I have little to none experience in compiling stuff under OpenBSD. After getting the xenocara source, I've followed the README and now I'm currently at 'make build' step, though I'm confused about where and how should I use 'env CFLAGS=-g make -f Makefile.bsd-wrapper build' for debugging information.
On Sun, Sep 15, 2013 at 11:26 AM, Matthieu Herrb <matthieu.he...@laas.fr>wrote: > On Sun, Sep 15, 2013 at 10:55:20AM +0300, Claudiu Tanaselia wrote: > > Hi, > > > > I've installed OpenBSD 5.3 and -current on an iMac G3 (summer 2000 model) > > and I get the same behaviour while trying to run or configure X > > (unsuccessfully). Yes, 'machdep.allowaperture' is set to '2' > > on /etc/sysctl.conf. > > > > 'startx' would give me a black screen, no mouse cursor. > Ctrl-Alt-Backspace > > would kill X and return to console. > > > > Running 'X -configure' as root hangs the machine: ctrl-alt-backspace has > no > > effect. Ctrl+C would display ^C character on the screen, but that's it, > > nothing more. On 5.3, it would hang on line '(==) Log file: > > "/var/log/Xorg.0.log", Time: Sun Sep 15 10:38:31 2013' and on -current it > > shows just a black screen. I have to ssh into it for a proper > > reboot. > > Hi, > > This is strange, this model should just work, without the need of a > configuration file. > > can you try to build an X server with debugging information and get a > backtrace, following the instructions in /usr/xenocara/README ? > > > > > Here's the Xorg.0.log for -current: > > > > # cat /var/log/Xorg.0.log > > > > [ 103.342] > > X.Org X Server 1.14.2 > > Release Date: 2013-06-25 > > [ 103.373] X Protocol Version 11, Revision 0 > > [ 103.388] Build Operating System: OpenBSD 5.4 macppc > > [ 103.403] Current Operating System: OpenBSD cronos.my.domain 5.4 > > GENERIC#43 macppc > > [ 103.421] Build Date: 13 September 2013 12:42:45AM > > [ 103.435] > > [ 103.450] Current version of pixman: 0.30.2 > > [ 103.465] Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > [ 103.465] Markers: (--) probed, (**) from config file, (==) default > > setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > [ 103.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 15 > > 10:38:31 2013 > > [ 103.539] (II) Loader magic: 0x1a1b580 > > [ 103.539] (II) Module ABI versions: > > [ 103.539] X.Org ANSI C Emulation: 0.4 > > [ 103.539] X.Org Video Driver: 14.1 > > [ 103.539] X.Org XInput driver : 19.1 > > [ 103.539] X.Org Server Extension : 7.0 > > [ 104.029] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility > > mode (version 3.32) > > [ 104.081] (--) PCI:*(0:0:16:0) 1002:5052:1002:5052 rev 0, Mem @ > > 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ > > 0x????????/131072 > > [ 104.157] (EE) Segmentation fault at address 0x0 > > [ 104.158] (EE) > > Fatal server error: > > [ 104.158] (EE) Caught signal 11 (Segmentation fault). Server aborting > > [ 104.158] (EE) > > [ 104.158] (EE) > > Please consult the The X.Org Foundation support > > at http://wiki.x.org > > for help. > > [ 104.159] (EE) Please also check the log file at "/var/log/Xorg.0.log" > > for additional information. > > [ 104.159] (EE) > > [ 104.193] (EE) Server terminated with error (1). Closing log file. > > > > And here's dmesg output: > > > > [ using 549656 bytes of bsd ELF symbol table ] > > console out [ATY,Rage128Pk]console in [keyboard] , using USB > > : memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, > > size 20000: width 1024 linebytes 1024 height 768 depth 8 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights > reserved. > > Copyright (c) 1995-2013 OpenBSD. All rights reserved. > > http://www.OpenBSD.org > > > > OpenBSD 5.4-current (GENERIC) #43: Fri Sep 13 03:15:19 MDT 2013 > > t...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC > > real mem = 268435456 (256MB) > > avail mem = 246091776 (234MB) > > mainbus0 at root: model PowerMac2,2 > > cpu0 at mainbus0: 750 (Revision 0x8300): 400 MHz: 512KB backside cache > > mem0 at mainbus0 > > spdmem0 at mem0: 128MB SDRAM non-parity PC133CL3 > > spdmem1 at mem0: 128MB SDRAM non-parity PC100CL2 > > memc0 at mainbus0: uni-n rev 0x8 > > kiic0 at memc0 offset 0xf8001000 > > iic0 at kiic0 > > mpcpcibr0 at mainbus0 pci: uni-north > > pci0 at mpcpcibr0 bus 0 > > pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00 > > vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio > > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > mpcpcibr1 at mainbus0 pci: uni-north > > pci1 at mpcpcibr1 bus 0 > > macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03 > > openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE > > macgpio0 at macobio0 offset 0x50 > > macgpio1 at macgpio0: irq 47 > > pgs0 at macgpio0: irq 55 > > "escc-legacy" at macobio0 offset 0x12000 not configured > > zsc0 at macobio0 offset 0x13000: irq 22,50 > > zstty0 at zsc0 channel 0 > > zstty1 at zsc0 channel 1 > > awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker > > audio0 at awacs0 > > "timer" at macobio0 offset 0x15000 not configured > > adb0 at macobio0 offset 0x16000 > > apm0 at adb0: battery flags 0x9, 0% charged > > kiic1 at macobio0 offset 0x18000 > > iic1 at kiic1 > > wdc0 at macobio0 offset 0x1f000 irq 19: DMA > > wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 