On 9/1/20 3:39 AM, Bin Meng wrote:
> From: Bin Meng <bin.m...@windriver.com>
>
> Microchip PolarFire SoC integrates one Cadence SDHCI controller.
> On the Icicle Kit board, one eMMC chip and an external SD card
> connect to this controller depending on different configuration.
>
> As QEMU does not support eMMC yet, we just emulate the SD card
> configuration. To test this, the Hart Software Services (HSS)
> should choose the SD card configuration:
>
> $ cp boards/icicle-kit-es/def_config.sdcard .config
> $ make BOARD=icicle-kit-es
>
> The SD card image can be built from the Yocto BSP at:
> https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp
>
> Note the generated SD card image should be resized before use:
> $ qemu-img resize /path/to/sdcard.img 4G
>
> Launch QEMU with the following command:
> $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img
>
> Signed-off-by: Bin Meng <bin.m...@windriver.com>
>
> ---
>
> (no changes since v2)
>
> Changes in v2:
> - do not initialize TYPE_SYSBUS_SDHCI in the SoC instance_init(),
> instead move that to the cadence_sdhci model
> - do not access generic-sdhci's state directly,
> instead move that to the cadence_sdhci model
>
> include/hw/riscv/microchip_pfsoc.h | 4 ++++
> hw/riscv/microchip_pfsoc.c | 23 +++++++++++++++++++++++
> hw/riscv/Kconfig | 1 +
> 3 files changed, 28 insertions(+)
>
> diff --git a/include/hw/riscv/microchip_pfsoc.h
> b/include/hw/riscv/microchip_pfsoc.h
> index a5efa1d..d810ee8 100644
> --- a/include/hw/riscv/microchip_pfsoc.h
> +++ b/include/hw/riscv/microchip_pfsoc.h
> @@ -23,6 +23,7 @@
> #define HW_MICROCHIP_PFSOC_H
>
> #include "hw/char/mchp_pfsoc_mmuart.h"
> +#include "hw/sd/cadence_sdhci.h"
>
> typedef struct MicrochipPFSoCState {
> /*< private >*/
> @@ -39,6 +40,7 @@ typedef struct MicrochipPFSoCState {
> MchpPfSoCMMUartState *serial2;
> MchpPfSoCMMUartState *serial3;
> MchpPfSoCMMUartState *serial4;
> + CadenceSDHCIState sdhci;
> } MicrochipPFSoCState;
>
> #define TYPE_MICROCHIP_PFSOC "microchip.pfsoc"
> @@ -74,6 +76,7 @@ enum {
> MICROCHIP_PFSOC_MMUART0,
> MICROCHIP_PFSOC_SYSREG,
> MICROCHIP_PFSOC_MPUCFG,
> + MICROCHIP_PFSOC_EMMC_SD,
> MICROCHIP_PFSOC_MMUART1,
> MICROCHIP_PFSOC_MMUART2,
> MICROCHIP_PFSOC_MMUART3,
> @@ -85,6 +88,7 @@ enum {
> };
>
> enum {
> + MICROCHIP_PFSOC_EMMC_SD_IRQ = 88,
> MICROCHIP_PFSOC_MMUART0_IRQ = 90,
> MICROCHIP_PFSOC_MMUART1_IRQ = 91,
> MICROCHIP_PFSOC_MMUART2_IRQ = 92,
> diff --git a/hw/riscv/microchip_pfsoc.c b/hw/riscv/microchip_pfsoc.c
> index cee959a..0b2e9ca 100644
> --- a/hw/riscv/microchip_pfsoc.c
> +++ b/hw/riscv/microchip_pfsoc.c
> @@ -12,6 +12,7 @@
> * 1) PLIC (Platform Level Interrupt Controller)
> * 2) eNVM (Embedded Non-Volatile Memory)
> * 3) MMUARTs (Multi-Mode UART)
> + * 4) Cadence eMMC/SDHC controller and an SD card connected to it
> *
> * This board currently generates devicetree dynamically that indicates at
> least
> * two harts and up to five harts.
