Hi Jason,
Thanks for reviewing it. Few comments inline.
Also, I will add a patch for Maintainer updates when I send v2.
Regards,
Vikram
> -----Original Message-----
> From: Jason Wang <jasow...@redhat.com>
> Sent: Tuesday, February 4, 2020 9:47 PM
> To: Vikram Garhwal <f...@xilinx.com>; qemu-devel@nongnu.org
> Subject: Re: [PATCH 1/1] hw/net/can: Introduce Xlnx ZynqMP CAN controller
> for QEMU
>
>
> On 2020/2/4 上午5:06, Vikram Garhwal wrote:
> > XlnxCAN is developed based on SocketCAN, QEMU CAN bus implementation.
> > Bus connection and socketCAN connection for each CAN module can be set
> > through command lines.
> >
> > Signed-off-by: Vikram Garhwal <fnu.vik...@xilinx.com>
> > ---
> > hw/net/can/Makefile.objs | 1 +
> > hw/net/can/xlnx-zynqmp-can.c | 1106
> ++++++++++++++++++++++++++++++++++++++
> > include/hw/net/xlnx-zynqmp-can.h | 77 +++
> > 3 files changed, 1184 insertions(+)
> > create mode 100644 hw/net/can/xlnx-zynqmp-can.c
> > create mode 100644 include/hw/net/xlnx-zynqmp-can.h
> >
> > diff --git a/hw/net/can/Makefile.objs b/hw/net/can/Makefile.objs index
> > 9f0c4ee..0fe87dd 100644
> > --- a/hw/net/can/Makefile.objs
> > +++ b/hw/net/can/Makefile.objs
> > @@ -2,3 +2,4 @@ common-obj-$(CONFIG_CAN_SJA1000) +=
> can_sja1000.o
> > common-obj-$(CONFIG_CAN_PCI) += can_kvaser_pci.o
> > common-obj-$(CONFIG_CAN_PCI) += can_pcm3680_pci.o
> > common-obj-$(CONFIG_CAN_PCI) += can_mioe3680_pci.o
> > +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-can.o
> > diff --git a/hw/net/can/xlnx-zynqmp-can.c
> > b/hw/net/can/xlnx-zynqmp-can.c new file mode 100644 index
> > 0000000..e14013c
> > --- /dev/null
> > +++ b/hw/net/can/xlnx-zynqmp-can.c
> > @@ -0,0 +1,1106 @@
> > +/*
> > + * QEMU model of the Xilinx CAN device.
> > + *
> > + * Copyright (c) 2019 Xilinx Inc.
>
>
> 2020?
[Vikram Garhwal] Yeah. I will change it 2020 in V2 patch.
>
>
> > + * Partially autogenerated by xregqemu.py
>
>
> What did xregqemu.py do? Is it possible to integrate it into qemu source then
> we can review high level language other than c?
[Vikram Garhwal] I guess it's better to remove it as it is creating confusion.
It was basically a tool(Internal use) which generate register defs.
>
>
> > 2019-06-20.
> > + *
> > + * Written-by: Vikram Garhwal<fnu.vik...@xilinx.com>
> > + *
> > + * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz
> Eren and
> > + * Pavel Pisa
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> > + * of this software and associated documentation files (the "Software"), to
> deal
> > + * in the Software without restriction, including without limitation the
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included
> in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> ARISING FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> DEALINGS IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/sysbus.h"
> > +#include "hw/register.h"
> > +#include "hw/irq.h"
> > +#include "qapi/error.h"
> > +#include "qemu/bitops.h"
> > +#include "qemu/log.h"
> > +#include "qemu/cutils.h"
> > +#include "sysemu/sysemu.h"
> > +#include "migration/vmstate.h"
> > +#include "hw/qdev-properties.h"
> > +#include "net/can_emu.h"
> > +#include "net/can_host.h"
> > +#include "qemu/event_notifier.h"
> > +#include "qom/object_interfaces.h"
> > +#include "hw/net/xlnx-zynqmp-can.h"
> > +
> > +#ifndef XLNX_ZYNQMP_CAN_ERR_DEBUG
> > +#define XLNX_ZYNQMP_CAN_ERR_DEBUG 0
> > +#endif
> > +
> > +#define DB_PRINT(...) do { \
> > + if (XLNX_ZYNQMP_CAN_ERR_DEBUG) { \
> > + qemu_log(__VA_ARGS__); \
> > + } \
> > +} while (0)
> > +
> > +#define MAX_DLC 8
> > +#undef ERROR
> > +
> > +REG32(SOFTWARE_RESET_REGISTER, 0x0)
> > + FIELD(SOFTWARE_RESET_REGISTER, CEN, 1, 1)
> > + FIELD(SOFTWARE_RESET_REGISTER, SRST, 0, 1)
> > +REG32(MODE_SELECT_REGISTER, 0x4)
> > + FIELD(MODE_SELECT_REGISTER, SNOOP, 2, 1)
> > + FIELD(MODE_SELECT_REGISTER, LBACK, 1, 1)
> > + FIELD(MODE_SELECT_REGISTER, SLEEP, 0, 1)
> > +REG32(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, 0x8)
> > + FIELD(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, BRP, 0,
> 8)
> > +REG32(ARBITRATION_PHASE_BIT_TIMING_REGISTER, 0xc)
> > + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, SJW, 7, 2)
> > + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS2, 4, 3)
> > + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS1, 0, 4)
> > +REG32(ERROR_COUNTER_REGISTER, 0x10)
> > + FIELD(ERROR_COUNTER_REGISTER, REC, 8, 8)
> > + FIELD(ERROR_COUNTER_REGISTER, TEC, 0, 8)
> > +REG32(ERROR_STATUS_REGISTER, 0x14)
> > + FIELD(ERROR_STATUS_REGISTER, ACKER, 4, 1)
> > + FIELD(ERROR_STATUS_REGISTER, BERR, 3, 1)
> > + FIELD(ERROR_STATUS_REGISTER, STER, 2, 1)
> > + FIELD(ERROR_STATUS_REGISTER, FMER, 1, 1)
> > + FIELD(ERROR_STATUS_REGISTER, CRCER, 0, 1)
> > +REG32(STATUS_REGISTER, 0x18)
> > + FIELD(STATUS_REGISTER, SNOOP, 12, 1)
> > + FIELD(STATUS_REGISTER, ACFBSY, 11, 1)
> > + FIELD(STATUS_REGISTER, TXFLL, 10, 1)
> > + FIELD(STATUS_REGISTER, TXBFLL, 9, 1)
> > + FIELD(STATUS_REGISTER, ESTAT, 7, 2)
> > + FIELD(STATUS_REGISTER, ERRWRN, 6, 1)
> > + FIELD(STATUS_REGISTER, BBSY, 5, 1)
> > + FIELD(STATUS_REGISTER, BIDLE, 4, 1)
> > + FIELD(STATUS_REGISTER, NORMAL, 3, 1)
> > + FIELD(STATUS_REGISTER, SLEEP, 2, 1)
> > + FIELD(STATUS_REGISTER, LBACK, 1, 1)
> > + FIELD(STATUS_REGISTER, CONFIG, 0, 1)
> > +REG32(INTERRUPT_STATUS_REGISTER, 0x1c)
