AFAIK anyone with a Neufbox 6 should be able to test if the problem happens on 
SMP + SPI flash.

I don't have any SMP + SPI flash brcm63xx device that is currently supported by 
OpenWrt.
When Florian releases the BCM3380 patches I'll be able to test this with my 
Netgear CG3100Dv3.

Regards,
Álvaro.

El 01/02/2014 11:35, José Vázquez escribió:
>>
>> I'm pretty sure that the jffs2 file name corruption problem doesn't
>> happen BCM63xx SoCs with spi flash and smp enabled, so, if this is
>> correct, seems to be a race condition between the flash type, jffs2
>> and some Broadcom SoCs, as Jonas pointed some time ago.
> Can somebody confirm is the problem disappears running openwrt in a
> smp capable BCM63xx with SPI flash?
>>
>> These warnings are easily reproducible enabling the mentioned options
>> in the kernel.
>>
>> Initially my intention was to send this information to linux-mips but,
>> because these warnings can be repeated easily i think that this should
>> be discussed by more skilled and experienced people.
>>
>> Some other options inside "Kernel hacking" couldn't be tested because
>> with them enabled the CFE of the VR-3025un was unable to uncompress
>> the firmware.
>>
>> Regards:
>>
>> José
>>
> 
> Forgot to mention that, even though BCM6358 and BCM6368 send the
> mentioned warnings, file name corruption only happens in the BCM6368
> when enabling SMP.
> 
> Besides, danitool, adding isolcpus=0 and activating bit 5 in register
> $22, 2 made the problem much less serious, but it still remains, and
> in addition, he achieved a significant increase in network throughput
> with a Netgear DGND3700 v1. With that configuration almost all the
> hardware irqs are driven by cpu0.
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to