> @@ -75,6 +76,7 @@ static const struct MemmapEntry {
> [MICROCHIP_PFSOC_MMUART0] = { 0x20000000, 0x1000 },
> [MICROCHIP_PFSOC_SYSREG] = { 0x20002000, 0x2000 },
> [MICROCHIP_PFSOC_MPUCFG] = { 0x20005000, 0x1000 },
> + [MICROCHIP_PFSOC_EMMC_SD] = { 0x20008000, 0x1000 },
> [MICROCHIP_PFSOC_MMUART1] = { 0x20100000, 0x1000 },
> [MICROCHIP_PFSOC_MMUART2] = { 0x20102000, 0x1000 },
> [MICROCHIP_PFSOC_MMUART3] = { 0x20104000, 0x1000 },
> @@ -111,6 +113,9 @@ static void microchip_pfsoc_soc_instance_init(Object *obj)
> qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type",
> TYPE_RISCV_CPU_SIFIVE_U54);
> qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", RESET_VECTOR);
> +
> + object_initialize_child(obj, "sd-controller", &s->sdhci,
> + TYPE_CADENCE_SDHCI);
> }
>
> static void microchip_pfsoc_soc_realize(DeviceState *dev, Error **errp)
> @@ -223,6 +228,13 @@ static void microchip_pfsoc_soc_realize(DeviceState
> *dev, Error **errp)
> memmap[MICROCHIP_PFSOC_MPUCFG].base,
> memmap[MICROCHIP_PFSOC_MPUCFG].size);
>
> + /* SDHCI */
> + sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp);
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0,
> + memmap[MICROCHIP_PFSOC_EMMC_SD].base);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
> + qdev_get_gpio_in(DEVICE(s->plic), MICROCHIP_PFSOC_EMMC_SD_IRQ));
> +
> /* MMUARTs */
> s->serial0 = mchp_pfsoc_mmuart_create(system_memory,
> memmap[MICROCHIP_PFSOC_MMUART0].base,
> @@ -290,6 +302,7 @@ static void
> microchip_icicle_kit_machine_init(MachineState *machine)
> MicrochipIcicleKitState *s = MICROCHIP_ICICLE_KIT_MACHINE(machine);
> MemoryRegion *system_memory = get_system_memory();
> MemoryRegion *main_mem = g_new(MemoryRegion, 1);
> + DriveInfo *dinfo = drive_get_next(IF_SD);
Ideally this part should be in the machine, not the soc.
Maybe you can alias the "drive" property as "sd-drive" in the soc,
and move the card attach to the machine?
Can be done later if you prefer:
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
>
> /* Sanity check on RAM size */
> if (machine->ram_size < mc->default_ram_size) {
> @@ -312,6 +325,16 @@ static void
> microchip_icicle_kit_machine_init(MachineState *machine)
>
> /* Load the firmware */
> riscv_find_and_load_firmware(machine, BIOS_FILENAME, RESET_VECTOR, NULL);
> +
> + /* Attach an SD card */
> + if (dinfo) {
> + CadenceSDHCIState *sdhci = &(s->soc.sdhci);
> + DeviceState *card = qdev_new(TYPE_SD_CARD);
> +
> + qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo),
> + &error_fatal);
> + qdev_realize_and_unref(card, sdhci->bus, &error_fatal);
> + }
> }
>
> static void microchip_icicle_kit_machine_class_init(ObjectClass *oc, void
> *data)
> diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
> index ceb7c16..7412db9 100644
> --- a/hw/riscv/Kconfig
> +++ b/hw/riscv/Kconfig
> @@ -55,3 +55,4 @@ config MICROCHIP_PFSOC
> select SIFIVE
> select UNIMP
> select MCHP_PFSOC_MMUART
> + select CADENCE_SDHCI
>
