On 28/03/2016 20:26, L. D. Pinney wrote:
>
>
> On Mon, Mar 28, 2016 at 12:34 PM, John Crispin <blo...@openwrt.org
> <mailto:blo...@openwrt.org>> wrote:
>
> lets try to figure out what they changed by comparing the sercomm uboot
> sources of the unit with RTSDK original
>
> AFAICT the source downloaded from Netgear only contains the uboot
> binary and not the source code.
> (WNDR3700v5_boot_v113.bin)
Ok, send them an email and inform them that they are obliged to hand
over the fully patched source code used to build that binary and CC the
gpl-vioaltions mailing list. they have to hand it over its as simple as
that.
John
>
>
> On 28/03/2016 17:58, L. D. Pinney wrote:
> > Sercomm hacked bootloader replaced with my own from :
> https://github.com/gnubee-git/GnuBee-MT7621-uboot.git
> >
> > Relevent files and instructions can be downloaded from :
> https://drive.google.com/open?id=0B0CKglNyN0URM2FhVDBpNkVsRlk
> >
> > Some Devices are 'uncooperative' Reset and WPS switches, and LEDs other
> than power.
> >
> > Radios are still non-functional. (MT7662E and MT7603EN)
> >
> > Device has the single-core MediaTek MT7621S.
> >
> > How should CONFIG_NR_CPUS=2 be set in the kernel config ... most other
> devices will need CPUS=4 ??
>
> i think you can override the cpu count via cmdline try maxcpus=2 ?
>
>
> OK I'll try passing that on the cmdline :)
>
>
>
> >
> > Signed-off-by: L. D. Pinney <ldpin...@gmail.com
> <mailto:ldpin...@gmail.com>>
> >
> > ---
> >
> > target/linux/ramips/base-files/etc/board.d/01_leds | 3 ++
> > target/linux/ramips/base-files/etc/board.d/02_network | 1 +
> > target/linux/ramips/base-files/etc/diag.sh | 1 +
> > target/linux/ramips/base-files/lib/ramips.sh | 3 ++
> > target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 +
> > target/linux/ramips/dts/WNDR3700V5.dts | 122
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > target/linux/ramips/image/Makefile | 7 +++-
> > target/linux/ramips/mt7621/config-4.4 | 2 +-
> > target/linux/ramips/mt7621/profiles/netgear.mk
> <http://netgear.mk> | 17 ++++++++++
> > 9 files changed, 155 insertions(+), 2 deletions(-)
> >
> > diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> b/target/linux/ramips/base-files/etc/board.d/01_leds
> > index 5816e60..a396212 100755
> > --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> > +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> > @@ -264,6 +264,9 @@ whr-600d)
> > wnce2001)
> > set_wifi_led "$board:green:wlan"
> > ;;
> > +wndr3700v5)
> > + ucidef_set_led_default "power" "POWER" "$board:green:power" "0"
> > + ;;
> > wt3020)
> > ucidef_set_led_default "power" "power" "$board:blue:power" "0"
> > ;;
> > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> > index 4b65d36..8c804b2 100755
> > --- a/target/linux/ramips/base-files/etc/board.d/02_network
> > +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> > @@ -81,6 +81,7 @@ ramips_setup_interfaces()
> > whr-300hp2|\
> > whr-600d|\
> > witi|\
> > + wndr3700v5|\
> > wsr-1166|\
> > wsr-600|\
> > wt1520|\
> > diff --git a/target/linux/ramips/base-files/etc/diag.sh
> b/target/linux/ramips/base-files/etc/diag.sh
> > index daa7fb1..2f34aff 100644
> > --- a/target/linux/ramips/base-files/etc/diag.sh
> > +++ b/target/linux/ramips/base-files/etc/diag.sh
> > @@ -26,6 +26,7 @@ get_status_led() {
> > nbg-419n|\
> > pwh2004|\
> > wnce2001|\
> > + wndr3700v5|\
> > x5|\
> > x8|\
> > xdxrn502j)
> > diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> > index 5f1df7b..e67ac8d 100755
> > --- a/target/linux/ramips/base-files/lib/ramips.sh
> > +++ b/target/linux/ramips/base-files/lib/ramips.sh
> > @@ -454,6 +454,9 @@ ramips_board_detect() {
> > *"WNCE2001")
> > name="wnce2001"
> > ;;
> > + *"WNDR3700v5")
> > + name="wndr3700v5"
> > + ;;
> > *"WR512-3GN-like"*)
> > name="wr512-3gn"
> > ;;
> > diff --git
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > index c329dce..db9d7de 100755
> > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > @@ -133,6 +133,7 @@ platform_check_image() {
> > wli-tx4-ag300n|\
> > wmr-300|\
> > wnce2001|\
> > + wndr3700v5|\
> > wr512-3gn|\
> > wr6202|\
> > wrtnode|\
> > diff --git a/target/linux/ramips/dts/WNDR3700V5.dts
> b/target/linux/ramips/dts/WNDR3700V5.dts
> > new file mode 100644
> > index 0000000..508ba86
> > --- /dev/null
> > +++ b/target/linux/ramips/dts/WNDR3700V5.dts
> > @@ -0,0 +1,122 @@
> > +/dts-v1/;
> > +
> > +#include "mt7621.dtsi"
> > +
> > +/ {
> > + compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
> > + model = "Netgear WNDR3700v5";
> > +
> > + memory@0 {
> > + device_type = "memory";
