lets try to figure out what they changed by comparing the sercomm uboot sources of the unit with RTSDK original
On 28/03/2016 17:58, L. D. Pinney wrote: > Sercomm hacked bootloader replaced with my own from : > https://github.com/gnubee-git/GnuBee-MT7621-uboot.git > > Relevent files and instructions can be downloaded from : > https://drive.google.com/open?id=0B0CKglNyN0URM2FhVDBpNkVsRlk > > Some Devices are 'uncooperative' Reset and WPS switches, and LEDs other than > power. > > Radios are still non-functional. (MT7662E and MT7603EN) > > Device has the single-core MediaTek MT7621S. > > How should CONFIG_NR_CPUS=2 be set in the kernel config ... most other > devices will need CPUS=4 ?? i think you can override the cpu count via cmdline try maxcpus=2 ? > > Signed-off-by: L. D. Pinney <ldpin...@gmail.com> > > --- > > target/linux/ramips/base-files/etc/board.d/01_leds | 3 ++ > target/linux/ramips/base-files/etc/board.d/02_network | 1 + > target/linux/ramips/base-files/etc/diag.sh | 1 + > target/linux/ramips/base-files/lib/ramips.sh | 3 ++ > target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ramips/dts/WNDR3700V5.dts | 122 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > target/linux/ramips/image/Makefile | 7 +++- > target/linux/ramips/mt7621/config-4.4 | 2 +- > target/linux/ramips/mt7621/profiles/netgear.mk | 17 ++++++++++ > 9 files changed, 155 insertions(+), 2 deletions(-) > > diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds > b/target/linux/ramips/base-files/etc/board.d/01_leds > index 5816e60..a396212 100755 > --- a/target/linux/ramips/base-files/etc/board.d/01_leds > +++ b/target/linux/ramips/base-files/etc/board.d/01_leds > @@ -264,6 +264,9 @@ whr-600d) > wnce2001) > set_wifi_led "$board:green:wlan" > ;; > +wndr3700v5) > + ucidef_set_led_default "power" "POWER" "$board:green:power" "0" > + ;; > wt3020) > ucidef_set_led_default "power" "power" "$board:blue:power" "0" > ;; > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index 4b65d36..8c804b2 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -81,6 +81,7 @@ ramips_setup_interfaces() > whr-300hp2|\ > whr-600d|\ > witi|\ > + wndr3700v5|\ > wsr-1166|\ > wsr-600|\ > wt1520|\ > diff --git a/target/linux/ramips/base-files/etc/diag.sh > b/target/linux/ramips/base-files/etc/diag.sh > index daa7fb1..2f34aff 100644 > --- a/target/linux/ramips/base-files/etc/diag.sh > +++ b/target/linux/ramips/base-files/etc/diag.sh > @@ -26,6 +26,7 @@ get_status_led() { > nbg-419n|\ > pwh2004|\ > wnce2001|\ > + wndr3700v5|\ > x5|\ > x8|\ > xdxrn502j) > diff --git a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh > index 5f1df7b..e67ac8d 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -454,6 +454,9 @@ ramips_board_detect() { > *"WNCE2001") > name="wnce2001" > ;; > + *"WNDR3700v5") > + name="wndr3700v5" > + ;; > *"WR512-3GN-like"*) > name="wr512-3gn" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index c329dce..db9d7de 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -133,6 +133,7 @@ platform_check_image() { > wli-tx4-ag300n|\ > wmr-300|\ > wnce2001|\ > + wndr3700v5|\ > wr512-3gn|\ > wr6202|\ > wrtnode|\ > diff --git a/target/linux/ramips/dts/WNDR3700V5.dts > b/target/linux/ramips/dts/WNDR3700V5.dts > new file mode 100644 > index 0000000..508ba86 > --- /dev/null > +++ b/target/linux/ramips/dts/WNDR3700V5.dts > @@ -0,0 +1,122 @@ > +/dts-v1/; > + > +#include "mt7621.dtsi" > + > +/ { > + compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc"; > + model = "Netgear WNDR3700v5"; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x8000000>; > + }; > + > + chosen { > + bootargs = "console=ttyS0,57600"; > + }; > + > + palmbus@1E000000 { > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "mx25l12805d"; > + reg = <0 0>; > + linux,modalias = "m25p80", "w25q128"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@f30000 { > + label = "factory"; > + reg = <0xf30000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0xfb0000>; > + }; > + }; > + }; > + }; > + > + pcie@1e140000 { > + status = "okay"; > + > + pcie0 { > + mt76@0,0 { > + reg = <0x0000 0 0 0 0>; > + device_type = "pci"; > + mediatek,mtd-eeprom = <&factory 0x0004>; > + mediatek,5ghz = <0>; > + }; > + }; > + > + pcie2 { > + mt76@2,0 { > + reg = <0x1000 0 0 0 0>; > + device_type = "pci"; > + mediatek,mtd-eeprom = <&factory 0x8004>; > + mediatek,2ghz = <0>; > + }; > + }; > + }; > + > + ethernet@1e100000 { > + mtd-mac-address = <&factory 0x0000000c>; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + gpio { > + ralink,group = "rgmii2", "mdio", "wdt"; > + ralink,function = "gpio"; > + }; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + > + power { > + label = "wndr3700v5:green:power"; > + gpios = <&gpio0 18 0>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + > + rfkill { > + label = "rfkill"; > + gpios = <&gpio0 8 0>; > + linux,code = <0xf7>; > + }; > + }; > + > + gpio_export { > + compatible = "gpio-export"; > + #size-cells = <0>; > + > + usbpower { > + gpio-export,name = "usbpower"; > + gpio-export,output = <1>; > + gpios = <&gpio0 10 1>; > + }; > + }; > +}; > diff --git a/target/linux/ramips/image/Makefile > b/target/linux/ramips/image/Makefile > index 0cfb8fb..a25f025 100644 > --- a/target/linux/ramips/image/Makefile > +++ b/target/linux/ramips/image/Makefile > @@ -1058,7 +1058,7 @@ endif > # > > ifeq ($(SUBTARGET),mt7621) > - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 > re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626 > + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 > re6500 sap-g3200u3 ubnt-erx witi wf-2881 wndr3700v5 zbt-wg2626 > endif > > define Device/mt7621 > @@ -1115,6 +1115,11 @@ define Device/witi > IMAGE_SIZE := $(ralink_default_fw_size_16M) > endef > > +define Device/wndr3700v5 > + DTS := WNDR3700V5 > + IMAGE_SIZE := $(ralink_default_fw_size_16M) > +endef > + > define Device/zbt-wg2626 > DTS := ZBT-WG2626 > IMAGE_SIZE := $(ralink_default_fw_size_16M) > diff --git a/target/linux/ramips/mt7621/config-4.4 > b/target/linux/ramips/mt7621/config-4.4 > index 862c8e9..6d93c1d 100644 > --- a/target/linux/ramips/mt7621/config-4.4 > +++ b/target/linux/ramips/mt7621/config-4.4 > @@ -179,7 +179,7 @@ CONFIG_NET_MEDIATEK_SOC=y > CONFIG_NET_VENDOR_MEDIATEK=y > CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y > # CONFIG_NO_IOPORT_MAP is not set > -CONFIG_NR_CPUS=4 > +CONFIG_NR_CPUS=2 > CONFIG_OF=y > CONFIG_OF_ADDRESS=y > CONFIG_OF_ADDRESS_PCI=y > diff --git a/target/linux/ramips/mt7621/profiles/netgear.mk > b/target/linux/ramips/mt7621/profiles/netgear.mk > new file mode 100644 > index 0000000..05802a2 > --- /dev/null > +++ b/target/linux/ramips/mt7621/profiles/netgear.mk > @@ -0,0 +1,17 @@ > +# > +# Copyright (C) 2015 OpenWrt.org > +# > +# This is free software, licensed under the GNU General Public License v2. > +# See /LICENSE for more information. > +# > + > +define Profile/WNDR3700V5 > + NAME:=Netgear WNDR3700v5 > + PACKAGES:=\ > + kmod-usb-core kmod-usb3 > +endef > + > +define Profile/WNDR3700V5/Description > + Package set compatible with the Netgear WNDR3700v5. > +endef > +$(eval $(call Profile,WNDR3700V5)) > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
