Hi, I've got a WRT54GS v1.0 and trying to run r41004 on it. I'm having trouble with assignment of GPIOs.
The model number on the case, serial no, MAC and FCC ID all match a WRT54GS v1.0 according to: https://wikidevi.com/wiki/Linksys_WRT54GS_v1.0 But my nvram has these board parameters: boardtype=0x0101 boardnum=42 boardrev=0x10 (full nvram dump: http://pastebin.com/FVkddFSi) which in arch/mips/bcm47xx/board.c gets mapped to: {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"}, with these LED definitions: bcm47xx_leds_linksys_wrt54gsv1[] __initconst = { BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), }; I have DMZ and power LEDs, but they're on different GPIOs, and I don't have a WPS LED (front panel looks like this: http://www.rootdir.de/linksys_wrt54gs/wrt54gs_rev1.1_5.jpg). I did some experimentation and this is my GPIO layout: GPIOs 0-15, ssb_chipco_gpio: gpio-0 (sysfs ) out hi WLAN LED active high gpio-1 (sysfs ) out lo PWR LED 0=blink 1=on gpio-2 (adm_eecs ) in lo gpio-3 (adm_eesk ) in lo gpio-4 (sysfs ) in hi gpio-5 (adm_eedi ) in lo gpio-6 (adm_eerc ) in hi RESET BTN active low gpio-7 (sysfs ) in hi DMZ LED active low gpio-8 (sysfs ) in lo gpio-9 (sysfs ) in lo gpio-10 (sysfs ) in lo gpio-11 (sysfs ) in lo gpio-12 (sysfs ) in lo gpio-13 (sysfs ) in lo gpio-14 (sysfs ) in lo gpio-15 (sysfs ) in lo which most closely matches WRTSL54GS (except no WPS LED). The ADM pins also might be wrong (despite definitions in the nvram that point to those pins). My switch gets detected but when I do "swconfig switch0 show" my system reboots. It feels like I have a WRT54GS v1.0 hardware with WRT54G NVRAM. Does anyone have a WRT54GS v1.0 nvram dump to compare? WRTSL54GS dump would also be nice. Catalin _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