> > + FIELD(INTERRUPT_STATUS_REGISTER, TXFEMP, 14, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, TXFWMEMP, 13, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, RXFWMFLL, 12, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, WKUP, 11, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, SLP, 10, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, BSOFF, 9, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, ERROR, 8, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, RXNEMP, 7, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, RXOFLW, 6, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, RXUFLW, 5, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, RXOK, 4, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, TXBFLL, 3, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, TXFLL, 2, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, TXOK, 1, 1)
> > + FIELD(INTERRUPT_STATUS_REGISTER, ARBLST, 0, 1)
> > +REG32(INTERRUPT_ENABLE_REGISTER, 0x20)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFEMP, 14, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFWMEMP, 13, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXFWMFLL, 12, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, EWKUP, 11, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ESLP, 10, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, EBSOFF, 9, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, EERROR, 8, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXNEMP, 7, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOFLW, 6, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXUFLW, 5, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOK, 4, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXBFLL, 3, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFLL, 2, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXOK, 1, 1)
> > + FIELD(INTERRUPT_ENABLE_REGISTER, EARBLST, 0, 1)
> > +REG32(INTERRUPT_CLEAR_REGISTER, 0x24)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFEMP, 14, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFWMEMP, 13, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXFWMFLL, 12, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CWKUP, 11, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CSLP, 10, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CBSOFF, 9, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CERROR, 8, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXNEMP, 7, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOFLW, 6, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXUFLW, 5, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOK, 4, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXBFLL, 3, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFLL, 2, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXOK, 1, 1)
> > + FIELD(INTERRUPT_CLEAR_REGISTER, CARBLST, 0, 1)
> > +REG32(TIMESTAMP_REGISTER, 0x28)
> > + FIELD(TIMESTAMP_REGISTER, CTS, 0, 1)
> > +REG32(WIR, 0x2c)
> > + FIELD(WIR, EW, 8, 8)
> > + FIELD(WIR, FW, 0, 8)
> > +REG32(TXFIFO_ID, 0x30)
> > + FIELD(TXFIFO_ID, IDH, 21, 11)
> > + FIELD(TXFIFO_ID, SRRRTR, 20, 1)
> > + FIELD(TXFIFO_ID, IDE, 19, 1)
> > + FIELD(TXFIFO_ID, IDL, 1, 18)
> > + FIELD(TXFIFO_ID, RTR, 0, 1)
> > +REG32(TXFIFO_DLC, 0x34)
> > + FIELD(TXFIFO_DLC, DLC, 28, 4)
> > +REG32(TXFIFO_DATA1, 0x38)
> > + FIELD(TXFIFO_DATA1, DB0, 24, 8)
> > + FIELD(TXFIFO_DATA1, DB1, 16, 8)
> > + FIELD(TXFIFO_DATA1, DB2, 8, 8)
> > + FIELD(TXFIFO_DATA1, DB3, 0, 8)
> > +REG32(TXFIFO_DATA2, 0x3c)
> > + FIELD(TXFIFO_DATA2, DB4, 24, 8)
> > + FIELD(TXFIFO_DATA2, DB5, 16, 8)
> > + FIELD(TXFIFO_DATA2, DB6, 8, 8)
> > + FIELD(TXFIFO_DATA2, DB7, 0, 8)
> > +REG32(TXHPB_ID, 0x40)
> > + FIELD(TXHPB_ID, IDH, 21, 11)
> > + FIELD(TXHPB_ID, SRRRTR, 20, 1)
> > + FIELD(TXHPB_ID, IDE, 19, 1)
> > + FIELD(TXHPB_ID, IDL, 1, 18)
> > + FIELD(TXHPB_ID, RTR, 0, 1)
> > +REG32(TXHPB_DLC, 0x44)
> > + FIELD(TXHPB_DLC, DLC, 28, 4)
> > +REG32(TXHPB_DATA1, 0x48)
> > + FIELD(TXHPB_DATA1, DB0, 24, 8)
> > + FIELD(TXHPB_DATA1, DB1, 16, 8)
> > + FIELD(TXHPB_DATA1, DB2, 8, 8)
> > + FIELD(TXHPB_DATA1, DB3, 0, 8)
> > +REG32(TXHPB_DATA2, 0x4c)
> > + FIELD(TXHPB_DATA2, DB4, 24, 8)
> > + FIELD(TXHPB_DATA2, DB5, 16, 8)
> > + FIELD(TXHPB_DATA2, DB6, 8, 8)
> > + FIELD(TXHPB_DATA2, DB7, 0, 8)
> > +REG32(RXFIFO_ID, 0x50)
> > + FIELD(RXFIFO_ID, IDH, 21, 11)
> > + FIELD(RXFIFO_ID, SRRRTR, 20, 1)
> > + FIELD(RXFIFO_ID, IDE, 19, 1)
> > + FIELD(RXFIFO_ID, IDL, 1, 18)
> > + FIELD(RXFIFO_ID, RTR, 0, 1)
> > +REG32(RXFIFO_DLC, 0x54)
> > + FIELD(RXFIFO_DLC, DLC, 28, 4)
> > + FIELD(RXFIFO_DLC, RXT, 0, 16)
> > +REG32(RXFIFO_DATA1, 0x58)
> > + FIELD(RXFIFO_DATA1, DB0, 24, 8)
> > + FIELD(RXFIFO_DATA1, DB1, 16, 8)
> > + FIELD(RXFIFO_DATA1, DB2, 8, 8)
> > + FIELD(RXFIFO_DATA1, DB3, 0, 8)
> > +REG32(RXFIFO_DATA2, 0x5c)
> > + FIELD(RXFIFO_DATA2, DB4, 24, 8)
> > + FIELD(RXFIFO_DATA2, DB5, 16, 8)
> > + FIELD(RXFIFO_DATA2, DB6, 8, 8)
> > + FIELD(RXFIFO_DATA2, DB7, 0, 8)
> > +REG32(AFR, 0x60)
> > + FIELD(AFR, UAF4, 3, 1)
> > + FIELD(AFR, UAF3, 2, 1)
> > + FIELD(AFR, UAF2, 1, 1)
> > + FIELD(AFR, UAF1, 0, 1)
> > +REG32(AFMR1, 0x64)
> > + FIELD(AFMR1, AMIDH, 21, 11)
> > + FIELD(AFMR1, AMSRR, 20, 1)
> > + FIELD(AFMR1, AMIDE, 19, 1)
> > + FIELD(AFMR1, AMIDL, 1, 18)
> > + FIELD(AFMR1, AMRTR, 0, 1)
> > +REG32(AFIR1, 0x68)
> > + FIELD(AFIR1, AIIDH, 21, 11)
> > + FIELD(AFIR1, AISRR, 20, 1)
> > + FIELD(AFIR1, AIIDE, 19, 1)
> > + FIELD(AFIR1, AIIDL, 1, 18)
