> On Oct 15, 2020, at 11:32 AM, Daniel Golle <dan...@makrotopia.org> wrote: > > On Thu, Oct 15, 2020 at 11:18:24AM -0600, Philip Prindeville wrote: >> Hi, >> >> I have a WLE600VX card in an APU4 running HEAD as of a week ago. >> >> My /etc/config/wireless file is straightforward: >> >> config wifi-device 'radio0' >> option type 'mac80211' >> option channel '36' >> option hwmode '11a' >> option path 'pci0000:00/0000:00:02.5/0000:05:00.0' >> option htmode 'VHT80' >> option disabled '0' >> >> config wifi-iface 'default_radio0' >> option device 'radio0' >> option network 'lan' >> option mode 'ap' >> option hidden '1' >> option ssid ‘xyzzy' >> option encryption 'psk2+aes' >> option key ‘my-passphrase-here’ >> >> But I’m seeing the following warnings: >> >> Oct 14 18:29:23 OpenWrt2 hostapd: Configuration file: >> /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY >> Oct 14 18:29:23 OpenWrt2 hostapd: Line 16: unknown configuration item >> 'ieee80211ac' >> Oct 14 18:29:23 OpenWrt2 hostapd: Line 17: unknown configuration item >> 'vht_oper_chwidth' >> Oct 14 18:29:23 OpenWrt2 hostapd: Line 18: unknown configuration item >> 'vht_oper_centr_freq_seg0_idx' >> Oct 14 18:29:23 OpenWrt2 hostapd: Line 19: unknown configuration item >> 'vht_capab' >> Oct 14 18:29:23 OpenWrt2 hostapd: 4 errors found in configuration file >> '/var/run/hostapd-phy0.conf' >> Oct 14 18:29:23 OpenWrt2 hostapd: Failed to set up interface with >> /var/run/hostapd-phy0.conf >> Oct 14 18:29:23 OpenWrt2 netifd: radio0 (4034): Command failed: Invalid >> argument >> >> >> On booting. >> >> If I comment out these lines being generated in >> /lib/netifd/wireless/mac80211.sh then WiFi works. >> >> Is anyone else seeing this? >> >> I’m using: >> >> CONFIG_PACKAGE_ath10k-firmware-qca988x-ct-full-htt=y >> CONFIG_PACKAGE_wireless-regdb=y >> CONFIG_PACKAGE_kmod-ath=y >> CONFIG_ATH_USER_REGD=y >> CONFIG_PACKAGE_ATH_DFS=y >> CONFIG_PACKAGE_kmod-ath10k-ct=y >> CONFIG_ATH10K-CT_LEDS=y >> CONFIG_PACKAGE_kmod-cfg80211=y >> CONFIG_PACKAGE_kmod-mac80211=y >> CONFIG_PACKAGE_MAC80211_DEBUGFS=y >> CONFIG_PACKAGE_MAC80211_MESH=y >> CONFIG_PACKAGE_hostapd-common=y >> CONFIG_PACKAGE_hostapd-openssl=y >> CONFIG_PACKAGE_hostapd-utils=y >> CONFIG_DRIVER_11N_SUPPORT=y >> CONFIG_DRIVER_11AC_SUPPORT=y >> CONFIG_DRIVER_11W_SUPPORT=y >> CONFIG_PACKAGE_iw=y >> >> Am I doing anything wrong? >> >> Oh, also, in /etc/config/network, do I need to explicitly add wlan0 to my >> bridge for “lan” or does that happen automatically? > > Looks like CONFIG_DRIVER_11AC_SUPPORT=y isn't really set in the end, > usually it should be auto-selected based on the driver you are using, > ie. kmod-ath10k in your case. Those CONFIG_DRVIVER_* symbols are not > meant to be selected manually. > Are you using an out-of-tree WiFi driver or any changes like that?
I commented out CONFIG_DRIVER_* and reran “make defconfig oldconfig” and those 3 got turned back on. Is there something else I should be doing? And no, not an out-of-tree build… unless it’s using backports and that’s considered out-of-tree? -Philip _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
