Hi,
I have a WLE600VX card in an APU4 running HEAD as of a week ago.
My /etc/config/wireless file is straightforward:
config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'pci0000:00/0000:00:02.5/0000:05:00.0'
option htmode 'VHT80'
option disabled '0'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option hidden '1'
option ssid ‘xyzzy'
option encryption 'psk2+aes'
option key ‘my-passphrase-here’
But I’m seeing the following warnings:
Oct 14 18:29:23 OpenWrt2 hostapd: Configuration file:
/var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Oct 14 18:29:23 OpenWrt2 hostapd: Line 16: unknown configuration item
'ieee80211ac'
Oct 14 18:29:23 OpenWrt2 hostapd: Line 17: unknown configuration item
'vht_oper_chwidth'
Oct 14 18:29:23 OpenWrt2 hostapd: Line 18: unknown configuration item
'vht_oper_centr_freq_seg0_idx'
Oct 14 18:29:23 OpenWrt2 hostapd: Line 19: unknown configuration item
'vht_capab'
Oct 14 18:29:23 OpenWrt2 hostapd: 4 errors found in configuration file
'/var/run/hostapd-phy0.conf'
Oct 14 18:29:23 OpenWrt2 hostapd: Failed to set up interface with
/var/run/hostapd-phy0.conf
Oct 14 18:29:23 OpenWrt2 netifd: radio0 (4034): Command failed: Invalid argument
On booting.
If I comment out these lines being generated in
/lib/netifd/wireless/mac80211.sh then WiFi works.
Is anyone else seeing this?
I’m using:
CONFIG_PACKAGE_ath10k-firmware-qca988x-ct-full-htt=y
CONFIG_PACKAGE_wireless-regdb=y
CONFIG_PACKAGE_kmod-ath=y
CONFIG_ATH_USER_REGD=y
CONFIG_PACKAGE_ATH_DFS=y
CONFIG_PACKAGE_kmod-ath10k-ct=y
CONFIG_ATH10K-CT_LEDS=y
CONFIG_PACKAGE_kmod-cfg80211=y
CONFIG_PACKAGE_kmod-mac80211=y
CONFIG_PACKAGE_MAC80211_DEBUGFS=y
CONFIG_PACKAGE_MAC80211_MESH=y
CONFIG_PACKAGE_hostapd-common=y
CONFIG_PACKAGE_hostapd-openssl=y
CONFIG_PACKAGE_hostapd-utils=y
CONFIG_DRIVER_11N_SUPPORT=y
CONFIG_DRIVER_11AC_SUPPORT=y
CONFIG_DRIVER_11W_SUPPORT=y
CONFIG_PACKAGE_iw=y
Am I doing anything wrong?
Oh, also, in /etc/config/network, do I need to explicitly add wlan0 to my
bridge for “lan” or does that happen automatically?
Thanks,
-Philip
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
