This series of patches add the support for the i.MX25 processor through the
Freescale 3DS evaluation board.
For now a limited set of devices are supported.
* GPT timers (from i.MX31)
* EPIT timers (from i.MX31)
* Serial ports (from i.MX31)
* Ethernet FEC port
* I2C controller
This was tested by:
* booting a minimal linux system
* booting the Xvisor hypervisor.
Jean-Christophe Dubois (4):
i.MX: Add FEC Ethernet Emulator.
i.MX: Add I2C contoller emulator
i.MX: Add i.MX25 3DS evaluation board support
i.MX: Add qtest support for I2C device emulator
default-configs/arm-softmmu.mak | 3 +
hw/arm/Makefile.objs | 1 +
hw/arm/imx25_3ds.c | 273 +++++++++++++
hw/i2c/Makefile.objs | 1 +
hw/i2c/imx_i2c.c | 361 ++++++++++++++++++
hw/i2c/imx_i2c_regs.h | 63 +++
hw/net/Makefile.objs | 1 +
hw/net/imx_fec.c | 820 ++++++++++++++++++++++++++++++++++++++++
include/hw/arm/imx.h | 1 +
tests/Makefile | 3 +
tests/ds1338-test.c | 75 ++++
tests/libqos/i2c-imx.c | 209 ++++++++++
tests/libqos/i2c.h | 3 +
13 files changed, 1814 insertions(+)
create mode 100644 hw/arm/imx25_3ds.c
create mode 100644 hw/i2c/imx_i2c.c
create mode 100644 hw/i2c/imx_i2c_regs.h
create mode 100644 hw/net/imx_fec.c
create mode 100644 tests/ds1338-test.c
create mode 100644 tests/libqos/i2c-imx.c
--
2.1.4
