On 2/24/2010 11:34 AM, Kövesdi György wrote:
You could start with providing some more informations.
like: dmesg output, lsmod output, /proc/bus/pci, logread and whatever
else seems useful.
The boot log and the directory contents of /sys/bus/pci/ are attached. The
command lspci says nothing. Maybe problems with pci? The 'Support for PCI
controller' is switched on in the config.
If you have a working revision, you can also bisect the problem.
Unfortunately it is far away. BTW is it possible to read its flash content?
The image is not available other way.
Thanx
K. Gy.
From your boot.log, it looks like you have built the ehci and uhci
drivers.
This usb2 core requires the ehci driver (usb2) and the ohci driver
(ohci). The ohci driver initializes the core. The uhci driver doesn't
apply to this hardware.
Steve
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
