I can confirm that it does work, i don't no where or why it didn't the previous time. I did a clean clone and used a clean config and now everything looks to be oké.
Bootlog is attached: confirmed working: Boot: Yes Ethernet: Yes WiFI: Yes Luci: Yes (used to scan for wifi) If you want me to test something else or something specific please let me know. John Crispin schreef op 16-2-2015 om 9:10: > > > On 16/02/2015 01:17, Michaël Zweers wrote: >> It builds oke now, >> >> but its doesn't boot on my device. i don't get to see any (informative) >> boot error's (see log). >> >> >> >> John Crispin schreef op 15-2-2015 om 22:16: >>> >>> >>> On 15/02/2015 21:44, Michaël Zweers wrote: >>>> >>>> Hello, >>>> >>>> I got a error message (kernel compile log included) when building v3.18 >>>> for wr703n. >>>> >>>> If you need additional info let me know. >>>> >>>> >>> >>> please retry, i just pushed a fix >>> > > > can some one confirm that wr703n fails to boot ? if so i will go to the > shop today and get one. >
*********************************************
* U-Boot 1.1.4MGZ MOD_V1 (Jun 24 2014) *
*********************************************
AP121 (AR9331) U-Boot for TL-WR703N
DRAM: 32 MB DDR 16-bit
FLASH: Winbond W25Q128 (16 MB)
CLOCKS: 400/400/200/33 MHz (CPU/RAM/AHB/SPI)
LED on during eth initialization...
Hit any key to stop autobooting: 0
Booting image at: 0x9F020000
Image name: OpenWrt r44459
Image type: MIPS Linux Kernel Image (lzma compressed)
Data size: 1205952 Bytes = 1.2 MB
Load address: 0x80060000
Entry point: 0x80060000
Uncompressing kernel image... OK!
Starting kernel...
[ 0.000000] Linux version 3.18.7 (user@HartOfGold) (gcc version 4.8.3
(OpenWrt/Linaro GCC 4.8-2014.04 r44459) ) #1 Mon Feb 16 10:26:18 CET 2015
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 8128
[ 0.000000] Kernel command line: board=TL-WR703N console=ttyATH0,115200
rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28324K/32768K available (2627K kernel code, 131K rwdata,
544K rodata, 208K init, 193K bss, 4444K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz,
Ref:25.000MHz
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-WR703N v1
[ 0.380000] Switched to clocksource MIPS
[ 0.380000] NET: Registered protocol family 2
[ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.390000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.400000] TCP: reno registered
[ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.420000] NET: Registered protocol family 1
[ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.450000] msgmni has been set to 55
[ 0.450000] io scheduler noop registered
[ 0.460000] io scheduler deadline registered (default)
[ 0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud =
1562500) is a AR933X UART
[ 0.480000] console [ttyATH0] enabled
[ 0.480000] console [ttyATH0] enabled
[ 0.490000] bootconsole [early0] disabled
[ 0.490000] bootconsole [early0] disabled
[ 0.500000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.500000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.510000] 5 tp-link partitions found on MTD device spi0.0
[ 0.510000] Creating 5 MTD partitions on "spi0.0":
[ 0.520000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.520000] 0x000000020000-0x0000001468c0 : "kernel"
[ 0.530000] mtd: partition "kernel" must either start or end on erase block
boundary or be smaller than an erase block -- forcing read-only
[ 0.540000] 0x0000001468c0-0x000000ff0000 : "rootfs"
[ 0.540000] mtd: partition "rootfs" must either start or end on erase block
boundary or be smaller than an erase block -- forcing read-only
[ 0.560000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.560000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.570000] 0x0000005a0000-0x000000ff0000 : "rootfs_data"
[ 0.580000] 0x000000ff0000-0x000001000000 : "art"
[ 0.580000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.620000] libphy: ag71xx_mdio: probed
[ 1.220000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04
[uid=004dd041, driver=Generic PHY]
[ 1.230000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.230000] TCP: cubic registered
[ 1.230000] NET: Registered protocol family 17
[ 1.240000] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.250000] Bridge firewalling registered
[ 1.250000] 8021q: 802.1Q VLAN Support v1.8
[ 1.270000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.280000] Freeing unused kernel memory: 208K (8039c000 - 803d0000)
procd: Console is alive
procd: - watchdog -
[ 4.130000] usbcore: registered new interface driver usbfs
[ 4.140000] usbcore: registered new interface driver hub
[ 4.140000] usbcore: registered new device driver usb
[ 4.150000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.160000] ehci-platform: EHCI generic platform driver
[ 4.170000] ehci-platform ehci-platform: EHCI Host Controller
[ 4.170000] ehci-platform ehci-platform: new USB bus registered, assigned
bus number 1
[ 4.180000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.210000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.210000] hub 1-0:1.0: USB hub found
[ 4.210000] hub 1-0:1.0: 1 port detected
[ 4.220000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.230000] ohci-platform: OHCI generic platform driver
procd: - preinit -
[ 5.530000] random: mktemp urandom read with 8 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
jffs2 is ready
No jffs2 marker was found
[ 8.930000] jffs2: notice: (349) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0
dead, 0 orphan) found.
switching to overlay
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 11.780000] NET: Registered protocol family 10
[ 11.800000] tun: Universal TUN/TAP device driver, 1.6
[ 11.800000] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 11.810000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.830000] Loading modules backported from Linux version
master-2014-11-04-0-gf3660a2
[ 11.840000] Backport generated by backports.git backports-20141023-2-g4ff890b
[ 11.850000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.860000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
[ 11.920000] xt_time: kernel timezone is -0000
[ 11.950000] cfg80211: Calling CRDA to update world regulatory domain
[ 11.980000] cfg80211: World regulatory domain updated:
[ 11.980000] cfg80211: DFS Master region: unset
[ 11.980000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.990000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.000000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.010000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.020000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.030000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 12.040000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 12.040000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 12.050000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 12.140000] PPP generic driver version 2.4.2
[ 12.150000] NET: Registered protocol family 24
[ 12.230000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 12.230000] cfg80211: Calling CRDA for country: US
[ 12.250000] cfg80211: Regulatory domain changed to country: US
[ 12.260000] cfg80211: DFS Master region: FCC
[ 12.260000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.270000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000
mBm), (N/A)
[ 12.280000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 1700 mBm), (N/A)
[ 12.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2300 mBm), (0 s)
[ 12.300000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000
mBm), (N/A)
[ 12.310000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
procd: - init complete -
[ 24.540000] device eth0 entered promiscuous mode
[ 24.550000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 24.660000] eth0: link up (10Mbps/Half duplex)
[ 24.660000] br-lan: port 1(eth0) entered forwarding state
[ 24.670000] br-lan: port 1(eth0) entered forwarding state
[ 24.680000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 26.670000] br-lan: port 1(eth0) entered forwarding state
[ 80.590000] random: nonblocking pool is initialized
BusyBox v1.22.1 (2015-02-16 10:13:57 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
CHAOS CALMER (Bleeding Edge, r44459)
-----------------------------------------------------
* 1 1/2 oz Gin Shake with a glassful
* 1/4 oz Triple Sec of broken ice and pour
* 3/4 oz Lime Juice unstrained into a goblet.
* 1 1/2 oz Orange Juice
* 1 tsp. Grenadine Syrup
-----------------------------------------------------
root@OpenWrt:/# cat /proc/version
Linux version 3.18.7 (user@HartOfGold) (gcc version 4.8.3 (OpenWrt/Linaro GCC
4.8-2014.04 r44459) ) #1 Mon Feb 16 10:26:18 CET 2015
root@OpenWrt:/#
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
