On Thu, 23 Jan 2014 19:23:51 +0800
Fam Zheng <f...@redhat.com> wrote:
> Bcc:
> Subject: Re: [Qemu-devel] Possible bug in monitor code
> Reply-To:
> In-Reply-To: <52e0ec4b.7010...@grnet.gr>
>
> On Thu, 01/23 12:17, Stratos Psomadakis wrote:
> > On 01/23/2014 05:07 AM, Fam Zheng wrote:
> > > On Wed, 01/22 17:53, Stratos Psomadakis wrote:
> > >> Hi,
> > >>
> > >> we've encountered a weird issue regarding monitor (qmp and hmp) behavior
> > >> with qemu-1.7 (and qemu-1.5). The following steps will reproduce the
> > >> issue:
> > >>
> > >> 1) Client A connects to qmp socket with socat
> > >> 2) Client A gets greeting message {"QMP": {"version": ..}
> > >> 3) Client A waits (select on the socket's fd)
> > >> 4) Client B tries to connect to the *same* qmp socket with socat
QMP/HMP can only handle a single client per connection, so this is
not supported. What you could do is to create multiple QMP/HMP instances
on the command-line, but this has never been fully tested so we don't
officially support this either (although it may work).
Now, not gracefully failing on step 4 is a real bug here. I think the
best thing to do would be to close client's B connection. Patches are
welcome :)
> > >> 5) Client B does *NOT* get any greating message
> > >> 6) Client B waits (select on the socket's fd)
> > >> 7) Client B closes connection (kill socat)
> > >> 8) Client A quits too
> > >> 9) Client C connects to qmp socket
> > >> 10) Client C gets *two* greeting messages!!!
> > > Hi Stratos, thank you for debugging and reporting this.
> > >
> > > I tested this sequence but can't fully reproduce this. What I see is 5)
> > > but no
> > > 10). Client C acts normally. And your patch below doesn't solve it for me.
> >
> > Hm, which qemu version (or repo branch / tag) did you use? We did a
> > quick scan of the master branch code / commits, but we didn't find
> > anything that might fix the issue.
>
> I tried on qemu.git master, and also 1.7. I think it is a bug: in my test,
> step
> 5), B not getting any greeting message.
>
> But I get only one greeting message in step 10), which is a bit different from
> what you reported.
>
> And no difference with your patch applied.
>
> Cc'ing Luiz who maintains the monitor code and may have more ideas.
>
> Thanks,
>
> Fam
>
> >
> > > To submit a patch, please follow instructions as described in
> > > http://wiki.qemu.org/Contribute/SubmitAPatch
> > > so it could be picked up by maintainers. Specifically, you need to format
> > > your
> > > patch email with "git format-patch" and add a "Signed-off-by:" line in
> > > your
> > > patch email.
> >
> > Ok. If any dev can confirm that this is a bug (and that the patch below
> > is the correct way to fix it) I'll resubmit it properly.
> >
> > Thanks,
> > Stratos
> >
> > > Thanks,
> > >
> > > Fam
> > >
> > >> After some investigation, we traced it down to the monitor_flush()
> > >> function in monitor.c. Specifically, when a second client connects to
> > >> the qmp (client B), while another one is already using it (client A), we
> > >> get the following from stracing the second client (client B):
> > >>
> > >> connect(3, {sa_family=AF_FILE, path="foo.mon"}, 9) = 0
> > >> getsockname(3, {sa_family=AF_FILE, NULL}, [2]) = 0
> > >> select(4, [0 3], [1 3], [], NULL) = 2 (out [1 3])
> > >> select(4, [0 3], [], [], NULL
> > >>
> > >> So, the connect() syscall from client B succeeds, although client B
> > >> connection has not yet been accepted by the qmp server (it's still in
> > >> the backlog of the qmp listening socket).
> > >>
> > >> After killing client B and then client A, we see the following when
> > >> stracing the qemu proc:
> > >>
> > >> 22363 accept4(6, {sa_family=AF_FILE, NULL}, [2], SOCK_CLOEXEC) = 9
> > >> 22363 fcntl(9, F_GETFL) = 0x2 (flags O_RDWR)
> > >> 22363 fcntl(9, F_SETFL, O_RDWR|O_NONBLOCK) = 0
> > >> 22363 fstat(9, {st_mode=S_IFSOCK|0777, st_size=0, ...}) = 0
> > >> 22363 fcntl(9, F_GETFL) = 0x802 (flags
> > >> O_RDWR|O_NONBLOCK)
> > >> 22363 write(9, "{\"QMP\": {\"version\": {\"qemu\": {\"m"..., 127) =
> > >> -1 EPIPE (Broken pipe)
> > >> 22363 --- SIGPIPE (Broken pipe) @ 0 (0) ---
> > >>
> > >> The qmp server / qemu accepts the connection from client B (who has now
> > >> closed the connection) and tries to write the greeting message to the
> > >> socket fd. This results in write returning an error (EPIPE).
> > >>
> > >> The monitor_flush() function doesn't seem to handle this case (write
> > >> error). Instead, it adds a watch / handler to retry the write operation.
> > >> Thus, mon->outbuf is not cleaned up properly, which results in duplicate
> > >> greeting messages for the next client to connect.
> > >>
> > >> The following seems to do the trick.
> > >>
> > >> diff --git a/monitor.c b/monitor.c
> > >> index 845f608..5622f20 100644
> > >> --- a/monitor.c
> > >> +++ b/monitor.c
> > >> @@ -288,8 +288,8 @@ void monitor_flush(Monitor *mon)
> > >>
> > >> if (len && !mon->mux_out) {
> > >> rc = qemu_chr_fe_write(mon->chr, (const uint8_t *) buf, len);
> > >> - if (rc == len) {
> > >> - /* all flushed */
> > >> + if ((rc < 0 && errno != EAGAIN) || (rc == len)) {
> > >> + /* all flushed or error */
> > >> QDECREF(mon->outbuf);
> > >> mon->outbuf = qstring_new();
> > >> return;
> > >>
> > >> Comments?
> > >>
> > >> Thanks,
> > >> Stratos
> > >>
> > >> --
> > >> Stratos Psomadakis
> > >> <pso...@grnet.gr>
> > >>
> > >
> >
> >
> > --
> > Stratos Psomadakis
> > <pso...@grnet.gr>
> >
> >
>
>
