Al 05/03/11 15:30, En/na Luca Olivetti ha escrit: > > Well, I tried with all packages selected properly but the result wasn't very > encouraging. > > First this log message: > > IFX_MPS: CPU1 base address is invalid! > IFX_MPS: firmware download error (-1)! > > (probably because cp1_base assignment is commented out in > arch/mips/lantiq/setup.c?) > > Then this when trying tapidemo: > > root@OpenWrt:/# tapidemo > TAPI Demo Version 5.0.1.27 > VAD is set to: IFX_TAPI_ENC_VAD_NOVAD - no voice activity detection. > Err with ioctl cmd SIOCGIFADDR Cannot assign requested address. (File: > ./tapidemo.c, line: 3657) > Compiled for EASY50712. > Used board(s) EASY50712. > Error, firmware file voice_danube_firmware.bin is not found. > (File: ./device_vmmc.c, line: 196) > Error, required binaries files are not downloaded. > (File: ./device_vmmc.c, line: 688) > Err, Channel 0 is not initialized. (File: ./board_easy50712.c, line: 563) > Err, Board Initialization failed (Idx 0). (File: ./tapidemo.c, line: 4331)
Ok, I have to tell it where the firmware files are on the command line: root@OpenWrt:/lib/firmware# tapidemo --path /lib/firmware/ TAPI Demo Version 5.0.1.27 VAD is set to: IFX_TAPI_ENC_VAD_NOVAD - no voice activity detection. Err with ioctl cmd SIOCGIFADDR Cannot assign requested address. (File: ./tapidemo.c, line: 3657) CompileIFX_MPS: CPU1 base address is invalid! IFX_MPS: firmware download error (-1)! d for EASY50712. Used board(s) EASY50712. Filesystem firmware binary used (/lib/firmware/danube_firmware.bin). Filesystem BBD binary used (/lib/firmware/danube_bbd_fxs.bin). Err, Failed download FW. (File: ./device_vmmc.c, line: 718) Err, Channel 0 is not initialized. (File: ./board_easy50712.c, line: 563) Err, Board Initialization failed (Idx 0). (File: ./tapidemo.c, line: 4331) Bye -- Luca _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
