On Sun, Sep 15, 2013 at 02:29:34PM +0300, Claudiu Tanaselia wrote: > I have little to none experience in compiling stuff under OpenBSD. After > getting the xenocara source, I've followed the README and now I'm currently > at 'make build' step, though I'm confused about where and how should I use > 'env > CFLAGS=-g make -f Makefile.bsd-wrapper build' for debugging > information.
Start by running this in the xserver directory, to get debugging symbols for the main server code. You can also rebuild driver/xf86-video-r128 this way to get symbols for the r128 driver. But maybe, before you do that, send us the full /var/log/Xorg.0.log for the machine when you start X without an /etc/X11/xorg.conf file. The file you sent below is clearly incomplete. It misses information about the xorg.conf file used, or about modules loaded. I don't know why/how some lines got removed, but they may contain the explanation for the error you're seeing. FYI I've appended the log file I get on a similar machine (not exactly the same r128 chipset though), where X is running fine. Afaict the difference in chipset is not enough to explain the error you're seeing. > > > > > > Here's the Xorg.0.log for -current: > > > > > > # cat /var/log/Xorg.0.log > > > > > > [ 103.342] > > > X.Org X Server 1.14.2 > > > Release Date: 2013-06-25 > > > [ 103.373] X Protocol Version 11, Revision 0 > > > [ 103.388] Build Operating System: OpenBSD 5.4 macppc > > > [ 103.403] Current Operating System: OpenBSD cronos.my.domain 5.4 > > > GENERIC#43 macppc > > > [ 103.421] Build Date: 13 September 2013 12:42:45AM > > > [ 103.435] > > > [ 103.450] Current version of pixman: 0.30.2 > > > [ 103.465] Before reporting problems, check http://wiki.x.org > > > to make sure that you have the latest version. > > > [ 103.465] Markers: (--) probed, (**) from config file, (==) default > > > setting, > > > (++) from command line, (!!) notice, (II) informational, > > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > > [ 103.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 15 > > > 10:38:31 2013 > > > [ 103.539] (II) Loader magic: 0x1a1b580 > > > [ 103.539] (II) Module ABI versions: > > > [ 103.539] X.Org ANSI C Emulation: 0.4 > > > [ 103.539] X.Org Video Driver: 14.1 > > > [ 103.539] X.Org XInput driver : 19.1 > > > [ 103.539] X.Org Server Extension : 7.0 > > > [ 104.029] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility > > > mode (version 3.32) > > > [ 104.081] (--) PCI:*(0:0:16:0) 1002:5052:1002:5052 rev 0, Mem @ > > > 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ > > > 0x????????/131072 > > > [ 104.157] (EE) Segmentation fault at address 0x0 > > > [ 104.158] (EE) > > > Fatal server error: > > > [ 104.158] (EE) Caught signal 11 (Segmentation fault). Server aborting > > > [ 104.158] (EE) > > > [ 104.158] (EE) > > > Please consult the The X.Org Foundation support > > > at http://wiki.x.org > > > for help. > > > [ 104.159] (EE) Please also check the log file at "/var/log/Xorg.0.log" > > > for additional information. > > > [ 104.159] (EE) > > > [ 104.193] (EE) Server terminated with error (1). Closing log file. > > > [ 391.857] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) [ 391.954] X.Org X Server 1.14.2 Release Date: 2013-06-25 [ 391.955] X Protocol Version 11, Revision 0 [ 391.955] Build Operating System: OpenBSD 5.4 macppc [ 391.956] Current Operating System: OpenBSD pocahontas.herrb.net 5.4 GENERIC#43 macppc [ 391.959] Build Date: 13 September 2013 12:42:45AM [ 391.960] [ 391.960] Current version of pixman: 0.30.2 [ 391.960] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 391.961] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 391.964] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 15 12:16:49 2013 [ 391.968] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 391.969] (==) No Layout section. Using the first Screen section. [ 391.969] (==) No screen section available. Using defaults. [ 391.970] (**) |-->Screen "Default Screen Section" (0) [ 391.970] (**) | |-->Monitor "<default monitor>" [ 391.972] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 391.973] (==) Disabling SIGIO handlers for input devices [ 391.973] (==) Automatically adding devices [ 391.973] (==) Automatically enabling