Hi, Good info,
Can you suggest a good little pre-amp that would work well with my JVC turn table? BTW: How is Groove Mechanic for accessibility? Cheers...Keith ----- Original Message ----- From: "John J. Jacques" <[EMAIL PROTECTED]> To: <pc-audio@pc-audio.org> Sent: Tuesday, January 09, 2007 5:42 AM Subject: Re: Devices for Recording LP's and 45's to Digital Hi all, the easiest way to do this, is if you have a turntable that you can set up close to your computer! You can either get an inexpensive pre-amp that will boost the low level of a magnetic phono cartridge and equalize it correctly and feed the output of that pre-amp to the line input of your sound card! Then, all you need is a sound editing program, such as Gold Wave, or Groove Mechanic wich is designed for recording vinyl! An alternative solution, if there is no way to get a turntable in the same area as the PC, is if you already have a fairly good quality stereo system, with a turntable and a cassette deck, you can first record the vinyl LP's on to a good quality cassette and then, plug a cassette deck into your PC's sound card and record that way! Since I have my stereo system set up right here along with my computers, I just feed my main pc's second sound card into the tape monitor loop of my reciever, so I can record anything that I wish onto the hard drive! HTH: J. J. John Jacques Amateur Radio Station: KG7FA "Where Cat Is, Is Civilization!" Check Out My Web Page At: www.myspace.com/johnjacquesmusic Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
