Hi, > The CFE of the WRT54G3GV2 expects two firmware images, if one of them > produces a CRC error (which is the case after you installed OpenWrt, as > there is no second image), it writes one of three consecutive bytes to > the flash. (Look for "Image Status : IMG2_BAD" during boot.) > > After the third boot with a CRC error, it stops and waits for a new > firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot. is this a stable possibility to use the complete 16MB for a single image?
I finally managed to port another patch for the flashmap driver and the firmware-tools to prevent overriding the second images space. Now the device works quite stable with 8MB and without any nvram tweeking. Try trunk with r22019 or newer. /Markus _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
