Stijn Segers <f...@volatilesystems.org> writes: > Yeah, after filling /etc/fw_sys.config with the right values, it works > here too.
Good to know. Note that the partition currently is marked as read-only in the dts. So you will have to chacnge that or use kmod-mtd-rw if you want to change any variable. Thanks to the stock firmware web gui providing direct control of the "active image", i.e the bootpartition variable, it is possible to switch back and forth between OpenWrt installed in "firmware" and stock installed in "runtime2". So you can manage a "dual-boot" installation without using the console. Bjørn _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
