Hi,
On 3 April 2013 12:38, gianluca a <gianluc...@hotmail.it> wrote:
> Subject: [PATCH] [brcm68xx] led support for board DWV-S0
This is brcm63xx, not 68xx ;-)
> Patch based on Attitude Adjustement 12.09, svn 36141
Please base all patches on trunk, not any branches. Patches will be
backported as applicable.
> Signed-off-by: Gianluca A. <gianluc...@hotmail.it>
>
> Index: a/arch/mips/bcm63xx/boards/board_bcm963xx.c
Please create this as a patch for OpenWrt, not for the kernel. So this
should be a patch adding a patch or modifying a patch.
> ===================================================================
> --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> @@ -1754,6 +1754,95 @@ static struct board_info __initdata boar
>
> .has_ohci0 = 1,
> .has_ehci0 = 1,
> +
> + .leds = {
> + {
> + .name = "DWV-S0:red:power",
> + .gpio = 5,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:green:power",
> + .gpio = 4,
> + .active_low = 1,
> + .default_trigger = "default-on",
> + },
> + {
> + .name = "DWV-S0:red:fastweb",
> + .gpio = 6,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:green:fastweb",
> + .gpio = 7,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:green:linea",
I think it would be a good idea to give these leds english names - not
everyone speaks italian :)
> + .gpio = 2,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:red:linea",
> + .gpio = 12,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:red:wifi",
> + .gpio = 10,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:green:voce",
Likewise.
> + .gpio = 9,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:red:voce",
> + .gpio = 0,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:red:ethernet",
> + .gpio = 1,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:green:ethernet",
> + .gpio = 8,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:red:USB",
> + .gpio = 11,
> + .active_low = 1,
> + },
> + {
> + .name = "DWV-S0:green:USB",
> + .gpio = 3,
> + .active_low = 1,
> + },
> + },
> +
> + .buttons = {
> + {
> + .desc = "reset",
> + .gpio = 37,
> + .active_low = 1,
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> + },
> + {
> + .desc = "wps",
> + .gpio = 34,
> + .active_low = 1,
> + .type = EV_KEY,
> + .code = KEY_WPS_BUTTON,
> + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> + },
> + },
> +
> };
>
> /* D-Link DSL-274xB revison C2/C3 */
> ----------------------------------------------------------------------
>
> Gianluca
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
