On Mon, 2015-02-16 at 08:10 +0100, John Crispin wrote: > > On 16/02/2015 00:15, Paul Blazejowski wrote: > > 00 KHz AUTO), (N/A, 2000 mBm), (0 s) > > [ 21.730000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), > > (N/A, 2000 mBm), (0 s) > > [ 21.740000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), > > (N/A, 2000 mBm), (N/A) > > [ 21.750000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > > (N/A, 0 mBm), (N/A) > > [ 22.170000] ath9k ar934x_wmac: Direct firmware load for > > soc_wmac.eeprom failed with error -2 > > [ 22.180000] ath: phy0: Unable to load EEPROM file soc_wmac.eeprom > > [ 22.190000] ath9k ar934x_wmac: failed to initialize device > > [ 22.190000] ath9k: probe of ar934x_wmac failed with error -22 > > [ 22.200000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) > > [ 22.220000] ath9k 0000:00:00.0: Direct firmware load for > > pci_wmac0.eeprom failed with error -2 > > [ 22.230000] ath: phy1: Unable to load EEPROM file pci_wmac0.eeprom > > [ 22.230000] ath9k 0000:00:00.0: Failed to initialize device > > [ 22.240000] ath9k: probe of 0000:00:00.0 failed with error -22 > > [ 29.760000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > > probably related to this -> https://dev.openwrt.org/ticket/18992 > > do a "cat /tmp/sysinfo/*" please
nope sir, just replied to your other mail...but here it is again: root@router:~# cat /tmp/sysinfo/* wndr3700v4 NETGEAR WNDR3700v4 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