devices [ 391.974] (==) Not automatically adding GPU devices [ 391.975] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 391.975] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 391.975] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 391.976] (II) Loader magic: 0x1a1b580 [ 391.976] (II) Module ABI versions: [ 391.977] X.Org ANSI C Emulation: 0.4 [ 391.977] X.Org Video Driver: 14.1 [ 391.977] X.Org XInput driver : 19.1 [ 391.977] X.Org Server Extension : 7.0 [ 391.983] (--) PCI:*(0:0:16:0) 1002:4c46:1002:4c46 rev 2, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072 [ 391.986] Initializing built-in extension Generic Event Extension [ 391.986] Initializing built-in extension SHAPE [ 391.986] Initializing built-in extension MIT-SHM [ 391.986] Initializing built-in extension XInputExtension [ 391.987] Initializing built-in extension XTEST [ 391.987] Initializing built-in extension BIG-REQUESTS [ 391.988] Initializing built-in extension SYNC [ 391.988] Initializing built-in extension XKEYBOARD [ 391.988] Initializing built-in extension XC-MISC [ 391.988] Initializing built-in extension SECURITY [ 391.989] Initializing built-in extension XINERAMA [ 391.989] Initializing built-in extension XFIXES [ 391.989] Initializing built-in extension RENDER [ 391.990] Initializing built-in extension RANDR [ 391.990] Initializing built-in extension COMPOSITE [ 391.990] Initializing built-in extension DAMAGE [ 391.991] Initializing built-in extension MIT-SCREEN-SAVER [ 391.991] Initializing built-in extension DOUBLE-BUFFER [ 391.991] Initializing built-in extension RECORD [ 391.991] Initializing built-in extension DPMS [ 391.992] Initializing built-in extension X-Resource [ 391.992] Initializing built-in extension XVideo [ 391.992] Initializing built-in extension XVideo-MotionCompensation [ 391.993] Initializing built-in extension XFree86-VidModeExtension [ 391.993] Initializing built-in extension XFree86-DGA [ 391.993] Initializing built-in extension XFree86-DRI [ 391.994] Initializing built-in extension DRI2 [ 391.994] (II) LoadModule: "glx" [ 391.998] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 392.002] (II) Module glx: vendor="X.Org Foundation" [ 392.002] compiled for 1.14.2, module version = 1.0.0 [ 392.003] ABI class: X.Org Server Extension, version 7.0 [ 392.003] (==) AIGLX enabled [ 392.004] Loading extension GLX [ 392.005] (==) Matched ati as autoconfigured driver 0 [ 392.006] (==) Assigned the driver to the xf86ConfigLayout [ 392.006] (II) LoadModule: "ati" [ 392.009] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so [ 392.012] (II) Module ati: vendor="X.Org Foundation" [ 392.012] compiled for 1.14.2, module version = 7.2.0 [ 392.013] Module class: X.Org Video Driver [ 392.013] ABI class: X.Org Video Driver, version 14.1 [ 392.014] (II) LoadModule: "r128" [ 392.016] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so [ 392.019] (II) Module r128: vendor="X.Org Foundation" [ 392.019] compiled for 1.14.2, module version = 6.9.1 [ 392.020] Module class: X.Org Video Driver [ 392.020] ABI class: X.Org Video Driver, version 14.1 [ 392.021] (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP), ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP), ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP), ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP), ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP), ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP), ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP), ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP), ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP), ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP), ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) [ 392.060] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 392.061] (II) R128(0): PCI bus 0 card 16 func 0 [ 392.062] (II) R128(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 392.062] (==) R128(0): Depth 24, (--) framebuffer bpp 32 [ 392.063] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 392.063] (==) R128(0): Default visual is TrueColor [ 392.064] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped [ 392.065] (==) R128(0): RGB weight 888 [ 392.065] (II) R128(0): Using 8 bits per RGB (8 