This adds support for the Allnet ALL6000 board to the Kernel. See http://www.allnet.de/entwicklungsplatformen.html?&L=0
Since the previous post, I merged my changes with the new target layout by Luka,
and included the suggested correction in the board-setup.
Signed-off-by: Daniel Golle <dgo...@allnet.de>
diff --git a/target/linux/kirkwood/patches/000-boards.patch
b/target/linux/kirkwood/patches/000-boards.patch
index 4fe376e..dc7c35d 100644
--- a/target/linux/kirkwood/patches/000-boards.patch
+++ b/target/linux/kirkwood/patches/000-boards.patch
@@ -1,17 +1,18 @@
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -18,5 +18,8 @@ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2
+@@ -18,5 +18,9 @@ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
+obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
+obj-$(CONFIG_MACH_NSA310) += nsa-310-setup.o
++obj-$(CONFIG_MACH_ALL6000) += all6000-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -130,6 +130,24 @@ config MACH_T5325
+@@ -130,6 +130,29 @@ config MACH_T5325
Say 'Y' here if you want your kernel to support the
HP t5325 Thin Client.
@@ -33,6 +34,11 @@
+ Say 'Y' here if you want your kernel to support the
+ ZyXEL NSA-310 board.
+
++config MACH_ALL6000
++ bool "Allnet ALL6000"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Allnet ALL6000 board.
endmenu
endif
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/all6000-setup.c
b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/all6000-setup.c
new file mode 100644
index 0000000..58df8a5
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/all6000-setup.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-kirkwood/all6000-setup.c
+ *
+ * ALL6000 Board Setup
+ *
+ * Copyright (C) 2012 Daniel Golle <dgo...@allnet.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+static struct mtd_partition all6000_nand_parts[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x80000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uboot-env",
+ .offset = 0x80000,
+ .size = 0x20000,
+ }, {
+ .name = "ubi0",
+ .offset = 0x100000,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+/* PHY addresses from u-boot mii info */
+static struct mv643xx_eth_platform_data all6000_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct mv643xx_eth_platform_data all6000_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data all6000_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data all6000_mvsdio_data = {
+ .gpio_card_detect = 28,
+ .gpio_write_protect = 38, /* microSD => n.c.? */
+};
+
+static unsigned int all6000_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP8_TW0_SDA,
+ MPP9_TW0_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GE1_TXD0,
+ MPP21_GE1_TXD1,
+ MPP22_GE1_TXD2,
+ MPP23_GE1_TXD3,
+ MPP24_GE1_RXD0,
+ MPP25_GE1_RXD1,
+ MPP26_GE1_RXD2,
+ MPP27_GE1_RXD3,
+ MPP28_GPIO, /* SD Status */
+ MPP29_GPIO, /* USB Power Enable */
+ MPP30_GE1_RXCTL,
+ MPP31_GE1_RXCLK,
+ MPP32_GE1_TCLKOUT,
+ MPP33_GE1_TXCTL,
+ MPP34_SATA1_ACTn,
+ MPP35_SATA0_ACTn,
+ MPP36_AU_SPDIFI,
+ MPP37_AU_SPDIFO,
+ MPP38_GPIO, /* SD Sw Wp */
+ MPP39_TDM_SPI_CS0,
+ MPP40_TDM_SPI_SCK,
+ MPP41_TDM_SPI_MISO,
+ MPP42_TDM_SPI_MOSI,
+ MPP43_TDM_CODEC_INTn,
+ MPP44_TDM_CODEC_RSTn,
+ MPP45_TDM_PCLK,
+// MPP46_TDM_FS
+ MPP46_GPIO, /* HDD PWR CTRL */
+// MPP47_TDM_DRX
+ MPP47_GPIO, /* FAN PWR CTRL */
+ MPP48_TDM_DTX,
+ MPP49_GPIO, /* USB FLAGA */
+ 0
+};
+
+
+static struct i2c_board_info __initdata all6000_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("ALL6000", 0x0e),
+ },
+};
+
+static int __init all6000_pci_init(void)
+{
+ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+ kirkwood_pcie_init(KW_PCIE0);
+ return 0;
+};
+subsys_initcall(all6000_pci_init);
+
+static void __init all6000_init(void)
+{
+ kirkwood_init();
+ kirkwood_mpp_conf(all6000_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(all6000_nand_parts), 25);
+ kirkwood_sdio_init(&all6000_mvsdio_data);
+
+ if (gpio_request_one(29, GPIOF_OUT_INIT_HIGH, "USB Power Enable"))
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&all6000_ge00_data);
+ kirkwood_ge01_init(&all6000_ge01_data);
+
+ kirkwood_sata_init(&all6000_sata_data);
+
+ i2c_register_board_info(0, all6000_i2c_info,
+ ARRAY_SIZE(all6000_i2c_info));
+
+ kirkwood_i2c_init();
+
+}
+
+MACHINE_START(NAXY1200, "Allnet ALL6000")
+ /* Maintainer: Daniel Golle <dgo...@allnet.de> */
+ .atag_offset = 0x100,
+ .init_machine = all6000_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
+MACHINE_END
pgpA6mEmeEgF8.pgp
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