10> > > wd0: 16-sector PIO, LBA, 9736MB, 19941264 sectors > > atapiscsi0 at wdc0 channel 0 drive 1 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-1750, 0A0C> ATAPI > > 5/cdrom removable > > wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 > > cd0(wdc0:0:1): using PIO mode 4, DMA mode 2 > > wdc1 at macobio0 offset 0x20000 irq 20: DMA > > wdc2 at macobio0 offset 0x21000 irq 21: DMA > > ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0 > > ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0 > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > > usb1 at ohci1: USB revision 1.0 > > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > > mpcpcibr2 at mainbus0 pci: uni-north > > pci2 at mpcpcibr2 bus 0 > > "Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not > configured > > gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, > address > > 00:30:65:6d:ed:3c > > bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2 > > uhub2 at uhub1 port 1 "NEC hub" rev 1.00/1.00 addr 2 > > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Alps Electric M2452" > > rev 1.00/1.01 addr 3 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13 > > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > uhidev1 at uhub2 port 3 configuration 1 interface 0 "Fujitsu Takamisawa > > Component Apple Optical USB Mouse" rev 1.10/1.06 addr 4 > > uhidev1: iclass 3/1 > > ums0 at uhidev1: 1 button > > wsmouse0 at ums0 mux 0 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd > > root on wd0a (33b1eec0ce3de68d.a) swap on wd0b dump on wd0b > > syncing disks... > > [ using 549656 bytes of bsd ELF symbol table ] > > console out [ATY,Rage128Pk]console in [keyboard] , using USB > > : memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, > > size 20000: width 1024 linebytes 1024 height 768 depth 8 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights > reserved. > > Copyright (c) 1995-2013 OpenBSD. All rights reserved. > > http://www.OpenBSD.org > > > > OpenBSD 5.4-current (GENERIC) #43: Fri Sep 13 03:15:19 MDT 2013 > > t...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC > > real mem = 268435456 (256MB) > > avail mem = 246091776 (234MB) > > mainbus0 at root: model PowerMac2,2 > > cpu0 at mainbus0: 750 (Revision 0x8300): 400 MHz: 512KB backside cache > > mem0 at mainbus0 > > spdmem0 at mem0: 128MB SDRAM non-parity PC133CL3 > > spdmem1 at mem0: 128MB SDRAM non-parity PC100CL2 > > memc0 at mainbus0: uni-n rev 0x8 > > kiic0 at memc0 offset 0xf8001000 > > iic0 at kiic0 > > mpcpcibr0 at mainbus0 pci: uni-north > > pci0 at mpcpcibr0 bus 0 > > pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00 > > vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio > > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > mpcpcibr1 at mainbus0 pci: uni-north > > pci1 at mpcpcibr1 bus 0 > > macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03 > > openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE > > macgpio0 at macobio0 offset 0x50 > > macgpio1 at macgpio0: irq 47 > > pgs0 at macgpio0: irq 55 > > "escc-legacy" at macobio0 offset 0x12000 not configured > > zsc0 at macobio0 offset 0x13000: irq 22,50 > > zstty0 at zsc0 channel 0 > > zstty1 at zsc0 channel 1 > > awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker > > audio0 at awacs0 > > "timer" at macobio0 offset 0x15000 not configured > > adb0 at macobio0 offset 0x16000 > > apm0 at adb0: battery flags 0x9, 0% charged > > kiic1 at macobio0 offset 0x18000 > > iic1 at kiic1 > > wdc0 at macobio0 offset 0x1f000 irq 19: DMA > > wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 10> > > wd0: 16-sector PIO, LBA, 9736MB, 19941264 sectors > > atapiscsi0 at wdc0 channel 0 drive 1 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-1750, 0A0C> ATAPI > > 5/cdrom removable > > wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 > > cd0(wdc0:0:1): using PIO mode 4, DMA mode 2 > > wdc1 at macobio0 offset 0x20000 irq 20: DMA > > wdc2 at macobio0 offset 0x21000 irq 21: DMA > > ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0 > > ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0 > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > > usb1 at ohci1: USB revision 1.0 > > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > > mpcpcibr2 at mainbus0 pci: uni-north > > pci2 at mpcpcibr2 bus 0 > > "Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not > configured > > gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, > address > > 00:30:65:6d:ed:3c > > bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2 > > uhub2 at uhub1 port 1 "NEC hub" rev 1.00/1.00 addr 2 > > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Alps Electric M2452" > > rev 1.00/1.01 addr 3 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13 > > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > > uhidev1 at uhub2 port 3 configuration 1 interface 0 "Fujitsu Takamisawa > > Component Apple Optical USB Mouse" rev 1.10/1.06 addr 4 > > uhidev1: iclass 3/1 > > ums0 at uhidev1: 1 button > > wsmouse0 at ums0 mux 0 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd > > root on wd0a (33b1eec0ce3de68d.a) swap on wd0b dump on wd0b > > > > Claudiu. > > > > -- > Matthieu Herrb
