Hi,
thanks a lot for the support.
Spyros
On 22/3/2012 6:44 μμ, John Crispin wrote:
On 22/03/12 17:48, Spyridon Tompros wrote:
Dear all,
we have been using OpenWRT on Lantiq's evaluation board with the
following details.
Target Lantiq GPON/XWAY
Subtarget Danube
Target Profile (EASY50712)
We have tested the following the following USB drivers provided with the
latest openwrt/trunk version (downloaded yesterday):
-Kmod-usb-core
-Kmod-usb2
-Kmod-serial-to-usb
In all cases we observe lost packets when sending files to a PC and
receiving them back. Some times the kernel crashes, while crashes happen
always when we try to physically connect a USB HUB or a media USB device.
As a workaround We've tried to implement another USB port by using an
external Vinculum VNC1L Chip. It works connected to a serial port. The
problem we encounter now is that the UART0 port of the Danube seems
dead.... We discovered that even if we write the respective register
(MCON), it remains incactive. Moreover we've tried to include the UART0
as console from the make menuconfig util and the result was the same.
Has anybody activated the second serial port of Danube?
Hi,
It has worked in the past, but i have not tried it in a while, i have a
twinpass baord with 2 serial ports and will add this on my todo list for
tomorrow
John
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Best Regards,
Spyridon Tompros
----------------------------------------
Dr. Ing. Spyridon Tompros
36 GE Lebon, 1160 Brussels
tel:+322.5133076
www.qualtek.eu
----------------------------------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