> > + FIELD(AFIR1, AIRTR, 0, 1)
> > +REG32(AFMR2, 0x6c)
> > + FIELD(AFMR2, AMIDH, 21, 11)
> > + FIELD(AFMR2, AMSRR, 20, 1)
> > + FIELD(AFMR2, AMIDE, 19, 1)
> > + FIELD(AFMR2, AMIDL, 1, 18)
> > + FIELD(AFMR2, AMRTR, 0, 1)
> > +REG32(AFIR2, 0x70)
> > + FIELD(AFIR2, AIIDH, 21, 11)
> > + FIELD(AFIR2, AISRR, 20, 1)
> > + FIELD(AFIR2, AIIDE, 19, 1)
> > + FIELD(AFIR2, AIIDL, 1, 18)
> > + FIELD(AFIR2, AIRTR, 0, 1)
> > +REG32(AFMR3, 0x74)
> > + FIELD(AFMR3, AMIDH, 21, 11)
> > + FIELD(AFMR3, AMSRR, 20, 1)
> > + FIELD(AFMR3, AMIDE, 19, 1)
> > + FIELD(AFMR3, AMIDL, 1, 18)
> > + FIELD(AFMR3, AMRTR, 0, 1)
> > +REG32(AFIR3, 0x78)
> > + FIELD(AFIR3, AIIDH, 21, 11)
> > + FIELD(AFIR3, AISRR, 20, 1)
> > + FIELD(AFIR3, AIIDE, 19, 1)
> > + FIELD(AFIR3, AIIDL, 1, 18)
> > + FIELD(AFIR3, AIRTR, 0, 1)
> > +REG32(AFMR4, 0x7c)
> > + FIELD(AFMR4, AMIDH, 21, 11)
> > + FIELD(AFMR4, AMSRR, 20, 1)
> > + FIELD(AFMR4, AMIDE, 19, 1)
> > + FIELD(AFMR4, AMIDL, 1, 18)
> > + FIELD(AFMR4, AMRTR, 0, 1)
> > +REG32(AFIR4, 0x80)
> > + FIELD(AFIR4, AIIDH, 21, 11)
> > + FIELD(AFIR4, AISRR, 20, 1)
> > + FIELD(AFIR4, AIIDE, 19, 1)
> > + FIELD(AFIR4, AIIDL, 1, 18)
> > + FIELD(AFIR4, AIRTR, 0, 1)
> > +
> > +static void can_update_irq(XlnxZynqMPCAN *s)
> > +{
> > + unsigned int irq;
> > +
> > + /* Watermark register interrupts. */
> > + if ((fifo32_num_free(&s->tx_fifo) / CAN_FRAME_SIZE) >
> > + ARRAY_FIELD_EX32(s->regs, WIR, EW)) {
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> TXFWMEMP, 1);
> > + }
> > +
> > + if ((fifo32_num_used(&s->rx_fifo) / CAN_FRAME_SIZE) >
> > + ARRAY_FIELD_EX32(s->regs, WIR, FW)) {
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> RXFWMFLL, 1);
> > + }
> > +
> > + /* RX Interrupts. */
> > + if (fifo32_num_used(&s->rx_fifo) >= CAN_FRAME_SIZE) {
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXNEMP,
> 1);
> > + }
> > +
> > + /* TX interrupts. */
> > + if (fifo32_is_empty(&s->tx_fifo)) {
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFEMP,
> 1);
> > + }
> > +
> > + if (fifo32_is_full(&s->tx_fifo)) {
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFLL, 1);
> > + }
> > +
> > + if (fifo32_is_full(&s->txhpb_fifo)) {
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXBFLL,
> 1);
> > + }
> > +
> > + irq = s->regs[R_INTERRUPT_STATUS_REGISTER];
> > + irq &= s->regs[R_INTERRUPT_ENABLE_REGISTER];
> > +
> > + qemu_set_irq(s->irq, irq);
> > +}
> > +
> > +static void can_ier_post_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > +
> > + can_update_irq(s);
> > +}
> > +
> > +static uint64_t can_icr_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > +
> > + s->regs[R_INTERRUPT_STATUS_REGISTER] &= ~val;
> > + can_update_irq(s);
> > +
> > + return 0;
> > +}
> > +
> > +static void can_config_reset(XlnxZynqMPCAN *s)
> > +{
> > + /* Reset all the configuration registers. */
> > + register_reset(&s->reg_info[R_SOFTWARE_RESET_REGISTER]);
> > + register_reset(&s->reg_info[R_MODE_SELECT_REGISTER]);
> > + register_reset(
> > + &s-
> >reg_info[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]);
> > + register_reset(&s-
> >reg_info[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]);
> > + register_reset(&s->reg_info[R_STATUS_REGISTER]);
> > + register_reset(&s->reg_info[R_INTERRUPT_STATUS_REGISTER]);
> > + register_reset(&s->reg_info[R_INTERRUPT_ENABLE_REGISTER]);
> > + register_reset(&s->reg_info[R_INTERRUPT_CLEAR_REGISTER]);
> > + register_reset(&s->reg_info[R_WIR]);
> > +}
> > +
> > +static void can_config_mode(XlnxZynqMPCAN *s)
> > +{
> > + register_reset(&s->reg_info[R_ERROR_COUNTER_REGISTER]);
> > + register_reset(&s->reg_info[R_ERROR_STATUS_REGISTER]);
> > +
> > + /* Put XlnxZynqMPCAN in configuration mode. */
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 1);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, BSOFF, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ERROR, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 0);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ARBLST, 0);
> > +
> > + can_update_irq(s);
> > +}
> > +
> > +static void update_status_register_mode_bits(XlnxZynqMPCAN *s)
> > +{
> > + /* Wake up interrupt bit. */
> > + bool wakeup_irq_val = (ARRAY_FIELD_EX32(s->regs,
> MODE_SELECT_REGISTER,
> > + SLEEP) == 0) && ARRAY_FIELD_EX32(s->regs,
> > + STATUS_REGISTER, SLEEP);
> > +
> > + /* Sleep interrupt bit. */
> > + bool sleep_irq_val = (ARRAY_FIELD_EX32(s->regs,
> MODE_SELECT_REGISTER,
> > + SLEEP) && (ARRAY_FIELD_EX32(s->regs,
> > + STATUS_REGISTER, SLEEP) == 0));
> > +
> > + /* Clear previous core mode status bits. */
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 0);
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 0);
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 0);
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 0);
> > +
> > + /* set current mode bit and generate irqs accordingly. */
> > + if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, LBACK)) {
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 1);
> > + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP)) {
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 1);
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP,
> > + sleep_irq_val);
> > + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SNOOP))
> {
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 1);
> > + } else {
> > + /* If all bits are zero then XlnxZynqMPCAN is set in normal mode.
