Al 05/03/11 21:25, En/na John Crispin ha escrit: > On 05/03/11 21:20, Luca Olivetti wrote: >> Al 05/03/11 21:16, En/na John Crispin ha escrit: >> >>>> Ok, I have to tell it where the firmware files are on the command line: >>>> >>>> root@OpenWrt:/lib/firmware# tapidemo --path /lib/firmware/ >>>> TAPI Demo Version 5.0.1.27 >>>> VAD is set to: IFX_TAPI_ENC_VAD_NOVAD - no voice activity detection. >>>> Err with ioctl cmd SIOCGIFADDR Cannot assign requested address. (File: >>>> ./tapidemo.c, line: 3657) >>>> CompileIFX_MPS: CPU1 base address is invalid! >>>> IFX_MPS: firmware download error (-1)! >>>> d for EASY50712. >>>> Used board(s) EASY50712. >>>> Filesystem firmware binary used (/lib/firmware/danube_firmware.bin). >>>> Filesystem BBD binary used (/lib/firmware/danube_bbd_fxs.bin). >>>> Err, Failed download FW. (File: ./device_vmmc.c, line: 718) >>>> Err, Channel 0 is not initialized. (File: ./board_easy50712.c, line: 563) >>>> Err, Board Initialization failed (Idx 0). (File: ./tapidemo.c, line: 4331) >>>> >>>> >>>> Bye >>> >>> >>> hi, >>> >>> what openwrt revision are you using ? >> >> 25626 >> >> Bye > > Hi, > > can you try if it works if ath9k is not loaded please
Just unloading ath modules: no difference. Rebuilding the image with the "arv7518_register_ath9k" call removed: no difference. Isn't it due to cp1_base assignment being commented out in arch/mips/lantiq/setup.c? Bye -- Luca _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
