Also as bluetooth i/f. It is correct according to the evaliuation board schematics, but it must be used also as spare general purpose UART. We've initiated the blutooth support from the menuconfig hoping that this would wake up UART0, but finally it did not work.

Spyros


On 24/3/2012 7:04 μμ, simon h wrote:
The BT Homehub V2B uses the second port by default.  The first port
appears to be used for DECT communication.

On Sat, Mar 24, 2012 at 6:01 PM, Conor O'Gorman<i...@conorogorman.net>  wrote:
On Thu, 2012-03-22 at 18:44 +0100, John Crispin wrote:
On 22/03/12 17:48, Spyridon Tompros wrote:
As a workaround We've tried to implement another USB port by using an
external Vinculum VNC1L Chip. It works connected to a serial port. The
problem we encounter now is that the UART0 port of the Danube seems
dead.... We discovered that even if we write the respective register
(MCON), it remains incactive. Moreover we've tried to include the UART0
as console from the make menuconfig util and the result was the same.

Has anybody activated the second serial port of Danube?

Hi,

It has worked in the past, but i have not tried it in a while, i have a
twinpass baord with 2 serial ports and will add this on my todo list for
tomorrow

Might be a problem in (not) setting the PMU_PWDSR (Power Down Register).
UART0 appears to default to off. Might be some CGU actions needed also.

Conor


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



--
Best Regards,
Spyridon Tompros

----------------------------------------
Dr. Ing. Spyridon Tompros
36 GE Lebon, 1160 Brussels
tel:+322.5133076
www.qualtek.eu
----------------------------------------

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to