I've just changed the fpa2 value to 0x25502f28 (Port 5 is force enabled now) so swconfig shows the port as "Link down".
RTL8211CL isn't a switch.It's just a gigabit PHY and other 4 ports of this router is connected to the intergated switch:-) 2015-02-19 16:01 GMT+08:00 Mikko Hissa <mikko.hi...@werzek.com>: > > On 19 Feb 2015, at 09:45, 郭传鈜 <gch981...@gmail.com> wrote: > > Portmap?This value is only for the default VLAN config of the switch > right? But the problem I'm facing is that the link status of port 5 is > always "link down" even if I plugged in the network cable:-( > > > Actually no, the switch has like two logical switches and it doesn't > forward packets between those two (LAN/WAN). > Does swconfig show the port as disabled? > > > 2015-02-19 15:24 GMT+08:00 Mikko Hissa <mikko.hi...@werzek.com>: > >> Hi! >> >> On 19 Feb 2015, at 04:14, 郭传鈜 <gch981...@gmail.com> wrote: >> >> Hello,everyone! >> There is a kind of Huawei HG255D which has an RTL8211CL Gigabit PHY and >> We are trying to add support for it. >> But I can't find anything about the RGMII and mdio-bus in any dts file of >> rt305x-based devices:-( >> The only device I found which used the interface is WL-351 with an >> RTL8366 switch but it doesn't use the MDIO interface to control it. I >> tried to copy the fpa2 and fct2 value from WL-351.dts but ,of course, it >> doesn't work. >> Then I tried to do the following: >> >> https://github.com/981213/openwrt/commit/47fa84df4dcc9b8bfe49ed2211d463ed014e2df2 >> >> >> Yes, there's that and then you need to configure registers for gdma2 in >> the ethernet driver... Register a second netdev and map packets, to the >> corresponding netdev/gdma (in/out) interface, by dma descriptors. >> >> OR >> >> In the dst file under the esw, change the value of portmap to 3f. >> XD >> >> >> but it doesn't work too. >> Could someone please tell me what should I do in the dts file and how can >> I reset the PHY? >> >> >> Sorry for my bad English:-) >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> >> > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