> > */
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 1);
> > + /* Set wakeup interrupt bit. */
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP,
> > + wakeup_irq_val);
> > + }
> > +
> > + can_update_irq(s);
> > +}
> > +
> > +static void can_exit_sleep_mode(XlnxZynqMPCAN *s)
> > +{
> > + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, 0);
> > + update_status_register_mode_bits(s);
> > +}
> > +
> > +static void generate_frame(qemu_can_frame *frame, uint32_t *data)
> > +{
> > + frame->can_id = data[0];
> > + frame->can_dlc = FIELD_EX32(data[1], TXFIFO_DLC, DLC);
> > +
> > + frame->data[0] = FIELD_EX32(data[2], TXFIFO_DATA1, DB3);
> > + frame->data[1] = FIELD_EX32(data[2], TXFIFO_DATA1, DB2);
> > + frame->data[2] = FIELD_EX32(data[2], TXFIFO_DATA1, DB1);
> > + frame->data[3] = FIELD_EX32(data[2], TXFIFO_DATA1, DB0);
> > +
> > + frame->data[4] = FIELD_EX32(data[3], TXFIFO_DATA2, DB7);
> > + frame->data[5] = FIELD_EX32(data[3], TXFIFO_DATA2, DB6);
> > + frame->data[6] = FIELD_EX32(data[3], TXFIFO_DATA2, DB5);
> > + frame->data[7] = FIELD_EX32(data[3], TXFIFO_DATA2, DB4);
> > +}
> > +
> > +static bool tx_ready_check(XlnxZynqMPCAN *s)
> > +{
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "Attempting to transfer data
> while"
> > + " XlnxZynqMPCAN%d is in reset mode\n",
> > s->cfg.ctrl_idx);
> > + return false;
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "Attempting to transfer data
> while"
> > + " XlnxZynqMPCAN%d is in configuration mode.Reset the"
> > + " core so operations can start fresh\n",
> > + s->cfg.ctrl_idx);
> > + return false;
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "Attempting to transfer data
> while"
> > + " XlnxZynqMPCAN%d is in SNOOP MODE\n",
> > + s->cfg.ctrl_idx);
> > + return false;
> > + }
> > +
> > + return true;
> > +}
> > +
> > +static void transfer_fifo(XlnxZynqMPCAN *s, Fifo32 *fifo)
> > +{
> > + qemu_can_frame frame;
> > + uint32_t data[CAN_FRAME_SIZE];
> > + int i;
> > + bool can_tx = tx_ready_check(s);
> > +
> > + if (can_tx) {
> > + while (!fifo32_is_empty(fifo)) {
> > + for (i = 0; i < CAN_FRAME_SIZE; i++) {
> > + data[i] = fifo32_pop(fifo);
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
> > + /*
> > + * Controller in loopback. In Loopback mode, the
> > XlnxZynqMPCAN
> > + * core transmits a recessive bitstream on to the
> > XlnxZynqMPCAN
> > + * Bus. Any message transmitted is looped back to the RX
> > line
> > + * and acknowledged. The XlnxZynqMPCAN core receives any
> > + * message that it transmits.
> > + */
> > + if (fifo32_is_full(&s->rx_fifo)) {
> > + DB_PRINT("Loopback: RX FIFO is full."
> > + "TX FIFO will be flushed.\n");
> > +
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > + RXOFLW, 1);
> > + } else {
> > + for (i = 0; i < CAN_FRAME_SIZE; i++) {
> > + fifo32_push(&s->rx_fifo, data[i]);
> > + }
> > +
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > + RXOK, 1);
> > + }
> > + } else {
> > + /* Normal mode Tx. */
> > + generate_frame(&frame, data);
> > +
> > + can_bus_client_send(&s->bus_client, &frame, 1);
>
>
> I had a quick glance at can_bus_client_send():
>
> It did:
>
> QTAILQ_FOREACH(peer, &bus->clients, next) {
> if (peer->info->can_receive(peer)) {
> if (peer == client) {
> /* No loopback support for now */
> continue;
> }
> if (peer->info->receive(peer, frames, frames_cnt) > 0) {
> ret = 1;
> }
> }
> }
>
> which looks not correct. We need to use qemu_send_packet() instead of
> calling peer->info->receive() directly which bypasses filters completely.
[Vikram Garhwal] I am looking into this. Will address it in v2.
>
>
> > + }
> > + }
> > +
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 1);
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, TXBFLL, 0);
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) {
> > + can_exit_sleep_mode(s);
> > + }
> > + } else {
> > + DB_PRINT("CAN is not enabled for data transfer.\n");
> > + }
> > +
> > + can_update_irq(s);
> > +}
> > +
> > +static uint64_t can_srr_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > +
> > + ARRAY_FIELD_DP32(s->regs, SOFTWARE_RESET_REGISTER, CEN,
> > + FIELD_EX32(val, SOFTWARE_RESET_REGISTER, CEN));
> > +
> > + if (FIELD_EX32(val, SOFTWARE_RESET_REGISTER, SRST)) {
> > + DB_PRINT("Resetting XlnxZynqMPCAN%d\n", s->cfg.ctrl_idx);
> > +
> > + /* First, core will do software reset then will enter in config
> > mode. */
> > + can_config_reset(s);
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
> > + can_config_mode(s);
> > +
> > + } else {
> > + /*
> > + * Leave config mode. Now XlnxZynqMPCAN core will enter Normal,
> Sleep,
> > + * snoop or Loopback mode depending upon LBACK, SLEEP, SNOOP
> regsiter
> > + * states.
> > + */
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 0);
> > +
> > + /* XlnxZynqMP CAN is out of config mode. it will send pending
> > data. */
> > + transfer_fifo(s, &s->txhpb_fifo);
> > + transfer_fifo(s, &s->tx_fifo);
> > +
> > + update_status_register_mode_bits(s);
> > + }
> > +
> > + return s->regs[R_SOFTWARE_RESET_REGISTER];
> > +}
> > +
> > +static uint64_t can_msr_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > + uint8_t multi_mode = 0;
> > +
> > + /*
> > + * Multiple mode set check. This is done to make sure user doesn't set
> > + * multiple modes.
