what about dmesg ??? mine has output for
eth0: Atheros AR231x: 00:15:6d:a8:2b:48, irq 4 ar2313_eth_mii: probed eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01) and ath_hal: module license 'Proprietary' taints kernel. ath_hal: 2008-10-02 (AR5212, AR5312, RF5111, RF5112, RF2316, RF2317, REGOPS_FUNC, TX_DESC_SWAP, DFS, XR) ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk) ath_rate_minstrel: look around rate set to 10% ath_rate_minstrel: EWMA rolloff level set to 75% ath_rate_minstrel: max segment size in the mrr set to 6000 us wlan: mac acl policy registered though mine a different device totally, dmesg would show something On Sun, Dec 21, 2008 at 12:39 AM, Stephen Gutknecht (hilltx) < step...@hilltx.com> wrote: > On Fri, Dec 19, 2008 at 9:09 AM, Bastian Bittorf <bitt...@bluebottle.com> > wrote: > > * Stephen Gutknecht (hilltx) <step...@hilltx.com> [19.12.2008 16:45]: > >> r...@openwrt:/# lspci -G > >> Trying method 1......using /sys/bus/pci...OK > >> Decided to use linux-sysfs > > > > don't be shy: cat /proc/pci ? > > > > bye, Bastian > > > Took me a while to stumble into the fact that in 2.6 it is now > /proc/bus/pci/devices - anyway, cat returns no output. > > I've also now built a firmware with both 2.6.26 and 2.6.27 OpenWRT and > neither one will show anything. > > Any other tips or suggestions? Is there some chunk of memory we can dd > from? > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
