> On 19 Feb 2015, at 09:45, 郭传鈜 <gch981...@gmail.com> wrote: > > Portmap?This value is only for the default VLAN config of the switch right? > But the problem I'm facing is that the link status of port 5 is always "link > down" even if I plugged in the network cable:-(
Actually no, the switch has like two logical switches and it doesn't forward packets between those two (LAN/WAN). Does swconfig show the port as disabled? > > 2015-02-19 15:24 GMT+08:00 Mikko Hissa <mikko.hi...@werzek.com > <mailto:mikko.hi...@werzek.com>>: > Hi! > >> On 19 Feb 2015, at 04:14, 郭传鈜 <gch981...@gmail.com >> <mailto:gch981...@gmail.com>> wrote: >> >> Hello,everyone! >> There is a kind of Huawei HG255D which has an RTL8211CL Gigabit PHY and We >> are trying to add support for it. >> But I can't find anything about the RGMII and mdio-bus in any dts file of >> rt305x-based devices:-( >> The only device I found which used the interface is WL-351 with an RTL8366 >> switch but it doesn't use the MDIO interface to control it. I tried to copy >> the fpa2 and fct2 value from WL-351.dts but ,of course, it doesn't work. >> Then I tried to do the following: >> https://github.com/981213/openwrt/commit/47fa84df4dcc9b8bfe49ed2211d463ed014e2df2 >> >> <https://github.com/981213/openwrt/commit/47fa84df4dcc9b8bfe49ed2211d463ed014e2df2> > > Yes, there's that and then you need to configure registers for gdma2 in the > ethernet driver... Register a second netdev and map packets, to the > corresponding netdev/gdma (in/out) interface, by dma descriptors. > > OR > > In the dst file under the esw, change the value of portmap to 3f. > XD > > >> but it doesn't work too. >> Could someone please tell me what should I do in the dts file and how can I >> reset the PHY? >> >> >> Sorry for my bad English:-) >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org <mailto:openwrt-devel@lists.openwrt.org> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> <https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel> > >
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
