On Thu, 2012-03-22 at 18:44 +0100, John Crispin wrote: > On 22/03/12 17:48, Spyridon Tompros wrote: > > As a workaround We've tried to implement another USB port by using an > > external Vinculum VNC1L Chip. It works connected to a serial port. The > > problem we encounter now is that the UART0 port of the Danube seems > > dead.... We discovered that even if we write the respective register > > (MCON), it remains incactive. Moreover we've tried to include the UART0 > > as console from the make menuconfig util and the result was the same. > > > > Has anybody activated the second serial port of Danube? > > > Hi, > > It has worked in the past, but i have not tried it in a while, i have a > twinpass baord with 2 serial ports and will add this on my todo list for > tomorrow >
Might be a problem in (not) setting the PMU_PWDSR (Power Down Register). UART0 appears to default to off. Might be some CGU actions needed also. Conor _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