> > + */
> > + multi_mode = FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK) +
> > + FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP) +
> > + FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP);
> > +
> > + if (multi_mode > 1) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "Attempting to configure
> several modes "
> > + "simultaneously. One mode will be selected according
> > to "
> > + "their priority: LBACK > SLEEP > SNOOP.\n ");
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
> > + /* We are in configuration mode, any mode can be selected. */
> > + s->regs[R_MODE_SELECT_REGISTER] = val;
> > + } else {
> > + bool sleep_mode_bit = FIELD_EX32(val, MODE_SELECT_REGISTER,
> SLEEP);
> > +
> > + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP,
> sleep_mode_bit);
> > +
> > + if (FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK)) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "Attempting to set LBACK
> mode "
> > + "without setting CEN bit as 0\n");
> > + } else if (FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP)) {
> > + qemu_log_mask(LOG_GUEST_ERROR, "Attempting to set SNOOP
> mode "
> > + "without setting CEN bit as 0\n");
> > + }
> > + update_status_register_mode_bits(s);
> > + }
> > + return s->regs[R_MODE_SELECT_REGISTER];
> > +}
> > +
> > +static uint64_t can_brpr_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > +
> > + /* Only allow writes when in config mode. */
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
> > + val = s-
> >regs[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER];
> > + }
> > +
> > + return val;
> > +}
> > +
> > +static uint64_t can_btr_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > +
> > + /* Only allow writes when in config mode. */
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
> > + val = s->regs[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER];
> > + }
> > +
> > + return val;
> > +}
> > +
> > +static uint64_t can_tcr_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > +
> > + if (FIELD_EX32(val, TIMESTAMP_REGISTER, CTS)) {
> > + s->rx_time_stamp = 0;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void update_rx_fifo(XlnxZynqMPCAN *s, const qemu_can_frame
> *frame)
> > +{
> > + uint32_t filter_pass = 0;
> > +
> > + /* If no filter is enabled. Message will be stored in FIFO. */
> > + if (!((ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) |
> > + (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) |
> > + (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) |
> > + (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)))) {
> > + filter_pass = 1;
>
>
> Any reason for not doing such filtering in xlnx_zynqmp_can_can_receive()?
[Vikram Garhwal] Intention of xlnx_zynqmp_can_can_receive() is to see if CAN is
enabled to receive the data or not.
Reason I put is here because here we basically filter and store
all received message here only.
>
>
> > + }
> > +
> > + /*
> > + * Messages that pass any of the acceptance filters will be stored in
> > + * the RX FIFO.
> > + */
> > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) {
> > + uint32_t id_masked = s->regs[R_AFMR1] & frame->can_id;
> > + uint32_t filter_id_masked = s->regs[R_AFMR1] & s->regs[R_AFIR1];
> > +
> > + if (filter_id_masked == id_masked) {
> > + filter_pass = 1;
> > + }
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) {
> > + uint32_t id_masked = s->regs[R_AFMR2] & frame->can_id;
> > + uint32_t filter_id_masked = s->regs[R_AFMR2] & s->regs[R_AFIR2];
> > +
> > + if (filter_id_masked == id_masked) {
> > + filter_pass = 1;
> > + }
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) {
> > + uint32_t id_masked = s->regs[R_AFMR3] & frame->can_id;
> > + uint32_t filter_id_masked = s->regs[R_AFMR3] & s->regs[R_AFIR3];
> > +
> > + if (filter_id_masked == id_masked) {
> > + filter_pass = 1;
> > + }
> > + }
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
> > + uint32_t id_masked = s->regs[R_AFMR4] & frame->can_id;
> > + uint32_t filter_id_masked = s->regs[R_AFMR4] & s->regs[R_AFIR4];
> > +
> > + if (filter_id_masked == id_masked) {
> > + filter_pass = 1;
> > + }
> > + }
> > +
> > + /* Store the message in fifo if it passed through any of the filters.
> > */
> > + if (filter_pass && frame->can_dlc <= MAX_DLC) {
> > +
> > + if (fifo32_is_full(&s->rx_fifo)) {
> > + DB_PRINT("RX FIFO is full.\n");
> > +
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> RXOFLW, 1);
> > + } else {
> > + s->rx_time_stamp += 1;
> > +
> > + fifo32_push(&s->rx_fifo, frame->can_id);
> > +
> > + fifo32_push(&s->rx_fifo, (deposit32(0, R_RXFIFO_DLC_DLC_SHIFT,
> > + R_RXFIFO_DLC_DLC_LENGTH,
> > + frame->can_dlc) |
> > + deposit32(0, R_RXFIFO_DLC_RXT_SHIFT,
> > + R_RXFIFO_DLC_RXT_LENGTH,
> > + s->rx_time_stamp)));
> > +
> > + /* First 32 bit of the data. */
> > + fifo32_push(&s->rx_fifo, (deposit32(0,
> R_TXFIFO_DATA1_DB3_SHIFT,
> > + R_TXFIFO_DATA1_DB3_LENGTH,
> > + frame->data[0]) |
> > + deposit32(0,
> > R_TXFIFO_DATA1_DB2_SHIFT,
> > + R_TXFIFO_DATA1_DB2_LENGTH,
> > + frame->data[1]) |
> > + deposit32(0,
> > R_TXFIFO_DATA1_DB1_SHIFT,
> > + R_TXFIFO_DATA1_DB1_LENGTH,
> > + frame->data[2]) |
> > + deposit32(0,
> > R_TXFIFO_DATA1_DB0_SHIFT,
> > + R_TXFIFO_DATA1_DB0_LENGTH,
> > + frame->data[3])));
> > + /* Last 32 bit of the data. */
> > + fifo32_push(&s->rx_fifo, (deposit32(0,
> R_TXFIFO_DATA2_DB7_SHIFT,
> > + R_TXFIFO_DATA2_DB7_LENGTH,
> > + frame->data[4]) |
> > + deposit32(0,
> > R_TXFIFO_DATA2_DB6_SHIFT,
> > + R_TXFIFO_DATA2_DB6_LENGTH,
> > + frame->data[5]) |
> > + deposit32(0,
> > R_TXFIFO_DATA2_DB5_SHIFT,
> > + R_TXFIFO_DATA2_DB5_LENGTH,
> > + frame->data[6]) |
> > + deposit32(0,
> > R_TXFIFO_DATA2_DB4_SHIFT,
> > + R_TXFIFO_DATA2_DB4_LENGTH,
> > + frame->data[7])));
> > +
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK,
> 1);
> > + }
> > +
> > + can_update_irq(s);
> > +
> > + } else {
> > + DB_PRINT("Message didn't pass through any filter"
> > + "or dlc is not in range\n");
> > + }
> > +}
> > +
> > +static uint64_t can_rxfifo_pre_read(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t r = 0;
> > +
> > + if (!fifo32_is_empty(&s->rx_fifo)) {
> > + r = fifo32_pop(&s->rx_fifo);
> > + } else {
> > + DB_PRINT("No message in RXFIFO\n");
> > +
> > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXUFLW,
> 1);
> > + }
> > +
> > + can_update_irq(s);
> > + return r;
> > +}
> > +
> > +static void can_filter_enable_post_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1) &&
> > + ARRAY_FIELD_EX32(s->regs, AFR, UAF2) &&
> > + ARRAY_FIELD_EX32(s->regs, AFR, UAF3) &&
> > + ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
> > +
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 1);
> > +
> > + } else {
> > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 0);
> > + }
> > +}
> > +
> > +static uint64_t can_filter_mask_pre_write(RegisterInfo *reg, uint64_t
> val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t reg_idx = (reg->access->addr) / 4;
> > + uint32_t val = val64;
> > + uint32_t filter_number = (reg_idx - R_AFMR1) / 2;
> > +
> > + /* modify an acceptance filter, the corresponding UAF bit should be
> > '0.'
