On Tue, Mar 12, 2019 at 06:36:05PM +0100, Markus Armbruster wrote: Hi,
Here are some steps. If you have a hard time finding any particular file let me know and I can send them to you. > = hw/arm/xilinx_zynq.c = > "Edgar E. Iglesias" <edgar.igles...@gmail.com> (maintainer:Xilinx Zynq) > Alistair Francis <alist...@alistair23.me> (maintainer:Xilinx Zynq) > Peter Maydell <peter.mayd...@linaro.org> (maintainer:Xilinx Zynq) > qemu-...@nongnu.org (open list:Xilinx Zynq) You'll need suitable ARMv7 Linux or u-boot images. You can build on your own or download from Xilinx, we provide pre-built images (will need to register): https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-design-tools.html Download the ZC702 or the ZED BSP, untar it, cd into pre-builts and run: tar -xzvf avnet-digilent-zedboard-v2018.3-final.bsp cd avnet-digilent-zedboard-2018.3/pre-built/linux/images/ qemu-system-aarch64 -M xilinx-zynq-a9 -serial null -serial stdio -kernel zImage -dtb system.dtb -m 1024 If using PetaLinux BSP images from Xilinx, login as root/root. > > = hw/arm/xlnx-versal-virt.c = > Alistair Francis <alist...@alistair23.me> (maintainer:Xilinx ZynqMP) > "Edgar E. Iglesias" <edgar.igles...@gmail.com> (maintainer:Xilinx ZynqMP) > Peter Maydell <peter.mayd...@linaro.org> (maintainer:Xilinx ZynqMP) > qemu-...@nongnu.org (open list:Xilinx ZynqMP) You'll need an Aarch64 Linux kernel. Ubuntus installer for example: http://ports.ubuntu.com/ubuntu-ports/dists/cosmic-updates/main/installer-arm64/current/images/netboot/ubuntu-installer/arm64/ Download linux and initrd.gz qemu-system-aarch64 -M xlnx-versal-virt -m 2G -serial mon:stdio -display none -device virtio-rng-device,bus=virtio-mmio-bus.0 -kernel linux -initrd initrd.gz > > = hw/arm/xlnx-zcu102.c = > Alistair Francis <alist...@alistair23.me> (maintainer:Xilinx ZynqMP) > "Edgar E. Iglesias" <edgar.igles...@gmail.com> (maintainer:Xilinx ZynqMP) > Peter Maydell <peter.mayd...@linaro.org> (maintainer:Xilinx ZynqMP) > qemu-...@nongnu.org (open list:Xilinx ZynqMP) https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-design-tools.html Download the ZCU102 BSP tar -xzvf xilinx-zcu102-v2018.3-final.bsp cd xilinx-zcu102-2018.3/pre-built/linux/images/ qemu-system-aarch64 -M xlnx-zcu102 -serial stdio -m 2G -kernel xen-Image -dtb zcu102.dtb -initrd rootfs.cpio.gz -append "rdinit=/bin/sh console=ttyPS0 maxcpus=4 earlycon=cdns,mmio,0xFF000000,115200n8" Alternatively you can use TBM, see further down the email. > > = hw/cris/axis_dev88.c = > "Edgar E. Iglesias" <edgar.igles...@gmail.com> (maintainer:Axis Dev88) > http://wiki.qemu.org/download/cris-axisdev88-img-linux2_6_33.tgz The archive contains a run-script. At the prompt run /selftest.sh > = hw/microblaze/petalogix_ml605_mmu.c = > "Edgar E. Iglesias" <edgar.igles...@gmail.com> > (maintainer:petalogix_ml605) > > = hw/microblaze/petalogix_s3adsp1800_mmu.c = > "Edgar E. Iglesias" <edgar.igles...@gmail.com> > (maintainer:petalogix_s3adsp1800) We used to publish images for these on the QEMU wiki but they seem to be gone now. You can download pre-built MicroBlaze toolchains from Xilinx and build a kernel + rootfs on your own. qemu-system-microblaze -M petalogix-ml605 -nographic -kernel Image qemu-system-microblaze -M petalogix-s3adsp1800 -nographic -kernel Image Alternatively, you can try them using TBM: git clone https://github.com/edgarigl/tbm.git cd tbm Create a .config file pointing to toolchains (something like the following): cat .config AARCH64_CROSS=/opt/Xilinx/SDK/2018.3/gnu/aarch64/lin/aarch64-none/bin/aarch64-none-elf- ARM_CROSS=/opt/Xilinx/SDK/2018.3/gnu/armr5/lin/gcc-arm-none-eabi/bin/armr5-none-eabi- MB_CROSS=/opt/Xilinx/SDK/2018.3/gnu/microblaze/lin/bin/microblaze-xilinx-elf- Build: make CFG=configs/petalogix-ml605.cfg make CFG=configs/petalogix-s3adsp1800.cfg make CFG=configs/zynqmp-apu.cfg Run: qemu-system-microblazeel -M petalogix-ml605 -serial stdio -kernel build/petalogix-ml605/main/ctest-bare qemu-system-microblazeel -M petalogix-s3adsp1800 -serial stdio -kernel build/petalogix-s3adsp1800/main/ctest-bare qemu-system-aarch64 -M xlnx-zcu102,secure=on -serial stdio -kernel build/zynqmp/apu/ctest-bare > = hw/microblaze/xlnx-zynqmp-pmu.c = > Alistair Francis <alist...@alistair23.me> (maintainer:Xilinx ZynqMP) > "Edgar E. Iglesias" <edgar.igles...@gmail.com> (maintainer:Xilinx ZynqMP) > Peter Maydell <peter.mayd...@linaro.org> (maintainer:Xilinx ZynqMP) > qemu-...@nongnu.org (open list:Xilinx ZynqMP) This board is WiP and can't really run SW that outputs stuff yet. Just creating the machine asserts is probably enough testing for now. Cheers, Edgar
