You could also do it yourself with a continuity meter and an insulation resistance meter if you like. This is how we have to do bigger 3 phase machinery regardless. Regards Gary
-----Original Message----- From: Andy Taylor <andy...@gmail.com> Sender: peterboro-boun...@mailman.lug.org.uk Date: Tue, 3 Jul 2012 10:22:19 To: Peterborough LUG - No commercial posts<peterboro@mailman.lug.org.uk> Reply-To: Peterborough LUG - No commercial posts <peterboro@mailman.lug.org.uk> Subject: Re: [Peterboro] OT- PAT Testing On 3 July 2012 10:17, Tony Cowderoy <t...@cowderoy.co.uk> wrote: > On 03/07/2012 09:46, Mark Rogers wrote: >> If you can find someone to lend you the test kit, doing the tests is >> quite simple (you don't need to be qualified). >> >> We may have test kit here, I'll see if I can find it. >> > That would be brilliant. I need to get this done by Monday am. Is that > likely to be possible or is it asking too much? > > I assume that I can find a description of the tests/inspections on the > web somewhere. Where can I get suitable stickers/paperwork from? > > Would I count as "competent person"? I'm not an electrician but I do > have an engineering degree and trained as an engineer in the aircraft > industry (although that's several decades ago). I also ran an vehicle > design and development team in the '80s. > > Tony Cowderoy Hi Tony, I have a test document we use when doing retro computer displays. I will send a copy of it directly to you, and you can modify as you see fit. Andy _______________________________________________ Peterboro mailing list Peterboro@mailman.lug.org.uk https://mailman.lug.org.uk/mailman/listinfo/peterboro _______________________________________________ Peterboro mailing list Peterboro@mailman.lug.org.uk https://mailman.lug.org.uk/mailman/listinfo/peterboro
