and load ID register */
+static void axp221_reset_enter(AXP2xxI2CState *s, ResetType type)
+{
+ memset(s->regs, 0, NR_REGS);
+ s->ptr = 0;
+ s->count = 0;
+
+ /* input power status register */
+ s->regs[0x00] = AXP221_PWR_STATUS_ACIN_PRESENT
+ | AXP221_PWR_STATUS_ACIN_AVAIL
+ | AXP221_PWR_STATUS_ACIN_VBUS_POWERED;
+
+ s->regs[0x01] = 0x00; /* no battery is connected */
+
+ /*
+ * CHIPID register, no documented on datasheet, but it is
checked in
+ * u-boot spl. I had read it from AXP221s and got 0x06 value.
+ * So leave 06h here.
+ */
+ s->regs[0x03] = 0x06;
+
+ s->regs[0x10] = 0xbf;
+ s->regs[0x13] = 0x01;
+ s->regs[0x30] = 0x60;
+ s->regs[0x31] = 0x03;
+ s->regs[0x32] = 0x43;
+ s->regs[0x33] = 0xc6;
+ s->regs[0x34] = 0x45;
+ s->regs[0x35] = 0x0e;
+ s->regs[0x36] = 0x5d;
+ s->regs[0x37] = 0x08;
+ s->regs[0x38] = 0xa5;
+ s->regs[0x39] = 0x1f;
+ s->regs[0x3c] = 0xfc;
+ s->regs[0x3d] = 0x16;
+ s->regs[0x80] = 0x80;
+ s->regs[0x82] = 0xe0;
+ s->regs[0x84] = 0x32;
+ s->regs[0x8f] = 0x01;
+
+ s->regs[0x90] = 0x07;
+ s->regs[0x91] = 0x1f;
+ s->regs[0x92] = 0x07;
+ s->regs[0x93] = 0x1f;
+
+ s->regs[0x40] = 0xd8;
+ s->regs[0x41] = 0xff;
+ s->regs[0x42] = 0x03;
+ s->regs[0x43] = 0x03;
+
+ s->regs[0xb8] = 0xc0;
+ s->regs[0xb9] = 0x64;
+ s->regs[0xe6] = 0xa0;
Would it be possible to change this array to be more human readable?
Perhaps using the register names from the datasheet (if available or
some other source) as the names for defines / enums or just as
comments can help.
That way we can know what the contents mean.
+}
+
+static void axp2xx_reset_enter(Object *obj, ResetType type)
+{
+ AXP2xxI2CState *s = AXP2XX(obj);
+ AXP2xxClass *sc = AXP2XX_GET_CLASS(s);
+
+ sc->reset_enter(s, type);
+}
+
+/* Handle events from master. */
+static int axp2xx_event(I2CSlave *i2c, enum i2c_event event)
+{
+ AXP2xxI2CState *s = AXP2XX(i2c);
+
+ s->count = 0;
+
+ return 0;
+}
+
+/* Called when master requests read */
+static uint8_t axp2xx_rx(I2CSlave *i2c)
+{
+ AXP2xxI2CState *s = AXP2XX(i2c);
+ uint8_t ret = 0xff;
+
+ if (s->ptr < NR_REGS) {
+ ret = s->regs[s->ptr++];
+ }
+
+ trace_axp2xx_rx(s->ptr - 1, ret);
+
+ return ret;
+}
+
+/*
+ * Called when master sends write.
+ * Update ptr with byte 0, then perform write with second byte.
+ */
+static int axp2xx_tx(I2CSlave *i2c, uint8_t data)
+{
+ AXP2xxI2CState *s = AXP2XX(i2c);
+
+ if (s->count == 0) {
+ /* Store register address */
+ s->ptr = data;
+ s->count++;
+ trace_axp2xx_select(data);
+ } else {
+ trace_axp2xx_tx(s->ptr, data);
+ s->regs[s->ptr++] = data;
+ }
+
+ return 0;
+}
+
+static const VMStateDescription vmstate_axp2xx = {
+ .name = TYPE_AXP209_PMU,
Should the .name value be TYPE_AXP2xx_PMU instead, since we're
describing the new generic axp2xx here?
