On Fri, Dec 19, 2008 at 12:59 AM, Warren Turkal <w...@penguintechs.org> wrote: > Does lspci work on the box? > > wt > > On Wed, Dec 17, 2008 at 1:15 PM, Stephen Gutknecht (hilltx) > <step...@hilltx.com> wrote: >> I'm trying to figure out if ath9k should even work on these chips. >> I've installed the latest subversion OpenWRT on but none madwifi, >> ath5k, and ath9k all fail to recognize the wireless. >> >> Watching the factory firmware, the 2.6.15 kernel booting emits >> "Atheros AR9100 WiSoC" message. planex mzk-w300nh router is one such >> example. Poking around on the internet, I find these references: >> >> http://www.kernel.org/pub/linux/kernel/ … y-hal/ah.c >> >> case AR5416_AR9100_DEVID: >> return "Atheros AR9100 WiSoC"; >> >> That AR5416_AR9100_DEVID tag seems to be referenced in: >> >> https://dev.openwrt.org/browser/trunk/package/ath9k/src/drivers/net/wireless/ath9k/ath9k.h?rev=11884 >> >> Is it simply a matter that the hardware ID on our routers isn't >> matching this one exactly? How do I go about finding my ID? Help and >> pointers appreciated. The ath9k mailing list send me back over here >> ;) Thank you.
Is there something wrong with my compile of OpenWRT? lspci not supported on this architecture? KAMIKAZE (bleeding edge, r13670) r...@openwrt:/# uname -a Linux OpenWrt 2.6.26.8 #3 Wed Dec 17 00:05:00 CST 2008 mips unknown r...@openwrt:/# lspci r...@openwrt:/# lspci -G Trying method 1......using /sys/bus/pci...OK Decided to use linux-sysfs r...@openwrt:/# Also - if anyone can help - I've seen references to 2.6.27 kernel and OpenWRT, "make menuconfig" I'm not finding an options. do I have to hand-edit the .config, what do I need to change? thanks. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
