Add two flash devices to the virt board, so that it can be used for
running guests which want a bootrom image such as UEFI. We provide
two flash devices to make it more convenient to provide both a
read-only UEFI image and a read-write place to store guest-set
UEFI config variables. The '-bios' command line option is set up
to provide an image for the first of the two flash devices.
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
---
hw/arm/virt.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 62 insertions(+), 1 deletion(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 3b55a4b..10f8fcb 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -37,6 +37,7 @@
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "hw/boards.h"
+#include "hw/loader.h"
#include "exec/address-spaces.h"
#include "qemu/bitops.h"
#include "qemu/error-report.h"
@@ -94,7 +95,6 @@ typedef struct VirtBoardInfo {
* a 32 bit VM and leaving space for expansion and in particular for PCI.
*/
static const MemMapEntry a15memmap[] = {
- /* Space up to 0x8000000 is reserved for a boot ROM */
[VIRT_FLASH] = { 0, 0x8000000 },
[VIRT_CPUPERIPHS] = { 0x8000000, 0x20000 },
/* GIC distributor and CPU interfaces sit inside the CPU peripheral space
*/
@@ -375,6 +375,65 @@ static void create_virtio_devices(const VirtBoardInfo
*vbi, qemu_irq *pic)
}
}
+static void create_one_flash(const char *name, hwaddr flashbase,
+ hwaddr flashsize)
+{
+ /* Create and map a single flash device. We use the same
+ * parameters as the flash devices on the Versatile Express board.
+ */
+ DriveInfo *dinfo = drive_get_next(IF_PFLASH);
+ DeviceState *dev = qdev_create(NULL, "cfi.pflash01");
+ const uint64_t sectorlength = 256 * 1024;
+
+ if (dinfo && qdev_prop_set_drive(dev, "drive", dinfo->bdrv)) {
+ abort();
+ }
+
+ qdev_prop_set_uint32(dev, "num-blocks", flashsize / sectorlength);
+ qdev_prop_set_uint64(dev, "sector-length", sectorlength);
+ qdev_prop_set_uint8(dev, "width", 4);
+ qdev_prop_set_uint8(dev, "device-width", 2);
+ qdev_prop_set_uint8(dev, "big-endian", 0);
+ qdev_prop_set_uint16(dev, "id0", 0x89);
+ qdev_prop_set_uint16(dev, "id1", 0x18);
+ qdev_prop_set_uint16(dev, "id2", 0x00);
+ qdev_prop_set_uint16(dev, "id3", 0x00);
+ qdev_prop_set_string(dev, "name", name);
+ qdev_init_nofail(dev);
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, flashbase);
+}
+
+static void create_flash(const VirtBoardInfo *vbi)
+{
+ /* Create two flash devices to fill the VIRT_FLASH space in the memmap.
+ * Any file passed via -bios goes in the first of these.
+ */
+ hwaddr flashsize = vbi->memmap[VIRT_FLASH].size / 2;
+ hwaddr flashbase = vbi->memmap[VIRT_FLASH].base;
+ char *nodename;
+
+ if (bios_name) {
+ const char *fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ if (!fn || load_image_targphys(fn, flashbase, flashsize) < 0) {
+ error_report("Could not load ROM image '%s'", bios_name);
+ exit(1);
+ }
+ }
+
+ create_one_flash("virt.flash0", flashbase, flashsize);
+ create_one_flash("virt.flash1", flashbase + flashsize, flashsize);
+
+ nodename = g_strdup_printf("/flash@%" PRIx64, flashbase);
+ qemu_fdt_add_subnode(vbi->fdt, nodename);
+ qemu_fdt_setprop_string(vbi->fdt, nodename, "compatible", "cfi-flash");
+ qemu_fdt_setprop_sized_cells(vbi->fdt, nodename, "reg",
+ 2, flashbase, 2, flashsize,
+ 2, flashbase + flashsize, 2, flashsize);
+ qemu_fdt_setprop_cell(vbi->fdt, nodename, "bank-width", 4);
+ g_free(nodename);
+}
+
static void *machvirt_dtb(const struct arm_boot_info *binfo, int *fdt_size)
{
const VirtBoardInfo *board = (const VirtBoardInfo *)binfo;
@@ -451,6 +510,8 @@ static void machvirt_init(MachineState *machine)
vmstate_register_ram_global(ram);
memory_region_add_subregion(sysmem, vbi->memmap[VIRT_MEM].base, ram);
+ create_flash(vbi);
+
create_gic(vbi, pic);
create_uart(vbi, pic);
--
1.9.2
