On Wed, Feb 24, 2010 at 9:48 PM, Steve Brown <sbr...@cortland.com> wrote: > On 2/24/2010 11:34 AM, Kövesdi György wrote: >>> >>> You could start with providing some more informations. >>> like: dmesg output, lsmod output, /proc/bus/pci, logread and whatever >>> else seems useful. >>> >> >> The boot log and the directory contents of /sys/bus/pci/ are attached. The >> command lspci says nothing. Maybe problems with pci? The 'Support for PCI >> controller' is switched on in the config. >> >>> >>> If you have a working revision, you can also bisect the problem. >>> >> >> Unfortunately it is far away. BTW is it possible to read its flash >> content? >> The image is not available other way. >> >> Thanx >> K. Gy. >> > > From your boot.log, it looks like you have built the ehci and uhci drivers. > > This usb2 core requires the ehci driver (usb2) and the ohci driver (ohci). > The ohci driver initializes the core. The uhci driver doesn't apply to this > hardware.
Is there a way to select a special hardware profile (like select Asus WL500GPv2) in trunk? In trunk, there is way to specify the Asus WL500GP: (X) ASUS WL-500g Premium The problem is that there are 2 versions, v1 and v2, and the hardware is different. So which version is missing? -- Benjamin Henrion <bhenrion at ffii.org> FFII Brussels - +32-484-566109 - +32-2-4148403 "In July 2005, after several failed attempts to legalise software patents in Europe, the patent establishment changed its strategy. Instead of explicitly seeking to sanction the patentability of software, they are now seeking to create a central European patent court, which would establish and enforce patentability rules in their favor, without any possibility of correction by competing courts or democratically elected legislators." _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