bit DAC) [ 392.066] (--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46) [ 392.066] (--) R128(0): Linear framebuffer at 0x94000000 [ 392.066] (--) R128(0): MMIO registers at 0x90000000 [ 392.067] (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) [ 392.068] (**) R128(0): Using flat panel for display [ 392.069] (WW) R128(0): Failed to read PCI ROM! [ 392.069] (WW) R128(0): Video BIOS not found! [ 392.070] (II) R128(0): Primary Display == Type 2 [ 392.070] (WW) R128(0): Can't determine panel dimensions, and none specified. Disabling programming of FP registers. [ 392.071] (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=10500 [ 392.071] (II) Loading sub module "ddc" [ 392.072] (II) LoadModule: "ddc" [ 392.072] (II) Module "ddc" already built-in [ 392.073] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) [ 392.073] (II) R128(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz [ 392.074] (II) R128(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz [ 392.074] (II) R128(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz [ 392.074] (WW) R128(0): Unable to estimate virtual size [ 392.075] (II) R128(0): Clock range: 12.50 to 250.00 MHz [ 392.075] (II) R128(0): Not using default mode "640x350" (vrefresh out of range) [ 392.075] (II) R128(0): Not using default mode "320x175" (doublescan mode not supported) [ 392.076] (II) R128(0): Not using default mode "640x400" (vrefresh out of range) [ 392.076] (II) R128(0): Not using default mode "320x200" (doublescan mode not supported) [ 392.076] (II) R128(0): Not using default mode "720x400" (vrefresh out of range) [ 392.077] (II) R128(0): Not using default mode "360x200" (doublescan mode not supported) [ 392.077] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported) [ 392.077] (II) R128(0): Not using default mode "640x480" (vrefresh out of range) [ 392.078] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported) [ 392.078] (II) R128(0): Not using default mode "640x480" (vrefresh out of range) [ 392.079] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported) [ 392.079] (II) R128(0): Not using default mode "640x480" (vrefresh out of range) [ 392.079] (II) R128(0): Not using default mode "320x240" (doublescan mode not supported) [ 392.080] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported) [ 392.080] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported) [ 392.080] (II) R128(0): Not using default mode "800x600" (vrefresh out of range) [ 392.081] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported) [ 392.081] (II) R128(0): Not using default mode "800x600" (vrefresh out of range) [ 392.081] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported) [ 392.082] (II) R128(0): Not using default mode "800x600" (hsync out of range) [ 392.082] (II) R128(0): Not using default mode "400x300" (doublescan mode not supported) [ 392.083] (II) R128(0): Not using default mode "1024x768i" (interlace mode not supported) [ 392.083] (II) R128(0): Not using default mode "512x384i" (interlace mode not supported) [ 392.083] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported) [ 392.084] (II) R128(0): Not using default mode "1024x768" (hsync out of range) [ 392.084] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported) [ 392.084] (II) R128(0): Not using default mode "1024x768" (hsync out of range) [ 392.085] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported) [ 392.085] (II) R128(0): Not using default mode "1024x768" (hsync out of range) [ 392.086] (II) R128(0): Not using default mode "512x384" (doublescan mode not supported) [ 392.086] (II) R128(0): Not using default mode "1152x864" (hsync out of range) [ 392.086] (II) R128(0): Not using default mode "576x432" (doublescan mode not supported) [ 392.087] (II) R128(0): Not using default mode "1280x960" (hsync out of range) [ 392.087] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported) [ 392.087] (II) R128(0): Not using default mode "1280x960" (hsync out of range) [ 392.088] (II) R128(0): Not using default mode "640x480" (doublescan mode not supported) [ 392.088] (II) R128(0): Not using default mode "1280x1024" (hsync out of range) [ 392.088] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported) [ 392.089] (II) R128(0): Not