+ .version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(regs, AXP2xxI2CState, NR_REGS),
+ VMSTATE_UINT8(count, AXP2xxI2CState),
+ VMSTATE_UINT8(ptr, AXP2xxI2CState),
In the 'struct AXPxxI2CState' definition above, the order of
definition is: regs, ptr, count. For consistency, ptr and count should
then be swapped here to match.
+ VMSTATE_END_OF_LIST()
Another question that comes to my mind here: is it allowed by the
migration API to have a new axp2xx device
show up while the previous axp209 disappears? (in case for the
allwinner A10 cubieboard).
My expectation with this code would be that during such a migration,
any current state of the axp209 device would be lost
and a new fresh device would show up to the guest.
I don't know enough about the migration support to tell if this is OK
or not.
If another reviewer could help clarify, that would be great.
+ }
+};
+
+static void axp2xx_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc);
+ ResettableClass *rc = RESETTABLE_CLASS(oc);
+
+ rc->phases.enter = axp2xx_reset_enter;
+ dc->vmsd = &vmstate_axp2xx;
+ isc->event = axp2xx_event;
+ isc->recv = axp2xx_rx;
+ isc->send = axp2xx_tx;
+}
+
+static const TypeInfo axp2xx_info = {
+ .name = TYPE_AXP2XX,
+ .parent = TYPE_I2C_SLAVE,
+ .instance_size = sizeof(AXP2xxI2CState),
+ .class_size = sizeof(AXP2xxClass),
+ .class_init = axp2xx_class_init,
+ .abstract = true,
+};
+
+static void axp209_class_init(ObjectClass *oc, void *data)
+{
+ AXP2xxClass *sc = AXP2XX_CLASS(oc);
+
+ sc->reset_enter = axp209_reset_enter;
+}
+
+static const TypeInfo axp209_info = {
+ .name = TYPE_AXP209_PMU,
+ .parent = TYPE_AXP2XX,
+ .class_init = axp209_class_init
+};
+
+static void axp221_class_init(ObjectClass *oc, void *data)
+{
+ AXP2xxClass *sc = AXP2XX_CLASS(oc);
+
+ sc->reset_enter = axp221_reset_enter;
+}
+
+static const TypeInfo axp221_info = {
+ .name = TYPE_AXP221_PMU,
+ .parent = TYPE_AXP2XX,
+ .class_init = axp221_class_init,
+};
+
+static void axp2xx_register_devices(void)
+{
+ type_register_static(&axp2xx_info);
+ type_register_static(&axp209_info);
+ type_register_static(&axp221_info);
+}
+
+type_init(axp2xx_register_devices);
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 96e35f1cdb..1db0343333 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -45,7 +45,7 @@ softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3',
if_true: files('allwinner-h3-dramc.c
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true:
files('allwinner-h3-sysctrl.c'))
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true:
files('allwinner-sid.c'))
softmmu_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true:
files('allwinner-r40-ccu.c'))
-softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c'))
+softmmu_ss.add(when: 'CONFIG_AXP2XX_PMU', if_true: files('axp2xx.c'))
softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true:
files('arm_sysctl.c'))
softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c'))
softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true:
files('eccmemctl.c'))
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index c47876a902..24cdec83fe 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -23,10 +23,10 @@ allwinner_sid_write(uint64_t offset, uint64_t
data, unsigned size) "offset 0x%"
avr_power_read(uint8_t value) "power_reduc read value:%u"
avr_power_write(uint8_t value) "power_reduc write value:%u"
-# axp209.c
-axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " :
0x%" PRIx8
-axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8
-axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " :
0x%" PRIx8
+# axp2xx
+axp2xx_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " :
0x%" PRIx8
+axp2xx_select(uint8_t reg) "Accessing reg 0x%" PRIx8
+axp2xx_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " :
0x%" PRIx8
# eccmemctl.c
ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x"
--
2.25.1
--
Niek Linnenbank
