On Thu, Oct 15, 2020 at 11:18:24AM -0600, Philip Prindeville wrote: > Hi, > > I have a WLE600VX card in an APU4 running HEAD as of a week ago. > > My /etc/config/wireless file is straightforward: > > config wifi-device 'radio0' > option type 'mac80211' > option channel '36' > option hwmode '11a' > option path 'pci0000:00/0000:00:02.5/0000:05:00.0' > option htmode 'VHT80' > option disabled '0' > > config wifi-iface 'default_radio0' > option device 'radio0' > option network 'lan' > option mode 'ap' > option hidden '1' > option ssid ‘xyzzy' > option encryption 'psk2+aes' > option key ‘my-passphrase-here’ > > But I’m seeing the following warnings: > > Oct 14 18:29:23 OpenWrt2 hostapd: Configuration file: > /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY > Oct 14 18:29:23 OpenWrt2 hostapd: Line 16: unknown configuration item > 'ieee80211ac' > Oct 14 18:29:23 OpenWrt2 hostapd: Line 17: unknown configuration item > 'vht_oper_chwidth' > Oct 14 18:29:23 OpenWrt2 hostapd: Line 18: unknown configuration item > 'vht_oper_centr_freq_seg0_idx' > Oct 14 18:29:23 OpenWrt2 hostapd: Line 19: unknown configuration item > 'vht_capab' > Oct 14 18:29:23 OpenWrt2 hostapd: 4 errors found in configuration file > '/var/run/hostapd-phy0.conf' > Oct 14 18:29:23 OpenWrt2 hostapd: Failed to set up interface with > /var/run/hostapd-phy0.conf > Oct 14 18:29:23 OpenWrt2 netifd: radio0 (4034): Command failed: Invalid > argument > > > On booting. > > If I comment out these lines being generated in > /lib/netifd/wireless/mac80211.sh then WiFi works. > > Is anyone else seeing this? > > I’m using: > > CONFIG_PACKAGE_ath10k-firmware-qca988x-ct-full-htt=y > CONFIG_PACKAGE_wireless-regdb=y > CONFIG_PACKAGE_kmod-ath=y > CONFIG_ATH_USER_REGD=y > CONFIG_PACKAGE_ATH_DFS=y > CONFIG_PACKAGE_kmod-ath10k-ct=y > CONFIG_ATH10K-CT_LEDS=y > CONFIG_PACKAGE_kmod-cfg80211=y > CONFIG_PACKAGE_kmod-mac80211=y > CONFIG_PACKAGE_MAC80211_DEBUGFS=y > CONFIG_PACKAGE_MAC80211_MESH=y > CONFIG_PACKAGE_hostapd-common=y > CONFIG_PACKAGE_hostapd-openssl=y > CONFIG_PACKAGE_hostapd-utils=y > CONFIG_DRIVER_11N_SUPPORT=y > CONFIG_DRIVER_11AC_SUPPORT=y > CONFIG_DRIVER_11W_SUPPORT=y > CONFIG_PACKAGE_iw=y > > Am I doing anything wrong? > > Oh, also, in /etc/config/network, do I need to explicitly add wlan0 to my > bridge for “lan” or does that happen automatically?
Looks like CONFIG_DRIVER_11AC_SUPPORT=y isn't really set in the end, usually it should be auto-selected based on the driver you are using, ie. kmod-ath10k in your case. Those CONFIG_DRVIVER_* symbols are not meant to be selected manually. Are you using an out-of-tree WiFi driver or any changes like that? _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
