> On May 4, 2022, at 9:34 AM, Peter Delevoryas <p...@fb.com> wrote:
>
>>
>> On May 4, 2022, at 12:39 AM, Cédric Le Goater <c...@kaod.org> wrote:
>>
>> On 5/4/22 00:59, Peter Delevoryas wrote:
>>> Add the 'fby35-bmc' machine type based on the kernel DTS[1] and userspace
>>> i2c setup scripts[2]. Undefined values are inherited from the AST2600-EVB.
>>> Reference images can be found in Facebook OpenBMC Github Release assets
>>> as "fby35.mtd". [3]
>>> You can boot the reference images as follows (fby35 uses dual-flash):
>>> qemu-system-arm -machine fby35-bmc \
>>> -drive file=fby35.mtd,format=raw,if=mtd \
>>> -drive file=fby35.mtd,format=raw,if=mtd \
>>> -nographic
>>> [1]
>>> https://github.com/facebook/openbmc-linux/blob/412d5053258007117e94b1e36015aefc1301474b/arch/arm/boot/dts/aspeed-bmc-facebook-fby35.dts
>>> [2]
>>> https://github.com/facebook/openbmc/blob/e2294ff5d31dd65c248fe396a385286d6d5c463d/meta-facebook/meta-fby35/recipes-fby35/plat-utils/files/setup-dev.sh
>>> [3] https://github.com/facebook/openbmc/releases
>>> Signed-off-by: Peter Delevoryas <p...@fb.com>
>>
>> Reviewed-by: Cédric Le Goater <c...@kaod.org>
>
> Thanks!
>
>>
>> a question below,
>>
>>> ---
>>> v2: Removed avocado test, updated commit message.
>>> hw/arm/aspeed.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 63 insertions(+)
>>> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
>>> index a74c13ab0f..725c169488 100644
>>> --- a/hw/arm/aspeed.c
>>> +++ b/hw/arm/aspeed.c
>>> @@ -21,6 +21,7 @@
>>> #include "hw/misc/led.h"
>>> #include "hw/qdev-properties.h"
>>> #include "sysemu/block-backend.h"
>>> +#include "sysemu/reset.h"
>>> #include "hw/loader.h"
>>> #include "qemu/error-report.h"
>>> #include "qemu/units.h"
>>> @@ -951,6 +952,35 @@ static void bletchley_bmc_i2c_init(AspeedMachineState
>>> *bmc)
>>> i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67);
>>> }
>>> +static void fby35_i2c_init(AspeedMachineState *bmc)
>>> +{
>>> + AspeedSoCState *soc = &bmc->soc;
>>> + I2CBus *i2c[16];
>>> +
>>> + for (int i = 0; i < 16; i++) {
>>> + i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
>>> + }
>>> +
>>> + i2c_slave_create_simple(i2c[2], TYPE_LM75, 0x4f);
>>> + i2c_slave_create_simple(i2c[8], TYPE_TMP421, 0x1f);
>>> + /* Hotswap controller is actually supposed to be mp5920 or ltc4282. */
>>> + i2c_slave_create_simple(i2c[11], "adm1272", 0x44);
>>> + i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4e);
>>> + i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4f);
>>> +
>>> + aspeed_eeprom_init(i2c[4], 0x51, 128 * KiB);
>>> + aspeed_eeprom_init(i2c[6], 0x51, 128 * KiB);
>>> + aspeed_eeprom_init(i2c[8], 0x50, 32 * KiB);
>>> + aspeed_eeprom_init(i2c[11], 0x51, 128 * KiB);
>>> + aspeed_eeprom_init(i2c[11], 0x54, 128 * KiB);
>>> +
>>> + /*
>>> + * TODO: There is a multi-master i2c connection to an AST1030 MiniBMC on
>>> + * buses 0, 1, 2, 3, and 9. Source address 0x10, target address 0x20 on
>>> + * each.
>>> + */
>>
>>
>> Have you considered extending the emulation to include a AST1030 SoC
>> in a larger machine ?
>>
>> The AST1030 SoC is merged and I think that QEMU could run a cortex-m4
>> CPU and a A7 CPU. A + R CPUs is supported (Xilinx boards).
>>
>
> As a matter of fact yes! I tested booting our OpenBIC Zephyr kernel last week
> with the 1030, that worked. I also used the experimental i2c multi-master
> patches from Klaus to make a i2c-netdev device that connects two separate
> QEMU instances through a socket and sends their i2c messages back and forth.
> I was able to test a basic MCTP transaction.
>
> I’m hoping to help however possible with merging Klaus’s changes, and then
> propose the i2c-netdev thing too.
Oh wait a minute: You mean I could include both SoC’s in one machine? Oh that’s
a good idea actually. Maybe I’ll look into that as an alternative to the socket
thing. Still, it might be something useful to submit anyways.
>
>> Thanks,
>>
>> C.
>>
>>
>>> +}
>>> +
>>> static bool aspeed_get_mmio_exec(Object *obj, Error **errp)
>>> {
>>> return ASPEED_MACHINE(obj)->mmio_exec;
>>> @@ -1293,6 +1323,35 @@ static void
>>> aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data)
>>> aspeed_soc_num_cpus(amc->soc_name);
>>> }
>>> +static void fby35_reset(MachineState *state)
>>> +{
>>> + AspeedMachineState *bmc = ASPEED_MACHINE(state);
>>> + AspeedGPIOState *gpio = &bmc->soc.gpio;
>>> +
>>> + qemu_devices_reset();
>>> +
>>> + /* Board ID */
>>> + object_property_set_bool(OBJECT(gpio), "gpioV4", true, &error_fatal);
>>> + object_property_set_bool(OBJECT(gpio), "gpioV5", true, &error_fatal);
>>> + object_property_set_bool(OBJECT(gpio), "gpioV6", true, &error_fatal);
>>> + object_property_set_bool(OBJECT(gpio), "gpioV7", false, &error_fatal);
>>> +}
>>> +
>>> +static void aspeed_machine_fby35_class_init(ObjectClass *oc, void *data)
>>> +{
>>> + MachineClass *mc = MACHINE_CLASS(oc);
>>> + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
>>> +
>>> + mc->desc = "Facebook fby35 BMC (Cortex-A7)";
>>> + mc->reset = fby35_reset;
>>> + amc->fmc_model = "mx66l1g45g";
>>> + amc->num_cs = 2;
>>> + amc->macs_mask = ASPEED_MAC3_ON;
>>> + amc->i2c_init = fby35_i2c_init;
>>> + /* FIXME: Replace this macro with something more general */
>>> + mc->default_ram_size = FUJI_BMC_RAM_SIZE;
>>> +}
>>> +
>>> #define AST1030_INTERNAL_FLASH_SIZE (1024 * 1024)
>>> /* Main SYSCLK frequency in Hz (200MHz) */
>>> #define SYSCLK_FRQ 200000000ULL
>>> @@ -1411,6 +1470,10 @@ static const TypeInfo aspeed_machine_types[] = {
>>> .name = MACHINE_TYPE_NAME("bletchley-bmc"),
>>> .parent = TYPE_ASPEED_MACHINE,
>>> .class_init = aspeed_machine_bletchley_class_init,
>>> + }, {
>>> + .name = MACHINE_TYPE_NAME("fby35-bmc"),
>>> + .parent = MACHINE_TYPE_NAME("ast2600-evb"),
>>> + .class_init = aspeed_machine_fby35_class_init,
>>> }, {
>>> .name = MACHINE_TYPE_NAME("ast1030-evb"),
>>> .parent = TYPE_ASPEED_MACHINE,