> */
> > + if (!(s->regs[R_AFR] & (1 << filter_number))) {
> > + s->regs[reg_idx] = val;
> > + } else {
> > + DB_PRINT("Acceptance filter %d mask is not set as it's
> > corresponding "
> > + "UAF bit is not set to 0\n", filter_number + 1);
> > + }
> > +
> > + return s->regs[reg_idx];
> > +}
> > +
> > +static uint64_t can_filter_id_pre_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t reg_idx = (reg->access->addr) / 4;
> > + uint32_t val = val64;
> > + uint32_t filter_number = (reg_idx - R_AFIR1) / 2;
> > +
> > + if (!(s->regs[R_AFR] & (1 << filter_number))) {
> > + s->regs[reg_idx] = val;
> > + } else {
> > + DB_PRINT("Acceptance filter %d id is not set as it's corresponding
> > "
> > + "UAF bit is not set to 0\n", filter_number + 1);
> > + }
> > +
> > + return s->regs[reg_idx];
> > +}
> > +
> > +static void can_tx_post_write(RegisterInfo *reg, uint64_t val64)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > + uint32_t val = val64;
> > +
> > + bool is_txhpb = reg->access->addr > A_TXFIFO_DATA2;
> > +
> > + bool initiate_transfer = (reg->access->addr == A_TXFIFO_DATA2) ||
> > + (reg->access->addr == A_TXHPB_DATA2);
> > +
> > + Fifo32 *f = is_txhpb ? &s->txhpb_fifo : &s->tx_fifo;
> > +
> > + DB_PRINT("TX FIFO write for CAN%d\n", s->cfg.ctrl_idx);
> > +
> > + if (!fifo32_is_full(f)) {
> > + fifo32_push(f, val);
> > + } else {
> > + DB_PRINT("TX FIFO is full.\n");
> > + }
> > +
> > + /* Initiate the message send if TX register is written. */
> > + if (initiate_transfer &&
> > + ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
> > + transfer_fifo(s, f);
> > + }
> > +
> > + can_update_irq(s);
> > +}
> > +
> > +static const RegisterAccessInfo can_regs_info[] = {
> > + { .name = "SOFTWARE_RESET_REGISTER",
> > + .addr = A_SOFTWARE_RESET_REGISTER,
> > + .rsvd = 0xfffffffc,
> > + .pre_write = can_srr_pre_write,
> > + },{ .name = "MODE_SELECT_REGISTER",
> > + .addr = A_MODE_SELECT_REGISTER,
> > + .rsvd = 0xfffffff8,
> > + .pre_write = can_msr_pre_write,
> > + },{ .name = "ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER",
> > + .addr = A_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER,
> > + .rsvd = 0xffffff00,
> > + .pre_write = can_brpr_pre_write,
> > + },{ .name = "ARBITRATION_PHASE_BIT_TIMING_REGISTER",
> > + .addr = A_ARBITRATION_PHASE_BIT_TIMING_REGISTER,
> > + .rsvd = 0xfffffe00,
> > + .pre_write = can_btr_pre_write,
> > + },{ .name = "ERROR_COUNTER_REGISTER",
> > + .addr = A_ERROR_COUNTER_REGISTER,
> > + .rsvd = 0xffff0000,
> > + .ro = 0xffffffff,
> > + },{ .name = "ERROR_STATUS_REGISTER",
> > + .addr = A_ERROR_STATUS_REGISTER,
> > + .rsvd = 0xffffffe0,
> > + .w1c = 0x1f,
> > + },{ .name = "STATUS_REGISTER", .addr = A_STATUS_REGISTER,
> > + .reset = 0x1,
> > + .rsvd = 0xffffe000,
> > + .ro = 0x1fff,
> > + },{ .name = "INTERRUPT_STATUS_REGISTER",
> > + .addr = A_INTERRUPT_STATUS_REGISTER,
> > + .reset = 0x6000,
> > + .rsvd = 0xffff8000,
> > + .ro = 0x7fff,
> > + },{ .name = "INTERRUPT_ENABLE_REGISTER",
> > + .addr = A_INTERRUPT_ENABLE_REGISTER,
> > + .rsvd = 0xffff8000,
> > + .post_write = can_ier_post_write,
> > + },{ .name = "INTERRUPT_CLEAR_REGISTER",
> > + .addr = A_INTERRUPT_CLEAR_REGISTER,
> > + .rsvd = 0xffff8000,
> > + .pre_write = can_icr_pre_write,
> > + },{ .name = "TIMESTAMP_REGISTER",
> > + .addr = A_TIMESTAMP_REGISTER,
> > + .rsvd = 0xfffffffe,
> > + .pre_write = can_tcr_pre_write,
> > + },{ .name = "WIR", .addr = A_WIR,
> > + .reset = 0x3f3f,
> > + .rsvd = 0xffff0000,
> > + },{ .name = "TXFIFO_ID", .addr = A_TXFIFO_ID,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXFIFO_DLC", .addr = A_TXFIFO_DLC,
> > + .rsvd = 0xfffffff,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXFIFO_DATA1", .addr = A_TXFIFO_DATA1,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXFIFO_DATA2", .addr = A_TXFIFO_DATA2,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXHPB_ID", .addr = A_TXHPB_ID,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXHPB_DLC", .addr = A_TXHPB_DLC,
