On Sun, May 08, 2011 at 10:33:30AM +0200, John Crispin wrote: >>> I also looked up at those arcadyan board configs, and some of them have >>> XXXXXXXX_EBU addess and XXXXXXXX_USB pin defined. >>> I know that on this router usb power is on gpio 29( gpl source says that ) >> >> So you'll have to define it for your board in the call to xway_register_dwc >> (mach-arv45xx.c). >> > > if it was 29 on ifxmips/ it will be 29 on lantiq/. only the stp and ebu > gpios were mapped to new offsets. the first 32 gpios stayed the same. > > can oyu make a photograph of the pcb ? after seeing a photo i can tell > you if the unit has stp or ebu gpios
http://wiki.openwrt.org/_media/toh/gigaset/dsc00453.jpg http://wiki.openwrt.org/_media/toh/gigaset/sam5943.jpg I could make more detailed photos if these are not good enough. Luka _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