using default mode "1280x1024" (hsync out of range) [ 392.089] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported) [ 392.089] (II) R128(0): Not using default mode "1280x1024" (hsync out of range) [ 392.090] (II) R128(0): Not using default mode "640x512" (doublescan mode not supported) [ 392.090] (II) R128(0): Not using default mode "1600x1200" (hsync out of range) [ 392.090] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported) [ 392.091] (II) R128(0): Not using default mode "1600x1200" (hsync out of range) [ 392.091] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported) [ 392.092] (II) R128(0): Not using default mode "1600x1200" (hsync out of range) [ 392.092] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported) [ 392.092] (II) R128(0): Not using default mode "1600x1200" (hsync out of range) [ 392.093] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported) [ 392.093] (II) R128(0): Not using default mode "1600x1200" (hsync out of range) [ 392.093] (II) R128(0): Not using default mode "800x600" (doublescan mode not supported) [ 392.094] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode) [ 392.094] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported) [ 392.094] (II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode) [ 392.095] (II) R128(0): Not using default mode "896x672" (doublescan mode not supported) [ 392.095] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode) [ 392.095] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported) [ 392.096] (II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode) [ 392.096] (II) R128(0): Not using default mode "928x696" (doublescan mode not supported) [ 392.096] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 392.097] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported) [ 392.097] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 392.097] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported) [ 392.098] (II) R128(0): Not using default mode "832x624" (hsync out of range) [ 392.098] (II) R128(0): Not using default mode "416x312" (doublescan mode not supported) [ 392.098] (II) R128(0): Not using default mode "1400x1050" (hsync out of range) [ 392.099] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported) [ 392.099] (II) R128(0): Not using default mode "1400x1050" (hsync out of range) [ 392.100] (II) R128(0): Not using default mode "700x525" (doublescan mode not supported) [ 392.100] (II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 392.100] (II) R128(0): Not using default mode "960x720" (doublescan mode not supported) [ 392.101] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 392.101] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported) [ 392.102] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 392.102] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported) [ 392.102] (II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 392.103] (II) R128(0): Not using default mode "1024x768" (doublescan mode not supported) [ 392.103] (--) R128(0): Virtual size is 1024x768 (pitch 1024) [ 392.104] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz [ 392.104] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd) [ 392.104] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [ 392.105] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd) [ 392.106] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz [ 392.107] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd) [ 392.107] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz [ 392.107] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd) [ 392.108] (==) R128(0): DPI set to (96, 96) [ 392.109] (II) Loading sub module "fb" [ 392.109] (II) LoadModule: "fb" [ 392.115] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 392.119] (II) Module fb: vendor="X.Org Foundation" [ 392.119] compiled for 1.14.2, module version = 1.0.0 [ 392.120] ABI class: X.Org ANSI C Emulation, version 0.4 [ 392.120] (II) Loading sub module "ramdac" [ 392.121] (II) LoadModule: "ramdac" [ 392.121] (II) Module "ramdac" already built-in [ 392.122] (II) Loading sub module "shadowfb" [ 392.122] (II) LoadModule: "shadowfb" [ 392.128] (II) Loading /usr/X11R6/lib/modules/libshadowfb.so [ 392.132] (II) Module shadowfb: