Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
> On Behalf Of Paul Fertser
> Sent: Dienstag, 5. Oktober 2021 21:40
> To: openwrt-devel@lists.openwrt.org
> Cc: Paul Fertser <fercer...@gmail.com>
> Subject: [RFT 5/5] realtek: support Trendnet TPE-082WS V1
> 
> According to photos and specs for Trendnet TPE-082WS V1.2R it should be
> the same as D-Link DGS-1210-10P R1 but with more powerful PSU (90 W) so
> the PoE budget is specified as 75 W.

This should be properly sorted in image/Makefile.

Best

Adian

> 
> Signed-off-by: Paul Fertser <fercer...@gmail.com>
> ---
>  .../realtek/base-files/etc/board.d/02_network |  3 +
>  .../rtl8380_trendnet_tpe-082ws-v1.dts         | 67 +++++++++++++++++++
>  target/linux/realtek/image/Makefile           | 11 +++
>  3 files changed, 81 insertions(+)
>  create mode 100644 target/linux/realtek/dts-5.10/rtl8380_trendnet_tpe-
> 082ws-v1.dts
> 
> diff --git a/target/linux/realtek/base-files/etc/board.d/02_network
> b/target/linux/realtek/base-files/etc/board.d/02_network
> index e7c45de92328..f8e06aea3510 100644
> --- a/target/linux/realtek/base-files/etc/board.d/02_network
> +++ b/target/linux/realtek/base-files/etc/board.d/02_network
> @@ -61,6 +61,9 @@ netgear,gs110tpp-v1)
>  netgear,gs310tp-v1)
>       ucidef_set_poe 55 "$lan_list"
>       ;;
> +trendnet,tpe-082ws-v1)
> +     ucidef_set_poe 75 "$lan_list"
> +     ;;
>  zyxel,gs1900-10hp)
>       ucidef_set_poe 77 "$lan_list"
>       ;;
> diff --git a/target/linux/realtek/dts-5.10/rtl8380_trendnet_tpe-082ws-v1.dts
> b/target/linux/realtek/dts-5.10/rtl8380_trendnet_tpe-082ws-v1.dts
> new file mode 100644
> index 000000000000..9b61da7ffccf
> --- /dev/null
> +++ b/target/linux/realtek/dts-5.10/rtl8380_trendnet_tpe-082ws-v1.dts
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "rtl8380_d-link_dgs-1210-10.dtsi"
> +
> +/ {
> +     compatible = "trendnet,tpe-082ws-v1", "realtek,rtl838x-soc";
> +     model = "Trendnet TPE-082WS V1";
> +
> +     memory@0 {
> +             device_type = "memory";
> +             reg = <0x0 0x10000000>;
> +     };
> +};
> +
> +&spi0 {
> +     status = "okay";
> +
> +     flash@0 {
> +             compatible = "jedec,spi-nor";
> +             reg = <0>;
> +             spi-max-frequency = <50000000>;
> +
> +             partitions {
> +                     compatible = "fixed-partitions";
> +                     #address-cells = <1>;
> +                     #size-cells = <1>;
> +
> +                     partition@0 {
> +                             label = "u-boot";
> +                             reg = <0x00000000 0x0080000>;
> +                             read-only;
> +                     };
> +
> +                     partition@80000 {
> +                             label = "u-boot-env";
> +                             reg = <0x00080000 0x0040000>;
> +                             read-only;
> +                     };
> +
> +                     partition@c0000 {
> +                             label = "u-boot-env2";
> +                             reg = <0x000c0000 0x0040000>;
> +                     };
> +
> +                     partition@100000 {
> +                             label = "firmware";
> +                             compatible = "denx,uimage";
> +                             reg = <0x00100000 0x0e80000>;
> +                     };
> +
> +                     partition@f80000 {
> +                             label = "kernel2";
> +                             reg = <0x00f80000 0x0180000>;
> +                     };
> +
> +                     partition@1100000 {
> +                             label = "rootfs2";
> +                             reg = <0x01100000 0x0d00000>;
> +                     };
> +
> +                     partition@1e00000 {
> +                             label = "jffs2";
> +                             reg = <0x01e00000 0x0200000>;
> +                     };
> +             };
> +     };
> +};
> diff --git a/target/linux/realtek/image/Makefile
> b/target/linux/realtek/image/Makefile
> index c7238494606e..94f4d91a089a 100644
> --- a/target/linux/realtek/image/Makefile
> +++ b/target/linux/realtek/image/Makefile
> @@ -80,6 +80,17 @@ define Device/d-link_dgs-1210-10p-r1  endef
> TARGET_DEVICES += d-link_dgs-1210-10p-r1
> 
> +define Device/trendnet_tpe-082ws-v1
> +  SOC := rtl8380
> +  IMAGE_SIZE := 14848k
> +  DEVICE_VENDOR := Trendnet
> +  DEVICE_MODEL := TPE-082WS
> +  DEVICE_VARIANT := V1
> +  # TODO
> +  # DEVICE_PACKAGES += realtek-poe
> +endef
> +TARGET_DEVICES += trendnet_tpe-082ws-v1
> +
>  define Device/d-link_dgs-1210-16
>    $(Device/d-link_dgs-1210)
>    DEVICE_MODEL := DGS-1210-16
> --
> 2.17.1
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Attachment: openpgp-digital-signature.asc
Description: PGP signature

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to