> > + .rsvd = 0xfffffff,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXHPB_DATA1", .addr = A_TXHPB_DATA1,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "TXHPB_DATA2", .addr = A_TXHPB_DATA2,
> > + .post_write = can_tx_post_write,
> > + },{ .name = "RXFIFO_ID", .addr = A_RXFIFO_ID,
> > + .ro = 0xffffffff,
> > + .post_read = can_rxfifo_pre_read,
> > + },{ .name = "RXFIFO_DLC", .addr = A_RXFIFO_DLC,
> > + .rsvd = 0xfff0000,
> > + .post_read = can_rxfifo_pre_read,
> > + },{ .name = "RXFIFO_DATA1", .addr = A_RXFIFO_DATA1,
> > + .post_read = can_rxfifo_pre_read,
> > + },{ .name = "RXFIFO_DATA2", .addr = A_RXFIFO_DATA2,
> > + .post_read = can_rxfifo_pre_read,
> > + },{ .name = "AFR", .addr = A_AFR,
> > + .rsvd = 0xfffffff0,
> > + .post_write = can_filter_enable_post_write,
> > + },{ .name = "AFMR1", .addr = A_AFMR1,
> > + .pre_write = can_filter_mask_pre_write,
> > + },{ .name = "AFIR1", .addr = A_AFIR1,
> > + .pre_write = can_filter_id_pre_write,
> > + },{ .name = "AFMR2", .addr = A_AFMR2,
> > + .pre_write = can_filter_mask_pre_write,
> > + },{ .name = "AFIR2", .addr = A_AFIR2,
> > + .pre_write = can_filter_id_pre_write,
> > + },{ .name = "AFMR3", .addr = A_AFMR3,
> > + .pre_write = can_filter_mask_pre_write,
> > + },{ .name = "AFIR3", .addr = A_AFIR3,
> > + .pre_write = can_filter_id_pre_write,
> > + },{ .name = "AFMR4", .addr = A_AFMR4,
> > + .pre_write = can_filter_mask_pre_write,
> > + },{ .name = "AFIR4", .addr = A_AFIR4,
> > + .pre_write = can_filter_id_pre_write,
> > + }
> > +};
> > +
> > +static const MemoryRegionOps can_ops = {
> > + .read = register_read_memory,
> > + .write = register_write_memory,
> > + .endianness = DEVICE_LITTLE_ENDIAN,
> > + .valid = {
> > + .min_access_size = 4,
> > + .max_access_size = 4,
> > + },
> > +};
> > +
> > +static void xlnx_zynqmp_can_reset(DeviceState *dev)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(dev);
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(s->reg_info); ++i) {
> > + register_reset(&s->reg_info[i]);
> > + }
> > +
> > + /*
> > + * Reset FIFOs when CAN model is reset. This will clear the fifo writes
> > + * done by post_write which gets called from register_reset function,
> > + * post_write handle will not be able to trigger tx because CAN will be
> > + * disabled when software_reset_register is cleared first.
> > + */
> > + fifo32_reset(&s->rx_fifo);
> > + fifo32_reset(&s->tx_fifo);
> > + fifo32_reset(&s->txhpb_fifo);
> > +}
> > +
> > +static int xlnx_zynqmp_can_can_receive(CanBusClientState *client)
> > +{
> > + XlnxZynqMPCAN *s = container_of(client, XlnxZynqMPCAN, bus_client);
> > +
> > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
> > + DB_PRINT("XlnxZynqMPCAN%d Controller is reset\n", s->cfg.ctrl_idx);
> > + return 0;
> > + } else if ((ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER,
> CEN)) == 0) {
> > + DB_PRINT("XlnxZynqMPCAN%d is disabled. Messages will be
> discarded\n",
> > + s->cfg.ctrl_idx);
> > + return 0;
> > + } else {
> > + return 1;
> > + }
> > +}
> > +
> > +static ssize_t xlnx_zynqmp_can_receive(CanBusClientState *client,
> > + const qemu_can_frame *buf, size_t buf_size)
> > {
> > + XlnxZynqMPCAN *s = container_of(client, XlnxZynqMPCAN, bus_client);
> > + const qemu_can_frame *frame = buf;
> > +
> > + DB_PRINT("Incoming data for CAN%d\n", s->cfg.ctrl_idx);
> > +
> > + if (buf_size <= 0) {
> > + DB_PRINT("junk data received on XlnxZynqMPCAN bus\n");
> > + return 0;
> > + }
> > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
> > + /*
> > + * XlnxZynqMPCAN will not participate in normal bus communication
> and
> > + * does not receive any messages transmitted by other CAN nodes.
> > + */
> > + DB_PRINT("XlnxZynqMPCAN is in loopback mode."
> > + " It will not receive data.\n");
> > +
> > + } else if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
> > + /* Snoop Mode: Just keep the data. no response back. */
> > + update_rx_fifo(s, frame);
> > + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP))) {
> > + /*
> > + * XlnxZynqMPCAN is in sleep mode. Any data on bus will bring it to
> wake
> > + * up state.