vendor="X.Org Foundation" [ 392.133] compiled for 1.14.2, module version = 1.0.0 [ 392.133] ABI class: X.Org ANSI C Emulation, version 0.4 [ 392.134] (II) R128(0): Page flipping disabled [ 392.134] (!!) R128(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. [ 392.135] (--) Depth 24 pixmap format is 32 bpp [ 392.136] (II) R128(0): Acceleration of RENDER operations will be enabledupon successful loading of DRI and EXA [ 392.151] (WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory [ 392.153] (II) R128(0): Filling in EXA memory info [ 392.153] (II) R128(0): Loading EXA module... [ 392.154] (II) Loading sub module "exa" [ 392.154] (II) LoadModule: "exa" [ 392.160] (II) Loading /usr/X11R6/lib/modules/libexa.so [ 392.162] (II) Module exa: vendor="X.Org Foundation" [ 392.163] compiled for 1.14.2, module version = 2.6.0 [ 392.163] ABI class: X.Org Video Driver, version 14.1 [ 392.164] (II) R128(0): Allocating EXA driver... [ 392.164] (II) R128(0): Acceleration enabled [ 392.164] (II) R128(0): Filled in offs [ 392.165] (II) R128(0): Going to init EXA... [ 392.165] (II) R128(0): Setting up EXA callbacks [ 392.165] (II) R128(0): Initalizing 2D acceleration engine... [ 392.165] (II) R128(0): Initializing EXA driver... [ 392.166] (II) EXA(0): Offscreen pixmap area of 5242880 bytes [ 392.167] (II) EXA(0): Driver registered support for the following operations: [ 392.167] (II) Solid [ 392.167] (II) Copy [ 392.168] (II) R128(0): EXA Acceleration enabled [ 392.168] (==) R128(0): Backing store disabled [ 392.169] (==) R128(0): Silken mouse disabled [ 392.170] (II) R128(0): Using hardware cursor (scanline 8190) [ 392.172] (==) R128(0): DPMS enabled [ 392.173] (WW) R128(0): Direct rendering disabled [ 392.173] (==) RandR enabled [ 392.235] (II) AIGLX: Screen 0 is not DRI2 capable [ 392.235] (II) AIGLX: Screen 0 is not DRI capable [ 392.302] (II) AIGLX: Loaded and initialized swrast [ 392.302] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 393.943] (II) config/wscons: checking input device /dev/wskbd [ 393.944] (II) wskbd: using layout us [ 393.944] (II) wskbd: using model macintosh [ 393.945] (II) LoadModule: "kbd" [ 393.949] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 393.952] (II) Module kbd: vendor="X.Org Foundation" [ 393.952] compiled for 1.14.2, module version = 1.7.0 [ 393.953] Module class: X.Org XInput Driver [ 393.953] ABI class: X.Org XInput driver, version 19.1 [ 393.954] (II) Using input driver 'kbd' for '/dev/wskbd' [ 393.954] (**) /dev/wskbd: always reports core events [ 393.955] (**) /dev/wskbd: always reports core events [ 393.956] (**) Option "Protocol" "standard" [ 393.957] (**) Option "XkbRules" "base" [ 393.957] (**) Option "XkbModel" "macintosh" [ 393.958] (**) Option "XkbLayout" "us" [ 393.960] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 394.215] (II) config/wscons: checking input device /dev/wsmouse [ 394.215] (II) LoadModule: "ws" [ 394.220] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 394.222] (II) Module ws: vendor="X.Org Foundation" [ 394.223] compiled for 1.14.2, module version = 1.3.0 [ 394.223] Module class: X.Org XInput Driver [ 394.224] ABI class: X.Org XInput driver, version 19.1 [ 394.224] (II) Using input driver 'ws' for '/dev/wsmouse' [ 394.225] (**) /dev/wsmouse: always reports core events [ 394.225] (II) ws: /dev/wsmouse: debuglevel 0 [ 394.226] (**) Option "Device" "/dev/wsmouse" [ 394.227] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 394.227] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 394.227] (**) ws: /dev/wsmouse: associated screen: 0 [ 394.230] (II) ws: /dev/wsmouse: minimum x position: 0 [ 394.230] (II) ws: /dev/wsmouse: maximum x position: 1023 [ 394.231] (II) ws: /dev/wsmouse: minimum y position: 0 [ 394.231] (II) ws: /dev/wsmouse: maximum y position: 767 [ 394.231] (==) ws: /dev/wsmouse: Buttons: 7 [ 394.232] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 394.233] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7) [ 394.235] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 394.236] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 394.236] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 394.236] (**) /dev/wsmouse: (accel) acceleration threshold: 4 -- Matthieu Herrb