> > + reg = <0x0 0x8000000>;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,57600";
> > + };
> > +
> > + palmbus@1E000000 {
> > + spi@b00 {
> > + status = "okay";
> > +
> > + m25p80@0 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "mx25l12805d";
> > + reg = <0 0>;
> > + linux,modalias = "m25p80", "w25q128";
> > + spi-max-frequency = <10000000>;
> > +
> > + partition@0 {
> > + label = "u-boot";
> > + reg = <0x0 0x30000>;
> > + };
> > +
> > + partition@30000 {
> > + label = "u-boot-env";
> > + reg = <0x30000 0x10000>;
> > + read-only;
> > + };
> > +
> > + factory: partition@f30000 {
> > + label = "factory";
> > + reg = <0xf30000 0x10000>;
> > + read-only;
> > + };
> > +
> > + partition@50000 {
> > + label = "firmware";
> > + reg = <0x50000 0xfb0000>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + pcie@1e140000 {
> > + status = "okay";
> > +
> > + pcie0 {
> > + mt76@0,0 {
> > + reg = <0x0000 0 0 0 0>;
> > + device_type = "pci";
> > + mediatek,mtd-eeprom = <&factory 0x0004>;
> > + mediatek,5ghz = <0>;
> > + };
> > + };
> > +
> > + pcie2 {
> > + mt76@2,0 {
> > + reg = <0x1000 0 0 0 0>;
> > + device_type = "pci";
> > + mediatek,mtd-eeprom = <&factory 0x8004>;
> > + mediatek,2ghz = <0>;
> > + };
> > + };
> > + };
> > +
> > + ethernet@1e100000 {
> > + mtd-mac-address = <&factory 0x0000000c>;
> > + };
> > +
> > + pinctrl {
> > + state_default: pinctrl0 {
> > + gpio {
> > + ralink,group = "rgmii2", "mdio", "wdt";
> > + ralink,function = "gpio";
> > + };
> > + };
> > + };
> > +
> > + gpio-leds {
> > + compatible = "gpio-leds";
> > +
> > + power {
> > + label = "wndr3700v5:green:power";
> > + gpios = <&gpio0 18 0>;
> > + };
> > + };
> > +
> > + gpio-keys-polled {
> > + compatible = "gpio-keys-polled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + poll-interval = <20>;
> > +
> > + rfkill {
> > + label = "rfkill";
> > + gpios = <&gpio0 8 0>;
> > + linux,code = <0xf7>;
> > + };
> > + };
> > +
> > + gpio_export {
> > + compatible = "gpio-export";
> > + #size-cells = <0>;
> > +
> > + usbpower {
> > + gpio-export,name = "usbpower";
> > + gpio-export,output = <1>;
> > + gpios = <&gpio0 10 1>;
> > + };
> > + };
> > +};
> > diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> > index 0cfb8fb..a25f025 100644
> > --- a/target/linux/ramips/image/Makefile
> > +++ b/target/linux/ramips/image/Makefile
> > @@ -1058,7 +1058,7 @@ endif
> > #
> >
> > ifeq ($(SUBTARGET),mt7621)
> > - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
> pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626
> > + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
> pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 wndr3700v5 zbt-wg2626
> > endif
> >
> > define Device/mt7621
> > @@ -1115,6 +1115,11 @@ define Device/witi
> > IMAGE_SIZE := $(ralink_default_fw_size_16M)
> > endef
> >
> > +define Device/wndr3700v5
> > + DTS := WNDR3700V5
> > + IMAGE_SIZE := $(ralink_default_fw_size_16M)
> > +endef
> > +
> > define Device/zbt-wg2626
> > DTS := ZBT-WG2626
> > IMAGE_SIZE := $(ralink_default_fw_size_16M)
> > diff --git a/target/linux/ramips/mt7621/config-4.4
> b/target/linux/ramips/mt7621/config-4.4
> > index 862c8e9..6d93c1d 100644
> > --- a/target/linux/ramips/mt7621/config-4.4
> > +++ b/target/linux/ramips/mt7621/config-4.4
> > @@ -179,7 +179,7 @@ CONFIG_NET_MEDIATEK_SOC=y
> > CONFIG_NET_VENDOR_MEDIATEK=y
> > CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
> > # CONFIG_NO_IOPORT_MAP is not set
> > -CONFIG_NR_CPUS=4
> > +CONFIG_NR_CPUS=2
> > CONFIG_OF=y
> > CONFIG_OF_ADDRESS=y
> > CONFIG_OF_ADDRESS_PCI=y
> > diff --git a/target/linux/ramips/mt7621/profiles/netgear.mk
> <http://netgear.mk> b/target/linux/ramips/mt7621/profiles/netgear.mk
> <http://netgear.mk>
> > new file mode 100644
> > index 0000000..05802a2
> > --- /dev/null
> > +++ b/target/linux/ramips/mt7621/profiles/netgear.mk
> <http://netgear.mk>
> > @@ -0,0 +1,17 @@
> > +#
> > +# Copyright (C) 2015 OpenWrt.org
> > +#
> > +# This is free software, licensed under the GNU General Public
> License v2.
> > +# See /LICENSE for more information.
> > +#
> > +
> > +define Profile/WNDR3700V5
> > + NAME:=Netgear WNDR3700v5
> > + PACKAGES:=\
> > + kmod-usb-core kmod-usb3
> > +endef
> > +
> > +define Profile/WNDR3700V5/Description
> > + Package set compatible with the Netgear WNDR3700v5.
> > +endef
> > +$(eval $(call Profile,WNDR3700V5))
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel@lists.openwrt.org
> <mailto:openwrt-devel@lists.openwrt.org>
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org <mailto:openwrt-devel@lists.openwrt.org>
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