> > + */
> > + can_exit_sleep_mode(s);
> > + update_rx_fifo(s, frame);
> > + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) == 0) {
> > + update_rx_fifo(s, frame);
> > + } else {
> > + DB_PRINT("Can't receive data as XlnxZynqMPCAN is not set
> correctly.\n");
> > + }
> > +
> > + return 1;
> > +}
> > +
> > +static CanBusClientInfo can_xilinx_bus_client_info = {
> > + .can_receive = xlnx_zynqmp_can_can_receive,
> > + .receive = xlnx_zynqmp_can_receive,
> > +};
> > +
> > +static int xlnx_zynqmp_can_connect_to_bus(XlnxZynqMPCAN *s,
> CanBusState *bus)
> > +{
> > + s->bus_client.info = &can_xilinx_bus_client_info;
> > +
> > + if (can_bus_insert_client(bus, &s->bus_client) < 0) {
> > + return -1;
> > + }
> > + return 0;
> > +}
> > +
> > +static void xlnx_zynqmp_can_realize(DeviceState *dev, Error **errp)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(dev);
> > +
> > + if (s->cfg.ctrl_idx > MAX_CAN_CTRLS) {
> > + error_setg(errp, "ctrl-idx: %d exceeds max XlnxZynqMPCAN
> controller "
> > + "index", s->cfg.ctrl_idx);
> > + return;
> > + }
> > +
> > + if (s->canbus[s->cfg.ctrl_idx]) {
> > + if (xlnx_zynqmp_can_connect_to_bus(s, s->canbus[s->cfg.ctrl_idx]) <
> 0) {
> > + error_setg(errp, "xlnx_zynqmp_can_connect_to_bus failed");
> > + }
> > +
> > + } else {
> > + /* If no bus is set. */
> > + DB_PRINT("Canbus%d property is not set for xlnxCAN%d\n",
> > + s->cfg.ctrl_idx, s->cfg.ctrl_idx);
> > + }
> > +
> > + /* Create RX FIFO, TXFIFO, TXHPB storage. */
> > + fifo32_create(&s->rx_fifo, RXFIFO_SIZE);
> > + fifo32_create(&s->tx_fifo, RXFIFO_SIZE);
> > + fifo32_create(&s->txhpb_fifo, CAN_FRAME_SIZE);
> > +}
> > +
> > +static void xlnx_zynqmp_can_init(Object *obj)
> > +{
> > + XlnxZynqMPCAN *s = XLNX_ZYNQMP_CAN(obj);
> > + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> > +
> > + RegisterInfoArray *reg_array;
> > +
> > + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_CAN,
> > + XLNX_ZYNQMP_CAN_R_MAX * 4);
> > + reg_array = register_init_block32(DEVICE(obj), can_regs_info,
> > + ARRAY_SIZE(can_regs_info),
> > + s->reg_info, s->regs,
> > + &can_ops,
> > + XLNX_ZYNQMP_CAN_ERR_DEBUG,
> > + XLNX_ZYNQMP_CAN_R_MAX * 4);
> > +
> > + memory_region_add_subregion(&s->iomem, 0x00, ®_array->mem);
> > + sysbus_init_mmio(sbd, &s->iomem);
> > + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
> > +
> > + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS,
> > + (Object **)&s->canbus[0],
> > + qdev_prop_allow_set_link_before_realize,
> > + 0, &error_abort);
> > +
> > + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS,
> > + (Object **)&s->canbus[1],
> > + qdev_prop_allow_set_link_before_realize,
> > + 0, &error_abort);
> > +}
> > +
> > +static const VMStateDescription vmstate_can = {
> > + .name = TYPE_XLNX_ZYNQMP_CAN,
> > + .version_id = 1,
> > + .minimum_version_id = 1,
> > + .fields = (VMStateField[]) {
> > + VMSTATE_FIFO32(rx_fifo, XlnxZynqMPCAN),
> > + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCAN,
> XLNX_ZYNQMP_CAN_R_MAX),
> > + VMSTATE_UINT8(cfg.ctrl_idx, XlnxZynqMPCAN),
> > + VMSTATE_END_OF_LIST(),
> > + }
> > +};
> > +
> > +static Property xlnx_zynqmp_can_properties[] = {
> > + DEFINE_PROP_UINT8("ctrl-idx", XlnxZynqMPCAN, cfg.ctrl_idx, 0),
> > + DEFINE_PROP_END_OF_LIST(),
> > +};
> > +
> > +static void xlnx_zynqmp_can_class_init(ObjectClass *klass, void *data)
> > +{
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > + dc->reset = xlnx_zynqmp_can_reset;
> > + dc->realize = xlnx_zynqmp_can_realize;
> > + device_class_set_props(dc, xlnx_zynqmp_can_properties);
> > + dc->vmsd = &vmstate_can;
> > +}
> > +
> > +static const TypeInfo can_info = {
> > + .name = TYPE_XLNX_ZYNQMP_CAN,
> > + .parent = TYPE_SYS_BUS_DEVICE,
> > + .instance_size = sizeof(XlnxZynqMPCAN),
> > + .class_init = xlnx_zynqmp_can_class_init,
> > + .instance_init = xlnx_zynqmp_can_init,
> > +};
> > +
> > +static void can_register_types(void)
> > +{
> > + type_register_static(&can_info);
> > +}
> > +
> > +type_init(can_register_types)
> > diff --git a/include/hw/net/xlnx-zynqmp-can.h b/include/hw/net/xlnx-
> zynqmp-can.h
> > new file mode 100644
> > index 0000000..537dbc2
> > --- /dev/null
> > +++ b/include/hw/net/xlnx-zynqmp-can.h
> > @@ -0,0 +1,77 @@
> > +/*
> > + * QEMU model of the Xilinx CAN device.
> > + *
> > + * Copyright (c) 2019 Xilinx Inc.
> > + * Partially autogenerated by xregqemu.py 2019-06-20.
> > + *
> > + * Written-by: Vikram Garhwal<fnu.vik...@xilinx.com>
> > + *
> > + * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz
> Eren and
> > + * Pavel Pisa.
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> > + * of this software and associated documentation files (the "Software"), to
> deal
> > + * in the Software without restriction, including without limitation the
> > rights
> > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > + * copies of the Software, and to permit persons to whom the Software is
> > + * furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be included
> in
> > + * all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> ARISING FROM,
> > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> DEALINGS IN
> > + * THE SOFTWARE.
> > + */
> > +
> > +#ifndef HW_CAN_XILINX_H
> > +#define HW_CAN_XILINX_H
> > +
> > +#include "hw/register.h"
> > +#include "net/can_emu.h"
> > +#include "net/can_host.h"
> > +#include "qemu/fifo32.h"
> > +
> > +#define TYPE_XLNX_ZYNQMP_CAN "xlnx.zynqmp-can"
> > +
> > +#define XLNX_ZYNQMP_CAN(obj) \
> > + OBJECT_CHECK(XlnxZynqMPCAN, (obj), TYPE_XLNX_ZYNQMP_CAN)
> > +
> > +#define MAX_CAN_CTRLS 2
> > +#define XLNX_ZYNQMP_CAN_R_MAX (0x84 / 4)
> > +#define MAILBOX_CAPACITY 64
> > +
> > +/* Each CAN_FRAME will have 4 * 32bit size. */
> > +#define CAN_FRAME_SIZE 4
> > +#define RXFIFO_SIZE (MAILBOX_CAPACITY * CAN_FRAME_SIZE)
> > +
> > +
> > +typedef struct XlnxZynqMPCAN {
>
>
> For device state we usually have a "State" suffix. So it's better use
> "XlnxZynqMPCANState".
[Vikram Garhwal] Thanks for catching this. I will change it in v2.
>
> Thanks
>
>
> > + SysBusDevice parent_obj;
> > + MemoryRegion iomem;
> > +
> > + qemu_irq irq;
> > +
> > + CanBusClientState bus_client;
> > + CanBusState *canbus[MAX_CAN_CTRLS];
> > +
> > + struct {
> > + uint8_t ctrl_idx;
> > + } cfg;
> > +
> > + RegisterInfo reg_info[XLNX_ZYNQMP_CAN_R_MAX];
> > + uint32_t regs[XLNX_ZYNQMP_CAN_R_MAX];
> > +
> > + uint16_t rx_time_stamp;
> > +
> > + Fifo32 rx_fifo;
> > + Fifo32 tx_fifo;
> > + Fifo32 txhpb_fifo;
> > +
> > +} XlnxZynqMPCAN;
> > +
> > +#endif
