Sercomm hacked bootloader replaced with my own from : https://github.com/gnubee-git/GnuBee-MT7621-uboot.git
Relevent files and instructions can be downloaded from : https://drive.google.com/open?id=0B0CKglNyN0URM2FhVDBpNkVsRlk Some Devices are 'uncooperative' Reset and WPS switches, and LEDs other than power. Radios are still non-functional. (MT7662E and MT7603EN) Device has the single-core MediaTek MT7621S. How should CONFIG_NR_CPUS=2 be set in the kernel config ... most other devices will need CPUS=4 ?? Signed-off-by: L. D. Pinney <ldpin...@gmail.com> --- target/linux/ramips/base-files/etc/board.d/01_leds | 3 ++ target/linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 ++ target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/WNDR3700V5.dts | 122 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ target/linux/ramips/image/Makefile | 7 +++- target/linux/ramips/mt7621/config-4.4 | 2 +- target/linux/ramips/mt7621/profiles/netgear.mk | 17 ++++++++++ 9 files changed, 155 insertions(+), 2 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 5816e60..a396212 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -264,6 +264,9 @@ whr-600d) wnce2001) set_wifi_led "$board:green:wlan" ;; +wndr3700v5) + ucidef_set_led_default "power" "POWER" "$board:green:power" "0" + ;; wt3020) ucidef_set_led_default "power" "power" "$board:blue:power" "0" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 4b65d36..8c804b2 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -81,6 +81,7 @@ ramips_setup_interfaces() whr-300hp2|\ whr-600d|\ witi|\ + wndr3700v5|\ wsr-1166|\ wsr-600|\ wt1520|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index daa7fb1..2f34aff 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -26,6 +26,7 @@ get_status_led() { nbg-419n|\ pwh2004|\ wnce2001|\ + wndr3700v5|\ x5|\ x8|\ xdxrn502j) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 5f1df7b..e67ac8d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -454,6 +454,9 @@ ramips_board_detect() { *"WNCE2001") name="wnce2001" ;; + *"WNDR3700v5") + name="wndr3700v5" + ;; *"WR512-3GN-like"*) name="wr512-3gn" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index c329dce..db9d7de 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -133,6 +133,7 @@ platform_check_image() { wli-tx4-ag300n|\ wmr-300|\ wnce2001|\ + wndr3700v5|\ wr512-3gn|\ wr6202|\ wrtnode|\ diff --git a/target/linux/ramips/dts/WNDR3700V5.dts b/target/linux/ramips/dts/WNDR3700V5.dts new file mode 100644 index 0000000..508ba86 --- /dev/null +++ b/target/linux/ramips/dts/WNDR3700V5.dts @@ -0,0 +1,122 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc"; + model = "Netgear WNDR3700v5"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l12805d"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@f30000 { + label = "factory"; + reg = <0xf30000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0004>; + mediatek,5ghz = <0>; + }; + }; + + pcie2 { + mt76@2,0 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8004>; + mediatek,2ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0x0000000c>; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "rgmii2", "mdio", "wdt"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "wndr3700v5:green:power"; + gpios = <&gpio0 18 0>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 8 0>; + linux,code = <0xf7>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 10 1>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 0cfb8fb..a25f025 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -1058,7 +1058,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 wndr3700v5 zbt-wg2626 endif define Device/mt7621 @@ -1115,6 +1115,11 @@ define Device/witi IMAGE_SIZE := $(ralink_default_fw_size_16M) endef +define Device/wndr3700v5 + DTS := WNDR3700V5 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef + define Device/zbt-wg2626 DTS := ZBT-WG2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) diff --git a/target/linux/ramips/mt7621/config-4.4 b/target/linux/ramips/mt7621/config-4.4 index 862c8e9..6d93c1d 100644 --- a/target/linux/ramips/mt7621/config-4.4 +++ b/target/linux/ramips/mt7621/config-4.4 @@ -179,7 +179,7 @@ CONFIG_NET_MEDIATEK_SOC=y CONFIG_NET_VENDOR_MEDIATEK=y CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y # CONFIG_NO_IOPORT_MAP is not set -CONFIG_NR_CPUS=4 +CONFIG_NR_CPUS=2 CONFIG_OF=y CONFIG_OF_ADDRESS=y CONFIG_OF_ADDRESS_PCI=y diff --git a/target/linux/ramips/mt7621/profiles/netgear.mk b/target/linux/ramips/mt7621/profiles/netgear.mk new file mode 100644 index 0000000..05802a2 --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/netgear.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WNDR3700V5 + NAME:=Netgear WNDR3700v5 + PACKAGES:=\ + kmod-usb-core kmod-usb3 +endef + +define Profile/WNDR3700V5/Description + Package set compatible with the Netgear WNDR3700v5. +endef +$(eval $(call Profile,WNDR3700V5)) _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
